Satellite L500-1ZP - sound problem after bios update

Similar Questions

• Re: Satellite L500-1XL - display problem after BIOS update

  Hello!

  I recently received a Satellite L500-1XL, works fine until I gave it to my friend...
  The problem is that he has updated the bios to V 2.10 (don't know why) and since then, the image on the screen appears as 15.4 "even in the bios.

  Any ideas what could cause the problem?

  Thank you

  Can you please make a picture how he looks in and post here?
  2.10 is the right version and I really put t understand what is the problem.

  Toshiba welcome screen appears as usual?

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Satellite M100 - no speakers sound thorugh after BIOS update

  Hi all

  I have satelite M100 PSMAAA-02006 with XP. I just updated the Bios on V3.0. Speakers do not work after update but the audio jack works so with headphones I can listen to but not through Laptop speakers and the keys to media on top of keyboard play, pause, stop, next, back, etc. homepage react too much.

  Someone knows the solution to this issue. Or is it possible to get the old BIOS? Although I not sure aboutt previous version.

  need quick help. Please answer as soon as possible.

  Thanks & best regards...

  Hi Julie,.

  I doubt that this was due the update of the BIOS. Is that what you have loaded default settings after updating the BIOS?
  Have you chosen the correct BIOS update?

  Normally you can hear the sound on the speakers laptop if you disconnect the headset. Make sure that the sound is not muted, you can do this with the FN + ESC key combination.

  About the multimedia keys, I would recommend reinstallation of Toshiba common Modules. You can find it on the Toshiba site.

• Satellite Pro A200 - problem after BIOS update

  Help!

  Tried the BIOS update, got the screen blue, computer laptop doesn't work anymore, any chance I can reset the BIOS?
  Sorry for the vaugeness of the position enough to receive the message without reason below

  "Your message contains profanity or inappropriate language. In the interest of your fellow forum users, we ask you to change your message. »

  Hello

  I'm sorry to hear that. It's a really bad situation now. Unfortunately, I do not believe there is something you can do alone and I'm afraid that you need professional help.
  The best thing you can do is to contact the nearest authorized service provider.

  They can help you.

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• PAVILION NOTEBOOK 15 K7Q21EA #: SCROLLING WINDOWS PROBLEM AFTER BIOS UPDATED 10 (08/03/2016) PAVILION 15 YESTERDAY 16/10/2016

  CANNOT CONTROL THE SCROLLING. CURSOR DOWN TO THE LOW WHAT MAKES IMPOSSIBLE TO SAVE TO A FOLDER

  Hi @STICKMAN5124,

  Nice day! Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. It will be a pleasure to help you.

  I saw the post and understand that after only a bios updated cursor drops down due to a problem of scrolling.

  Impressive work, do the update of the bios. Kudos to you for this. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP. You have been great to work with.

  Please check in F2 diagnostics if the scrollbar works correctly. If Yes, then you can update the chipset drivers and http://hp.com/drivers touchpad drivers you can also consult with a mouse external further isolate the issue.

  You can also run diagnostics on the touchpad from this link by going to the UEFI F2 diagnostics: http://support.hp.com/in-en/document/c03467259 please run the complete components. If any component fails, please note the failure code. This is done to determine if the problem is hardware or software partners.

  If it passes and scrolling works very well, please perform these updates. If you are still having the same problem on page F2 UEFI (screen) then you could roll back bios after performing a hard reset. Link for the hard reset: http://support.hp.com/us-en/document/c01684768

  • Please perform this step to roll back bios.  Hold down the "Windows" key and the letter "B" at the same time, then press the power also button for about 5 seconds at the same time.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Satellite C660D - screen is black after BIOS update

  Hello!

  I need your help to solve the problem that I have...

  I have Satellite C660D - 1 3, I was upgrading bios up-to-date and poster ON but black screen, ventolidor work and open and close leitor dvd...

  no idea what problem? And how to solve?

  I'm waiting for.

  Thank you.

  André Pedro.

  I'm afraid that the BIOS is doomed and the BIOS update was not successfully. It is not easy to fix.
  On this forum I found similar thread, then you can read and perhaps solve the problem.
  Check it out.

  https://Forum.Toshiba.EU/showthread.php?54395&TSTART=0

• Satellite M30-304 - strange questions after BIOS update

  Hi all

  I updated my BIOS according to the good driver for Satellite M30. However, since this operation took the endless problems with screen and wireless card. Also the screen used to display flash BIOS only now them a Centrino, Centrino logo sometimes sometimes Mr. Pentium, I don't know that the version of BIOS is incorrect for my laptop. If I try to re - install the upgrade, it is said version already installed 1.7, so will not continue.

  1. is there a way to force the re - install the same version?
  2. someone can the upgrade me of the correct BIOS Setup for the model n ° PSM30E-0QKJ1-5U, I installed the version was 20070807154017

  The history is quite interesting. AFAIK Centrino logo is there if the Centrino platform is in use.

