Satellite L500 - second module of memory not recognized

Similar Questions

• Tecra M3 (PTM30E) - new module of memory not recognized

  Hello

  I have a Tecra M3 PTM30E 09X01LEN and am trying to upgrade the memory - addition to the 512 MB, it came with.

  I bought an upgrade memory of 1 GB Toshiba - PC2-4300 DDR2-553 and tried to install it in the housing B (leaving the original card where he was). As far as I know I've followed the instructions in the manual (which is pretty poor, since it is just of the drawings), but the new memory is not recognized.

  What can I do else?

  Hello

  Strange but perhaps your new RAM module is defective or the second memory location.

  Have you tried the new memory module in the first place?
  What happens if you put the original 512 MB module in the second slot? The module is recognized?

  Check it!

• Satellite L500-128 - FN keys do not work with Win 7 64 bit

  Satellite L500-128 - FN keys do not work with the help of the operating system Windows 7 x 64

  Hello

  Satellite L500-128 belongs to the series of PSLJ3E.
  The European driver Toshiba page contains all drivers for this unit.

  Next to the installation of value-added package, you will need to install the Flash Cards Support utility v 1.63.0.4.
  Buttons controls the FN Flash Cards!

• After the upgrade to windows 10 my DVD player and second HARD drive is not recognized

  Hello.

  I upgraded my laptop - Acer Aspire 7552 G - 10 Windows Home and now my DVD player and the second HARD disk is not recognized by the system. In Device Manager, the material is indicated under "Unknown devices" and I tried almost everrything and searched for a solution in-house. Hope that there is someone who has a solution to this.

  Key of the Windows logo + x
  Click on Device Manager

  If the yellow exclamation mark or unknow device is present
  Double click on it
  Choose the tab "Details".
  in the drop-down list, select HardwareIDs
  Click the first value and paste here

• Compaq Presario SR5010NX: One of the two locations of memory not recognized / work

  Had already upgraded RAM from 512 to 1 GB.  In an attempt to level again with a 2nd (identical to the first) 1 GB DDR2 DIMMS, I discovered that the 2nd module of memory was not being recognized.  I also tried with success the new! G in the first taken.  Specification to support up to 2 GB with 1 GB DDR2 DIMMS in each shot. However, "no beeps" and not "start with anything in the second taken.   I also tried two 256 KB RAM modules and as the two 1Gs only the a 256 KB has been recognized.

  I also tried to boot with a module in the 2nd outlet only and found that my system wouldn't start.  Any suggestion would be appreciated.

  C001uS

  Thanks again for your response.  I went not the CMOS battery. However, your answer made me look on a possible revision of the BIOS through HP customer care.  I downloaded the version of BIOS the same but with a more recent date.

  After download and install I shut down my computer, insert the 2nd module of 1 G and made a new shoe.

  Happiness is a system of 2 GB Dual Channel now running.

  PROBLEM SOLVED

• Re: Satellite L500/050 - FN buttons do not work

  Hi all

  I have recently reinstalled Windows 7 64 bit on my * Toshiba Satellite L500/050 * who had the same system as soon as possible.

  But I managed to mess up my backup partition and I had try to reinstall all the drivers from the internet, but the problem is that it gives weird results.

  For the first part of the key Fn does not work even after I have installed and reinstalled PVAT countless times and the other thing is that my LCD Brightness increasing when I decrease and vice versa. (0% were more high-brightness 100% has lower, when the brightness is grayed out by the computer, it actually increases).

  There may be others I do not know for sure now this kind of problems, but I think that my laptop does not work as well as he used to.
  Can someone give the list or step by step instructions on how to uninstall and install all my drivers for this.

  Thanking you inadvance.

  See you soon.

  Hello

  It seems that your model of laptop belongs to the Australian series of Toshiba.
  Please check this page of the Toshiba Australia driver:
  http://www.MyToshiba.com.au/support/download

  Here you can find the required drivers for the FN key.

  As far as I know that you will install the VAP (value added package) and the Support of Flash memory card utility.

  Welcome them

• Satellite L500 PSLS0A - internal webcam does not work

  Hello

  I was wondering if someone could help me out here. I have a built-in webcam and who doesn't, but I would like to make it work again. I don't know if the software has been removed.

  Does anyone know what brand these webcams are i.e. Logitech?
  I don't have any CD when I bought this laptop (do not know if I threw them - silly me)

  Could someone point out to me which software I need to download? Very appreciated

  Details of the laptop
  ******************
  [Information on PC]
  Model name Satellite L500
  Part number PSLS0A - 08 p 002
  Version of the OS Microsoft Windows 7 Home Premium Service Pack 1 6.1.7601

  > Does anyone know what brand these webcams are i.e. Logitech?
  As far as I know the internal webcam module is Chicony.

  Your laptop seems to be an Australian series of Toshiba.
  That's why the drivers and other software from Toshiba as webcam software are on the Australian page Toshiba ;)
  http://www.MyToshiba.com.au/support/computers/satellite/L500/psls0a-08p002/download?OS=24

• Satellite A200 PSAF6A - HARD drive is not recognized. No recovery of product

  The drive HARD in my Toshiba Satellite A200 PSAF6A-0US01N is not recognized in the machine or any other computer, so I can't run any windows/toshiba repair.

  I know that readers have a factory reset hidden on the disc and press 0 to the power upward, but with the unreadable disk, how can I repair my installation of Windows Vista?

