Satellite L505-10V - using HDMI is no pic on external monitor

Similar Questions

• It is not recognized on Toshiba Satellite L505-10V support site

  Hello

  Two months ago I bought the Toshiba Satellite L505-10V, but my laptop can t be recognized on the Toshiba support site.
  Product PSLS3E-01Q014Y4 number. Does anyone have similar problem?

  Thanks in advance!

  Concerning

  Its an

  Hello

  Maybe the auto detection doesn t work properly on each laptop

  If you want to search for drivers & downloads I would recommend research yourself. So follow this:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Now you can search for your laptop and you will find the drivers if you need! ;)

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• Can satellite L750 - I use a stand alone TFT as primary monitor?

  My father has a laptop Toshiba Satellite L750 - 22 c and want to connect it to a larger TFT screen. Would this be possible? And if so what resolution this Toshiba reaches?

  I m hoping to connect it to a 24 "TFT with a resolution of 1920 x 1200.

  Take care
  / M

  Hello

  I confused m.
  Want to connect external monitor?
  Of course, this should be possible.

  Have you read the manual provided with the laptop?

  The laptop supports RGB (VGA) and HDMI port. So where is the problem?

• Satellite L50 - B - 1 p 1 connection to an external monitor

  I just bought a satellite P L50-B-1 1. When I tried the port RGB (VGA) to connect to an external monitor, the screen of the laptop freezes, the mouse freezes and the monitor does not display the image. I followed the instructions on how to connect the 2 together and selected everything including extended. I have tested the monitor with another laptop and the monitor works perfectly.

  Not something I'd expect from a new laptop.

  Can someone help me please?
  Thank you

  Robin

  Hello

  Are you using the original pre-installed OS that you got with your machine?
  I m was really asking something like that to happen. Try to turn off your device. Connect the RGB cable and turn it on again.
  Do you use the F4 key to switch between internal and external?

  Did you test using the HDMI port? If so, post it please the results. It will be interesting to know if the same problem occurs again.

• Satellite Pro L550 - cannot get 1920 x 1200 on external monitor

  Hi all

  I can't get nativ resolution (1920 x 1200) to my external monitor via HDMI conection.
  Catalyst or monitor settings in windows XP gives max res only 1920 x 1080 - why?

  NB Satellite pro L550 (ATI 5165, hdmi), LG L245WP (hdmi). Thanks for the reply.

  Hello

  Cable HDMI and the port, would support the resolution 1920 x 1200, but the fact is that if the graphics card or the graphics driver doesn t card supports this resolution, then you won't be able to choose and use.

  In your case I would look in the user manual and check if the graphics card would support this resolution. If the graphic card supports the problem could be related to the graphics card driver that does not contain this resolution.

  Greetings

• Satellite Pro S300 - cannot extend the desktop to an external monitor

  Hello
  I have a Satellite Pro S300 and it won't extend the desktop to an external monitor / projector, but it will clone the desktop?

  so far I have tried:
  2 instructors and 1 projector all do the same thing, will clone but not extend.
  Reinstall the latest drivers to display on the Toshiba site.
  Reinstall the latest drivers of change on the Toshiba site.

  But nothing worked, I even checked my S300 colleagues to make sure that I use the same parameters and their (of 2 other s300) extend and clone office.

  Has anyone seen this before and how solve you the problem?

  Paul

  Did you first remove the old driver before you install the new driver? If this is not the case, try to reinstall the driver again. Therefore, to remove the old driver, restart the computer, use CCleaner to clean the registry and install the new version you can find on the Toshiba site.

  More I would try updating the BIOS. You can find it on the Toshiba site too.

  I hope it works for you.

• Satellite Pro L360-14F - cannot play videos on the external monitor

  Toshiba Satellite Pro L360-14F
  Video files as avi, flv, mp4 are played with SM-player etc on the screen of the laptop, but not on the external monitor attached.
  A newspaper there is the error message: MPlayer crashed by the bath OF CPU/FPU/RAM usage.

  Which may mean that?

  You already go to the external display by using the FN + F5 keys?
  To do this.

  In addition, you must go first to the external screen and then you need to start the windows media player or other video player.

  I advise to use the VLC Player. It s free fro and plays most of the files

• Need to connect by Satellite U945-S4110 to the VGA-IN of the external monitor port

  I need to configure my laptop Toshiba U945-S4110 to be connected to the VGA input of a display screen.
  What do I need?

  Is this enough for this HDMI to VGA Converter active

  http://www.Amazon.com/1080p-female-video-converter-adapter/DP/B008279OJ6/ref=sr_1_4?s=electronics&ie=UTF8&QID=1392112034&SR = 1-4 & keywords = hdmi + in + vga + adapter

  then a VGA - VGA cable

  > What do I need?

  Well, the phone supports only the output HDMI port. This port sends the signal video and audio digital.

  In the case where your external monitor supports only RGB (VGA) port, you will need to use some sort of adapter/converter, which would be able to convert the digital signal HDMI to VGA analog signal.

  I put t know if the adapter might work, but you will not get sound because VGA does not support audio, only video signal.

• Satellite U300-it is possible to set up my external monitor at 1440 x 900?

  I have a big problem with my Satellite U300 - 13H. I need to set up my external monitor broad (Compaq wf1907v) at 1440 x 900.
  I downloaded the latest drivers from the Intel website, but when I tried to install it, I got this message "* the driver being installed is not validated for this computer." Please get suitable driver from the computer manufacturer.

