Satellite L500 - settings to enable sending emails on WLANs

Similar Questions

• Satellite L500 is not enabled switching

  Hi all

  I'm new to this forum. I got a Toshiba Satellite L500 attempt to fix and the fault is that the laptop has been stopped normally and now will not light.

  I checked the power adapter that is giving 19.25v. I have stripped the laptop down to the motherboard and checked where the DC plug is soldered to the motherboard and who also reads the 19.25v with the adapter plugged. Can someone suggest a possible cause.

  First impressions are a failure of the motherboard, but other ideas are welcome.

  Gary

  Your description is OK, but we still Don t know some facts.

  When the laptop is connected to power supply is power laptop LED works or not?
  Battery is RUN on (load)?

  This way virtual, we can only speculate what may be the problem, but if there is no power there problem with electronic control gear and, I fear, you need professional help with this m.

• Satellite P200-10O: can't send emails using Windows Vista Mail

  If anyone can help.

  I have a Satellite P200-10O, with Vista installed. In Win Mail I have configured my email as usual accounts.

  When i open Win Mail I can click on send and receive and he's looking for new messages, this can be repeated as often as you like. However, when I create a new message and click send it to stop working. The message is placed in the Outbox, if I open the Outbox and click on send, nothing happens, after awhile of trying every thing is blocked. If I then close the program and re open it will send the message but then sometimes send it and receive does not until you close and re open. Also message counters do not update.

  I tried everything I can think of, Vista, ISP, Toshiba forum. So far, no joy even if I'll get back in touch with Toshiba again. Message is configured to send immediately.

  No virus or firewall is used.

  See you soon
  1stopcarp

  Hi guys

  I think you should take a look at this Forum topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27336

  It is not a beautiful link to FAQ from Toshiba on the question paper + the will of Windows Mail Send or Receive emails.

  In addition, you should take a look at the support site for Microsoft Mail.

  Good luck

• Satellite L500 - how to enable the WLAN?

  I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
  I used to market its WIFI by pressing the FN + F8 keys.
  But now I can't on it using the method.
  I downloaded its end drivers.
  In reality its all the function keys do not work.
  Please let me know how to enable the WLAN and function keys.

  Hi kim2kjy,

  You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

  The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

  Check this box!

• Re: Cannot use map Intel 4965 WIFI Satellite L500

  Hello

  I have a Satellite L500-12N and I changed the standard WLAN for an Intel 4965, but my wireless stop job. None before the light is led. BIOS of wireless communication settings is on. In Device Manager it seems to set up correctly with no errors. FN + F8 does not help

  Can someone help me?
  Thank you

  What happen when you use the FN + F8 key combination?
  Is option ON / OFF available?

• Satellite L500-1WG: network card works no - 31 code

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP ROUTER 3 G via an adapter (Intel 82567) without success.

  Under the general tab device manager says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». Then I updated driver-> Windows has determined the software driver for your device is up to date. Always the same message coming in general tab.

  Anyone have similar problems?

  Sitiper

  Hi mate

  This device doesn't work properly? Is - this WLan or LAN card?
  I m a bit confused but

  As far as I know the LAN and Wlan cell phone support for Realtek card.
  So, you can download the two drivers from Realtek page directly.

  Please set the BIOS to the default settings before you relocate for the two pilots.

  I hope this will help you!

• Satellite L500-1WG WLAN WNAP A-Link connection gives 'blue screen '.

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP 3 G ROUTER via WIFI (Realtek RTL8191SE). Connection is established, but after a few seconds, I'm going to 'blue screen' and restart the laptop.

  A-Link WIFI connection works very well with my Nokia X 6 phone (S60).

  Any help?

  Sitiper

  Hello

  BSOD code, you get exactly?

  Have you tried to update the driver WLAN? You can find the latest version on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite L500-13D: all programs & settings are gone after upgrade to Windows 7

  Hello.

  My laptop is Satellite L500-13D

  I've upgraded to WINT in VISTA using official TSB upgrade disk.
  It seems that something was wrong. Win7 installed properly, but unfortunately all installed programs and settings are gone.
  I see also that when the upgrade $directories on C: and E partitions have been created; programs and older files are there.

  A few questions:

  1. is there a way to return return programs?
  2. how to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  3. download TOSHIBA RECOVERY CREATOR?

  Hi mate

  Have you read the manual that came with the laptop and Windows 7 upgrade disc?

  After an upgrade to Windows 7 you need additional disk with the upgrade tools that came with the Windows 7 upgrade disk.

  > 2. How to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  This is not possible because the recovery disk must be created at first running the operating system preinstalled by Toshiba.

  > 3. Download TOSHIBA RECOVERY CREATOR?
  If I know that cannot be downloaded.

• Re: Satellite L500-128 - how to restore factory settings?