  The Centrino platform consists of:
  an Intel Pentium M processor
  a chipset Intel 855 of the series
  an Intel PRO/Wireless 2100 or later 2200 (IEEE 802 11 b) mini-PCI wireless adapter

  If a component is removed (Intel PRO/Wireless mini-PCI wireless adapter) the Centrino logo will disappear. I don't really know why logo is from time to time, but you did the right BIOS update. There is no other for your laptop model.

  Can you please tell me what is the problem with your wireless network adapter? You can use just sporadically or what?

• Satellite L650 - Touchpad turn off after BIOS update

  Hello
  I recently got a new laptop, a L650-1CN,.
  I run different types of software from Toshiba, and one of them is Tempro,
  He shows me messages when a new update is available.

  Today I saw the message that a new BIOS update v.1.80 was available.
  I downloaded and installed. After installing my laptop closed. Then I started again.
  But after a few minutes, I noticed that my touchpad disable itself more.
  I usually use a logitech wireless mouse.

  Now, I wonder if I should do a system restore and not install this update of the BIOS or find another solution for this problem. Because it's really boring.

  Thanks in advance.

  Hey Buddy,

  Usually the touchpad disable automatically if an external mouse is connected, but only if you enable this option in the touchpad settings.

  I also use an external Logitech mouse and have enabled this option. You can find it in Control Panel > mouse. Go to the device settings tab and mark the internal pointing device option disable when the external USB pointing device is attached.

  I hope it works :)

• UEFI problem after BIOS update

  Hello

  I've recently updated the version of BIOS for the Envy 15 J049TX.

  After the windows update shows "not properly configured SecureBoot.

  Please suggest a solution

  Hi Provost,

  I'm happy to announce that I have overcome the problem of activation of the SecureBoot. I saw an option in BIOS-> setting-> 'HP Factory loading key' Boot. After I loaded the default keys to toggle SecureBoot option has become active and I was able to activate SecureBoot. I applied the last update of the BIOS and has been able to activate SecureBoot successfully after the update.

  I wanted to know if this method is safe and that there can be no other effects on the other parts of the system.

  Thank you very much for the help.

• Satellite A200-1fj - black screen after BIOS update

  Hello guys,.

  I'm planing to update my bios for this version

  http://support.toshiba-tro.de/tools/EULA/calleula.asp?ID=63108

  and my pc got little froze and lag then I close the program that has Flash my bios and restart my turn then black screen... I search and found this thread talking about the BIOS recovery and there seemed not workin for me (I use my 8 GB flash memory) and just do Fn + B when I press the power button to start and then the power led becomes orange... and nothing happens...

  Everyone please provide me the bios file just for this model and give me a clear instruction to Flash my bios with my flash (8 GB) memory

  W8 your replay guys, thx

  + The message was edited: link removed - unauthorized 3rd party Forum +.

  If the BIOS update was not properly flashed, the ROM should generally be flashed with a disc of crisis of the BIOS.
  This can be done by authorized Toshiba available in your country.
  Then get in touch with the ASP to solve this problem.

• Satellite L305D asking a password after BIOS UPDATE

  I have a Satellite L305 series and recently updated the bios, once the system has restarted his request now a password.

  I never put a password on that system and don't know how to get down the password.
  Is this a known issue with the 1.40 bios update or what, how also can this issue be resolved free of charge if the system is under warranty?

  Only to Toshiba Post screen and then give the password.
  Is it possible to get the system to boot from the bootable cd before asking for password update bios to the latest version if it is available?

  System is almost new...
  Help, please

  It's really strange are you sure you used a good BIOS?

  However, there is only one real solution; you need the help of a technician of the ASP.

  The point is that it of not possible to remove the BIOS password without any help of ASP. Only ASP technician can remove it and how to do this.

  That's why ask ASP in your country a help!

  Good luck buddy

• Tecra 8100 problem after BIOS update

  Greetings
  I have a tecra 8100, 700 mhz with 256RAM,.
  and it works a treat, until I decided to update the BIOS, the date of the previous version was 1999!

  As I run an OS linux on this unit, I downloaded a version of the Bios boot image and loaded on startup, it reported the success of the update.

  My problem now is that the system starts fine but extremely short slow,.
  It takes 15 minutes to start and is virtually unusable.

  I ran several tests of comparative analysis and tests of memory of Hiram boot CD and the only problem in the report was my 700 CPU running at 114.82. And of couse running, the CPU runs at 100%.

  I deleted the cmos data and be restarted using the default BIOS settings.
  Long searched the net and cannot find an answer.

  Help, please.
  was soon Munka

  Post edited by: munka

  Hello

  I visited the European driver of Toshiba page and found the latest version of BIOS that is 2, 50 - WIN.
  Do you use it?

  The BIOS can be updated only run under windows! That's why I m surprised that you were able to update the BIOS, the Linux operating system running on this computer.

  Try to download the most recent BIOS version and update as described on the help page of the BIOS update.

  concerning