  Thanks for your help.

  > The driver being installed is not validated for this computer. Download the correct driver, the computer manufacturer please. "This means that you must use the graphics driver from the Toshiba driver page.

  Why? Because graphics drivers of 3 third-party sites are not designed and certified for Toshiba laptops.
  The drivers of Toshiba GPU support thermal protection which is needed to prevent overheating of the material.
  The drivers of Intel, ATi or nVidia page don t support this protection!

  You can use and install these drivers ONLY at you OWN Risk!

  By the way; You can choose the resolution 1440 x 900, only if the graphics driver supports this.

• Satellite 210CS - the screen stays black (even to an external monitor)

  Dear Toshiba Forum members and guests.

  Several months ago, I found an old laptop. When I turn it on, the screen remains black. And when I connect an external monitor to the laptop via the VGA input, two screens are black. I used a flashlight, pulled on the LCD screen of the laptop, but I don't see all the details on the screen.

  I thought it was because of the empty RAM slots. This week, I bought a RAM-unit and installed.
  I tried to start the laptop again, but nothing on the two screens (even though I used a flashlight).
  I searched the Internet for certain solutions, but nothing works. I also tried updating the BIOS, found on the Web from Toshiba site.

  Some information on the laptop:
  Toshiba Satellite 210CS/1.3
  PA1230E
  48 MB RAM
  1.3 GB HARD DRIVE

  Date of manufacture: 4 ^ th ^ October 1997

  If you want more information or you would like more information, please put a comment in this thread.

  I hope someone can help me solve this problem.

  Thanks in advance.

  I think there must be some serious hardware problem.
  I don't think that someone will be able to tell what part exactly failures because it could be any inner part.
  You buy the RAMs again. Well, in this case, we can exclude RAM problem, but there is probably a motherboard, CPU or a graphics card problem.

  From my point of view of the few you don't have many options: perhaps you could found some other good treatments Satellite 210CS somewhere in the internet since it is not very easy to get parts for this oldie

• Satellite L755D: black screen after startup or switching of external monitor

  I have a strange problem with my Satellite L755D. I normally use an external monitor that works very well.

  If I want to switch to the laptops monitor using Fn + F5, the laptop monitor remains dark, but you can see (more guessing) office.

  Just the bright background lights. Same thing if I boot without the external monitor. In the beginning (phase BIOS?), you can see the normal symbols, then the screen turns to.

  Funny, is that these two problems do not appear when I cut the power supply and the laptop runs on battery only.
  Any ideas, what the reason could be?

  Thank you
  Mason

  Funny, is that these two problems do not appear when I cut the power supply and the laptop runs on battery only.

  Maybe you should check the configuration of power plan that is used only in battery mode.
  It might be possible that the backlight settings have been set at a lower value by using the power of the battery.
  I recommend you to check this in the ATI catalyst and windows power options.

• Satellite M30-104 - cannot set a good resolution on external monitor

  Hello world

  I have a Satellite M30-104 with a nvidia GeForce FX5200.
  This works well but when I plug in an external monitor, which is a widescreen 1440 * 900, I can not put the correct resolution, even if I install the latest driver.

  What can I do?

  Thank you

  Hello

  First of all you must check in your manual if your graphics card would support such a resolution external.

  But note; you will not be able to select this resolution if the graphics driver doesn t contains, although this resolution would be supported by the graphics card.

  As you can see two facts are important: driver graphics and graphics card can support this resolution if you want to use.

  Welcome them

• Satellite Pro U300: DVD issue - error: cannot output to external monitor

  Hello

  I had problems to play a dvd on my U300.
  Basically, the software would load but when I tried to play the dvd it says "can't output to external monitor.

  After exploring all the options I found nothing to stop what is happening. Then, I downloaded the latest version of the software for the toshiba site.

  dvdpl - 20070807102909.zip

  I resintalled this, but got the same error message.

  I uninstalled the software, then tried to reinstall, but it now produces just a mesaage error saying: he can't intsaller software on this computer.

  How can I reinstall it?

  Kind regards

  Mark

  I think you should check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=107781𚔅

  Jayjay has already provided a link to the Toshiba useful doc.

• Satellite A50: How to use a 1440 x 900 on external monitor?

  I have connected a 1440 x 900 LCD monitor to my satellite A50. Unfortunately the graphics card does not support this wide screen resolution.

  I tried to download the latest driver for the card intel 82852/82855 chart to:
  http://downloadfinder.Intel.com/scripts-DF-external/Detail_Desc.aspx?AGR=N&ProductID=922&DwnldID=10099 & strOSs = 45 & OSFullName = Windows * 20XP % 20Home %
  20Special & lang = eng. But it was not possible to perform the installation. Some messages can not install... Contact your service provider.

  I found in a forum: http://forums.computers.toshiba-europe.com/forums/search! execute.jspa? dateRange = last90days & objID = & q = 1440 x 900.
  someone with the same problem, but het had a satellite A120.
  Accourding to this thread it is posible by changing some .inf files?

  Can I do the same thing with my laptop?

  Hi Raimond

  Thank you very much for the feedback solution and unposted. This is very useful information and I hope that your ad will help other users with the same problem.

  Good luck!