Satellite L500 will not connect WIFI (Windows 7)

Similar Questions

• My camera SonyDSC-S85 will not connect to windows 7 said no driver available, why go to this if it does not support my equipment

  My Sony DSC - S85 will not connect to windows 7. He said no driver is available I can't believe what is happening simply because do upgrades of windows I yo buy all new appliances and video equipment.

  You're right - the site of Sony says that your camera is not supported under Windows 32 or 64-Bit 7. However there is a simple solution - take the memory stick in and out of the camera and a card reader allows you to transfer your photos to your PC.

  If your PC does not have a card reader, you can buy USB very cheap ones. Just make sure it's one that can read the memory stick into your camera.

• IPhone will not connect to Windows

  Hello world

  I'm sure it's an old problem, but my iphone 4S does not connect to windows. When connected, it makes the sound of the connection and the accusations but itunes and windows explore does not see the phone. Same 3rd apps from third parties like copy Trans cannot see the iphone too.

  My ipod classic always connects.

  Have you ever tried the troubleshooting steps mentioned in this article?

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

• Satellite L500 will not load beyond the screen "Welcome".

  Hello

  My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.

  Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".

  Any help would be greatly appreciated.
  Thank you
  Kara

  The error message is not known to me and also looking in google didn t get advice.
  Maybe your Windows operating system is confusing upward.

  Have you tried to boot Win 7 in safe mode?
  Try this. Restart your laptop, press the F8 key.
  In advanced startup options, select the option called Mode without failure.

  If the laptop does not start Safe Mode, try the last good known Configuration option.

  If this n t help, try to fix my computer. Here, you can choose between different settings.
  Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!

  So be aware of this!

• Aspire One 722 just took out of box will not connect to windows update.

  I have 2 identical Aspire One notebooks 722 running AMD chipsets running Windows 7sp1 pro.                              (SNID [redacted to comply with guidelines]) that does not connect to update the window. I have the built-in System Restore on a single noteboook to see if that would fix it. It there no. This is the news, I had them on the Board for the protection of labour. I tried for a month now to get Microsoft updates to work.

  I tried all the fixes and the tools I find on the net and within Microsoft to get updated to work and have had no sucsses.

  I even went as far as buying a new hard drive and a new copy of Microsoft windows 7sp1 drive still does not work.

  Everything elese works fine I can join any network at work. Surf the web, download electronic music or programs. No problem at all with the part of it. I get no error message or it is just to update program and the bar just moves a day if I let him. I do it all the patches from microsoft, they say that all is well, or fixed and still nothing.

  Think it's strange that a new disc of win7sp1 with a new HD it still does not work. I'm at my wits end.

  Anyone out there have the magic bullet miss me?

  Sure could use some help on this. No I won't update to WIndows 10 and forget about it. Ha ha

  Well @ 12:10 CST, I learned that I had 205 updates installed plus 5 in option.

  So it is now was the installation of updates since then.

  So, it does not. In the review I, that I did not did nothing before.

  This time, I did a clean installation of the operating system. Installed all the latest drivers. A through the online activation.

  Click updates in short order says something about downloading a new engine update. Screen went white and Brown a few times. Back to update sceeen were he sat running for approximently 12 + hours. Then, the notification of the necessary updates. And now it's @ 65 of 209 updates (installation)

  When this is done, I will do the same to the other laptop and hoping for the same results.

  Thanks to everyone who gave me advice here. It was great to have you share your knowledge and your encougment.

• Satellite L500 will not start - Windows issue?

  My nephew is the owner of this laptop 1 year old and asked me for help yesterday.
  There's an eggtimer permanent on the mouse cursor and clicking on trackpad or any key does nothing.

  I ctrl, alt, del to open, and then select the Task Manager, but then the thing freezes. place then the only solution.
  I could not access my computer or start / programs, etc. by clicking on anything does nothing.

  I started in safe mode with network and updated & ran several programs - super antispyware, spybot, ccleaner & anti malwarebytes. the latter find stuff but unimportant or whatever it is was reported by none.

  It has none of the recovery disks because none was provided. He never made the recovery discs as advised when it is new, so I tried to make a series of discs, but it was impossible to read some files and I had to abort the operation.
  I have downloaded and run mechanic system but this found no real problems.

  When I try to open my computer, the answer is a long time to come and opens a page of help windows in m/s only. He advises the system restore but there ar no restore points available.