  Hello

  If the HARD drive is not recognized by the BIOS or other laptops, then I would say that your HARD drive is defective.
  In this case, you need to replace the HARD drive.
  In this case, you will not be able to start the recovery procedure from the HARD drive because it works badly as he has already said

  Are you from the Australia? If you need a recovery disk, I recommend contacting the local Toshiba ASP to get this drive

• Satellite L500 CTRL + left click does not work in Windows 7 after update

  Hello
  I have a Satellite L500 running Win 7 64 bit. I have recently installed the latest windows updates and you've probably noticed that I can no longer select multiple items by holding the CTRL key and clicking on the left. This applies to files in Explorer, but also emails in outlook. When I try just hangs for a few seconds, but is unable to select multiple items. Someone else has encountered this or have any suggestions for healing?

  It is nothing lost in trying this Vista solution since there is no registry hacks etc [you cannot use keyboard shortcuts to select multiple items in Windows Explorer after installing some applications on a Windows Vista-based computer: http://support.microsoft.com/kb/934548/en-us]

• Satellite L500-164: 15.6 "does not appear fullscreen in games

  Hello

  I recently bought the L500-164 and installed Windows 7 64-bit. Everything works perfectly, just a thing which annoys me incredibly.

  Whenever I play a game (Counterstrike, Warcraft3, Warsow, soldier) is a big black band on the left and right, so basically the screen of the game resembles a quadrat. I saw even more on my old 15.4 "laptop, because he was able to view as wide screen.

  I installed the new catalyst, but is not possible within the REC to enlarge the screen of the game for the full amount...
  I really want to solve this problem and I hope for your help.

  Thank you!

  Hello

  Normally, every game, you can change the screen resolution and I think that you didn t set the resolution of the screen to the right. As far as I know the Satellite L500-164 has a native resolution of 1366 x 768. did you choose this resolution?
  If you choose another resolution that uses another format, you have these bands on the left and right sides.

  In addition, you must use the Toshiba display driver directly. Other drivers are not pre-tested and don t have protection against overheating.

• Satellite L500-19Z - recovery process is not complete properly?

  Trying to reinstall my system Windows 7 on a satellite L500-19Z. When I insert the recovery disk it ends and then restarts.

  When reboot it goes through the "system registry' and 'system settings' and then restarts. He said Athens 'set up for first use.
  Then it comes up with a white screen and the box saying "the finalization of installation - will take a few minutes" etc.

  However, after a while it just restarts and goes through the same sequence again - and again - and again etc.

  I can reboot into safe mode, but it will not make a system restore point.
  When I try to reboot normally it just goes back into the routine above.

  I tried a number of recovery disks, but they all do the same thing.

  > I tried a number of recovery disks, but they all do the same thing.
  This means that you have more for this model of laptop recovery disk?
  Did you use the right method?

  I'm not very well why the recovery procedure ends correctly, but it might be possible that your laptop s equipment is affected m.
  What was the purpose of a recovery? Something was wrong with the laptop?

• Satellite L500 PSLS0E - Menu FN does not work

  Now, I tried to connect my laptop to my TV again (I did it before using a cable HDMI and FN + F5, but not more.) but now for the first time I noticed that the fn does NOT bring the menu that he used to put in place when I pressed forward and I have no idea what is the cause.

  I tried to use google ect to find a solution and the thing I noticed, is that when I go to the start menu > all programs > TOSHIBA > utilities other people seem to have "Flash Cards" and "Flash Cards - setting" now all I have is help Flash Card, restart settings for Flash cards and Flash Cards. I mean just to see if it has to do with the problem anyway spend.

  I would like to know how to solve this problem, I already tried to install the package of value added, but it did not help at all, and this problem is probably caused by a me fiddling around with my laptop. Thanks in advance.

  PS:
  Toshiba Satellite L500 (thingy part number: PSLS0E) Windows 7 64 bit.

  Hmmmm... Usually Toshiba value added package relocation schould help.

  Try please once more to remove the system of VAP, restart your computer and install the latest version of the Toshiba download page.

• Re: Satellite L500 - 1UU BIOS Splash screen not visible anymore

  I activated the FAST Boot in the BIOS on my Satellite L500-1UU.
  The STARTUP SCREEN of my motherboard DOES NOT SHOWUP.
  I WOULD LIKE TO RE ENABLE IT.

  ADVISOR.

  Hello

  Why you n t set the BIOS back to default settings?
  Turn on the device, press F2, and then choose the default settings in the BIOS (I think you need to press F9).
  Save the changes and reboot.

• Satellite L500-1XZ - 'play' button do not run my Media Player

  Satellite L500-1XZ

  Why my button "play" do not start my default media player? If I manually start media player and use Play button works.

  Thank you

  Hi cuibusel,

  I put t know why this happens but the fact is that these buttons work only with Windows Media Player and not with other players such as WinAMP, etc..

  If you have several problems with them, I recommend to install the package of added value of the official website of Toshiba.

• DVD - RW for Satellite 2800-500: IDE1 error, disk not recognized

  Installation of a slim drive DVD - RW NEC ND6500 caused a message "Error IDE1" at startup and the drive was not recognized.
  The DVD-RW Toshiba SD - R6472 drive is not compatible with my Satellite 2800-500?
  Does anyone know a way to make someone of them work?

  [Edited by: admin on 22 July 05 17:57]

  Hello

  The problem is that all CD/DVD drives cannot work spirit all models of laptops. The problem is that there is no way to change to master or slave. AFAIK there is no public document that shows the discs and laptop computer compatibility.

  The best solution is to check if the drive is CSEL. In this case, it should work properly. If you can check please if you can find the CSEL notation on the label located on the upper side of driver s.

  Good bye