  I have a Toshiba Satellite L500-128. A couple of months, I installed the upgrade to windows 7. Now, I want to clean my computer laptop everything. I want to restore the factory settings, but I have no idea how to do that. Does anyone has an idea how to solve this problem?

  Thank you

  Hey,.

  What do you want exactly?

  Normally it is easy to restore the factory settings. You need only the Toshiba Recovery disk you created, I think. Therefore, enter the disk and start it. The Setup menu will be loaded and you can follow the instructions on the screen. Factory settings will be restored with all the drivers and tools.

  Also, don't forget to backup your data. Everything on the HARD drive will be erased.

• HWsetup does not retain the settings on my new Satellite L500-11F

  Hello

  you just bought a Satellite L500-11F.
  I tried to connect to a WLAN, but every time I turn on the LAN with the hwsetup.exe, parameters of fall after a reboot necessary return to "off".
  Also the light in front of the laptop stays orange. Think it must be yellow to show a WLAN card activated.

  So, how can I change the hwsetups and keep them after the restart.

  Grateful for all the help

  I don't really know what you're doing, but for the activation of WLAN card use the WLAN switch and the FN + F8 key combination.
  You can update the WLAN switch on position but toggle wireless card with FN + F8 only. When you use option disable the WLAN led will be OFF.

  Check it out.

• Satellite L500 - noise Squeak and mic/noise issues

  Hello
  I hope you can help with my sound problems!

  I have a Satellite L500 which is 18mth old.

  * Something *.
  In March, I had problems with my microphone / sound. If I had my volume of more than 50%, I would get a terrible grinding sound feedback that has been difficult to mute (IE due support on mute a couple of times).

  As I got a 2-year warranty, I sent him away and they said they fixed it but is short-lived. The problem came immediately. The only solution I found to have its volume by more than 50% was to completely turn off the microphone.

  * Two problem *.
  For the last few weeks I've been to randomly make this top placed, continuous his squealing that occurs usually when I am in public with my laptop in my backpack (annoying!). I have to continue to support on mute for the squeal to stop. Interestingly, my cell phone is cut off when it starts. Sometimes, my phone is hot when it occurs. Is this overheating problem?

  All the solutions for both of my sound problems? Should I send it to get my warranty repair? When I argued that it was not fixed the first time, they said Windows is probably corrupt and is not under warranty.

  Thank you!

  Kat

  This should help you:

  + Hissing on the Satellite L500 +.
  + http://aps2.toshiba-tro.de/kb0/TSB0402UB0001R01.htm+

  This problem occurs if the volume of the microphone in the speakers properties is enabled.
  After you turn off this point the issue with Larsen is no longer in effect.

  If this isn't a hardware problem but to question. With the help of right settings will help you.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• Satellite L500-1UU - stop frequently

  Hi guys,.

  My new Satellite L500-1UU just randomly stop whenever I run all games (for example mass effect 1 and 2 war modern etc...) will be last only 3mins max then stop and even on the internet normal surfing. I have already send to service center authorized toshiba but on no occasion always same problem.

  I'm really really upset and frustrated. I just bought this in less than 3 months if I'm sending this even once, I don't know if they fixed it is good or not. Informed please help. Thank you

  I3 2.13 ghz
  ATI 5145
  hard drive 320

  Hey Buddy,

  You use the factory settings or you have installed your own version of Windows? Normally with factory settings (preinstalled Windows from Toshiba) everything should work correctly because this image is pre-tested by Toshiba. Otherwise, it might be a hardware problem.
  If you need to reinstall your laptop using the Toshiba recovery disc.

  Which driver you use display? You may use Toshiba drivers.

  In addition, it could be an overheating problem. You should try to clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.

• Satellite L500: touchpad stoped working

  Hello

  I have a Toshiba Satellite L500 laptop and all of a sudden my touchpad stop working.
  I tried to check the mouse options in Control Panel, but I find it still in there.

  No idea how fix it.
  What should I bring to a service center?

  Thank you

  Hello

  First of all; Please check if the touchpad has not been accidentally disabled.
  Check the FN + F9. This function activates and disables the touchpad.

  In addition, you can go to control panel-> mouse-> device settings
  Here, you should also check if the touchpad is enabled or disabled.

  Finally and above all an update of the driver touch pad or relocation could help

• Re: Satellite L500 - 1UU BIOS Splash screen not visible anymore

  I activated the FAST Boot in the BIOS on my Satellite L500-1UU.
  The STARTUP SCREEN of my motherboard DOES NOT SHOWUP.
  I WOULD LIKE TO RE ENABLE IT.

  ADVISOR.

  Hello

  Why you n t set the BIOS back to default settings?
  Turn on the device, press F2, and then choose the default settings in the BIOS (I think you need to press F9).
  Save the changes and reboot.