  When I tried to launch avg he behaved "very odd" to say the least. I uninstalled that too.

  I uninstalled several toolbars and games stuff that my nephew had but for all my efforts, above the situation remains the same. I'm trying to do a windows repair disk and will try that to see if it helps.

  I put the disc and restarted with poor results. He asked me to reinstall windows, and I agreed. I then, a long time later had a message saying that the computer has an error unexpectedly., restart to complete the installation.
  When I click ok to restart, the message is repeated. I retried several times - same result.

  I tried turning on off and powered by pressing f1 through f12 in turn. no difference.
  I think I need a new disk (64) of windows 7 or a recovery dvd set of toshiba.

  Any thoughts on recovering from a bad situation would be welcome.

  > I think I need a new disk (64) of windows 7 or a recovery dvd set of toshiba.
  > Any thoughts on recovering from a bad situation would be welcome.

  Yes, I agree with you at this stage that I would also try to reinstall a new Windows system or Toshiba Recovery disk image
  Usually the new OS install helps determine what s wrong here, from my point of view, it looks like the BONE was confusing to and installation of the operating system might solve this problem.

  But as you know, it's just a theory. I think that if would not help you with new installation OS (recovery), the next should be a RAM and HARD drive test

  What do you think?

• Satellite P200 will not connect to wireless internet

  I have a Toshiba Satellite P200-143.
  I changed my internet provider, but the Toshiba will connect to the internet only when the blue ethernet cable is connected.

  Yet my laptop marry connects easily.
  I'll start, connect to identify the wireless network and tap on connect, it tries, but says connect with limited access.

  Any ideas plse.

  Hello

  (1) have you activated the WLan card?
  To activate the Wlan you must pass the antenna WLan switch on IT (LED should Flash) and you must use the FN + F8 key.

  (2) did you check the WLan configuration?
  -SID, right encryption settings, good filtering by MAC address, good TCP/IP settings on the right

  (3) have you tried to update the driver WLan?

  (4) don't you update the BIOS?

  If this is not the case, check this box!

• Satellite U205 will not connect to internet

  I think it must e a DNS problem?
  What are my DNS settings? I put it to automatically set the DNS.
  I can run Skype without problem so I know that the wireless router works.

  I have also 2 other computers work fine on the rounter wireless and access to the Internet.
  When I try to Ping www.google.com on the Toshiba I get a negative response, so I can't Ping any URL.
  I ran a diagnostic and received the response below.

  My wireless router is 192.168.15.1 and my ISP router is 192.168.1.1.

  Can someone help me. PLEASE, I BEG YOU!

  The machine information
  Seller: TOSHIBA
  Machine Name: Satellite U205
  Version: Version 1.10 BIOS
  OS: Microsoft Windows XP Professional
  OS SP:Service Pack 3

  Back to top
  IP information
  ipconfig/all
  Windows IP configuration
  Name of the host...: SHARONSNEW
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
  State of the media...: Media disconnected
  ... Description: Intel(r) PRO/100 VE Network Connection
  Physical address.... : 00-0E-7B-D9-50-E6
  Ethernet wireless network connection card:
  The connection-specific DNS suffix. :
  ... Description: Intel(r) PRO/Wireless 3945ABG Network Connection
  Physical address.... : 00-13-02-82-BE-C5
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.15.103
  ... Subnet mask: 255.255.255.0.
  IP address: fe80::213:2ff:fe82:bec5 5%
  ... Default gateway. : 192.168.15.1.
  DHCP server...: 192.168.15.1.
  DNS servers...: 192.168.1.1.

  Card tunnel Teredo Tunneling Pseudo-Interface:
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : FF-FF-FF-FF-FF-FF-FF-FF
  DHCP active...: No.
  IP address: fe80::ffff:ffff:fffd 6%
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled
  Card tunnel Automatic Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description:. Automatic Tunneling Pseudo-Interface
  Physical address.... : C0-A8-0F-67
  DHCP active...: No.
  ... The IP address: fe80::5efe:192.168.15.103%2
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Back to top
  The protocol information
  Protocol binding information

  Microsoft TCP/IP version 6
  Intel(r) PRO/100 VE Network Connection
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Map Microsoft Tun Miniport

  Protocol of the AEGIS (IEEE 802. 1 x) v3.4.9.0
  Intel (r) PRO/Wireless 3945ABG Network Connection
  WLAN transport
  Intel (r) PRO/Wireless 3945ABG Network Connection

  WLAN transport
  Intel (r) PRO/Wireless 3945ABG Network Connection

  TOSHIBA Network Device Usermode i/o Protocol
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Intel(r) PRO/100 VE Network Connection

  Point to Point Protocol Over Ethernet
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Intel(r) PRO/100 VE Network Connection

  Point to Point Tunneling Protocol

  Layer 2 Tunneling Protocol

  Remote Access NDIS WAN driver
  Direct parallel
  Miniport WAN (PPPOE)
  Miniport Wan WAN (PPTP)
  Miniport Wan WAN (L2TP)
  RAS asynchronous card

  NDIS usermode i/o Protocol
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Intel(r) PRO/100 VE Network Connection

  TCP/IP protocol oriented messages (SMB session)

  WINS Client (TCP/IP) Protocol
  Microsoft TCP/IP version 6
  Intel(r) PRO/100 VE Network Connection
  Microsoft TCP/IP version 6
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Microsoft TCP/IP version 6
  Map Microsoft Tun Miniport
  Internet (TCP/IP) Protocol
  Network adapter 1394
  Internet (TCP/IP) Protocol
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Internet (TCP/IP) Protocol
  Intel(r) PRO/100 VE Network Connection
  Internet (TCP/IP) Protocol
  Miniport Wan (IP)

  Internet (TCP/IP) Protocol
  Network adapter 1394
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Intel(r) PRO/100 VE Network Connection
  Miniport Wan (IP)
  Back to top
  Information about the network device
  Intel (r) PRO/Wireless 3945ABG Network Connection
  Device ID: PCI VEN_8086 & DEV_4222 & SUBSYS_10408086 & REV_02\4 & 3E7C1 280 & 0 & 00E2
  Status: activate
  Vender Driver: Intel
  Driver version: 12.0.0.73
  Driver date: 27/04/2008

  Intel(r) PRO/100 VE Network Connection
  Device ID: PCI VEN_8086 & DEV_1092 & SUBSYS_00011179 & REV_02\4 & 6D5B 6 b 1 & 0 & 40F0
  Status: activate
  Vender Driver: Intel
  Driver version: 8.0.21.101
  Driver date: 10/10/2005

  Back to top
  Status of communication switch and wireless wireless keyboard shortcut
  Wireless Communication switch: on
  Shortened wireless keyboard (Fn + F8)
  Wireless LAN: on
  Bluetooth: Off

  Back to top
  Diagnostic results
  Ping option: on
  Ping check: Yes
  Ping Retry: 3 (times)
  Ping Time: Out 300 (ms)

  < network="" adapter="">>
  Description network adapter: Intel (r) PRO/Wireless 3945ABG Network Connection
  Status: activate
  Mac address: 00-13-02-82-be-c5
  IP address: 192.168.15.103
  < ping="" status="" list="">
  Default gateway:
  192.168.15.1 [OK]
  DNS server:
  192.168.1.1 [OK]
  WINS server:
  Parameters: no
  Proxy server:
  Parameters: Do not use

  < network="" adapter="">>
  Description network adapter: Intel (r) PRO/100 VE Network Connection
  Status: activate
  Cable LAN status: disconnected

  Back to top
  ConfigFree Version
  ConfigFree (TM) 5.90.05
  Database 3.00.02

  Back to top
  Network Diagnostics
  No problem found

  Hello

  You have posted a lot of info that confuse finally
  Generally, the router must manage a pool of IP addresses, the IP addresses should be assigned automatically to each laptop computer that tries to connect to the router.
  So in your router settings dynamically assign addresses IP must be activated.

  In addition, you should check if the MAC address filtering was not activated because this could cause the laptop to connect.

  The WLan connection properties contain the TCP/IP protocol. The TCP/IP protocol contains a few options. Here, you must make sure that all (IP address, gateway, DNS) is set to obtain automatically.

• Satellite L500 will not start

  So today, I decided to restart my computer because it was a little slow.

  Now, the computer laptop everything wont start even upward. In the picture that is happening, then it brings me to the boot menu.
  I try every option to boot, but it brings me right back to the start menu.

  When I try to recover the system, the screen goes black after it says "Windows is loading files".
  I did not do anything for her in the last 24 hours.

  What it looks like when I boot.
  http://i.imgur.com/7bHA0h3.jpg

  Pictured his visible that the laptop is trying to boot from the HARD drive. But obviously this procedure fails.
  So I guess the HARD internal disk does not work correctly
  Probably previous slowdowns related to HARD disk problems.

  Try to start with a Linux Live CD or another disk (WinPE) bootable system
  This Live CD don't install anything on the HARD drive and generally even if the HARD drive is faulty, the laptop could be started.

  Finally, I think that you will need to replace the HARD drive in order to reinstall the system.

• iPad 2 Mini will not connect WiFi

  I was able to surf the web on my iPad Mini 2 retina always. When I woke up this morning, it didn't connect to the WiFi. He said that the entered password is incorrect. I know it's okay, because I checked several times and my MacBook works on the same network. I even connected my Android on this WiFi Phone and it worked.

  Here's what I've tried so far:

  • Reset network settings
  • Restart the router
  • My iPad is restarted

  Nothing did.

  I already checked If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple support network and other topics that I could find on this forum. I don't want to reset my iPad to factory settings. What I'm supposed to do? Why is it all suddenly say it is incorrect? I used the same WiFi router for years on my iPad since I bought it.

  Hello, try to change the Protocol described in this thread wifi incorrect password after update iOS 8

• New Satellite L500 will not start

  Hello
  My Christmas gift to my son Watch Windows begins to load files and open, then an error message if poster indicating an error has occurred

  Error: F3-F100-0005
  Please press OK to turn off the computer.

  Someone at - he of the clues as to how we can make it work?

  Thank you
  Lancius

  Hello

  I have no idea why this error message, but it is recommended to reinstall Windows, and configure the system again.

  You must use the option of HARD drive recovery!
  For this power to the top of the unit and press F8
  Then new menu should appear where you must choose the option to fix my computer.
  After that choose recovery option of HARD disk which allows you to reinstall Windows again.
  Complete the configuration and the test booklet.

  Good luck

• I've restored my Windows 7 laptop to factory State. Now it will not connect to Windows update.

  I used the function to «return to the image of factoy»  Updated the drivers of HP.  Click on Windows Update & he wanted updates for the last 30 hours.  Any thoughts?

  HP Pavilion Notebook PC g6

  SN 5CG2190FP0

  PN B7S85UA #ABA

  500 GB

  4 GB OF RAM

  Start by following the instructions in this discussion:

  Windows Update problems?  First read this.

• My Toshiba Satellite will NOT connect to the WiFi in my house of employers, but connects everywhere else I will!

  My Toshiba Satellite WILL NOT connect to WiFi in my house of employers, but connects everywhere else I go; I have Windows XP Home Edition SP3, and there a router Linksys WRT16ON. My network card is an Atheros AR5001X + Wireless Network Adapter (and says "this device is working properly". I tried disabling, entering all information, penetrates is not in the news was unchecking the "Enable IEEE 802. 1 x authentication"(and whenever I go in there, he checked again) changed on 'Open' and 'AES' TKIP, WPA (which is) and the password is correct, restart the router, moved the laptop around (the router was in my room, now it is in the thnxt room and it Me REPEAT JUST : 'Validation of identity' and 'impossible to find a certificate to connect to the network'.) I can connect with ethernet, but not with this new situation of the House, do I have the wireless. WHAT ME MISS? I did this for weeks and even now, it says I'm connected, the signal strength is very good, often great, but Explorer cannot display this webpage. Can someone tell me what to do? Thank you!  Allie

  Your old Toshiba equipped with an adapter wireless which is likely to be used for Wireless-a, b, wireless and wireless-g (the project).   Your employer has a newer version (not the last and larger, but much more recent than your equipment) router Linksys that is capable of wireless-b, wireless-g and wireless - n.

  Your most likely problem is that your employer has set up his router to "N-only.  Wireless n uses the same radio frequency as wireless-g (this is why detect you the "excellent" signal strength), but uses a different protocol (this is why you can't connect).

  Politely ask your employer to change the mode 'network' from the back of the default router of "mixed".

  The router manual is here: http://homesupport.cisco.com/en-us/support/routers/WRT160N see p. 13 ' Basic Wireless Settings.

  Looking for a certificate message was probably bound to have the box 802.11 x checked.  This box should NOT be checked for home wireless networks.

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.