Satellite L505 - screen flashing, but another screen works

Similar Questions

• Satellite L505-144 - flash memory transfer speed is very slow 1.45 Mbps

  Hello

  I have a Satellite L505-144 and installed the system Win 7 64-bit *.
  The problem is when I move or copy DATA using Flash memory, transfer speed is very slow 1.45 MB/second and I try the same memory Flash on another PC its work too quickly it move 22 MB per second

  What is the problem?

  Hello

  What is the status of the SATA mode in the BIOS?
  It must be set to AHCI.
  If it s set to compatible, then the SATA benefits can not be used
  Check it!

• Recording of electric guitar on Satellite L505 - 10 X - but not Line-in

  Hi all

  I have a laptop Satellite L505 - 10 X. I play an electric guitar through a multi-effects pedal (Zoom 606, which can produce directly to the helmet without amplification more far away) and want to record directly to my laptop.

  I used to be able to do that on my old laptop Fujitsu-Siemens, because he had a Line-In Jack, but my Satellite does not work.
  Would it not safe to use the jack Microphone on my Satellite to do the same?

  Thank you

  Samgoody.

  Hi mate,

  I checked the Satellite L505 manual and founded the following interesting information about the microphone jack:
  + A 3.5 mm mini jack microphone allows you to connect a mini-jack 3 drivers for input monophonic microphone and connect a stereo device for audio input. +

  If that sounds like it should possible to record the sound of your guitar.
  Check this box!

• Satellite A100 PSAANE - Flash card no longer works

  Hi all

  I have the following problem. Sometimes when I start my laptop I get the following message.
  Toshiba flash Cards has stopped working and I can't do anything else but to restart my laptop.

  Can someone help me solve this problem cause it gets very boring!

  Thank you
  Nadia

  I agree with Akuma. Remove value added package and install latest pre-installed support Toshiba and download page - http://eu.computers.toshiba-europe.com > support & downloads.

• Satellite A100 display empty but external vga works

  Hello
  my two-year old Satellite A100-847 screen has stopped working. I used the external VGA monitor for a few days,
  and then switched back to laptop computer LCD and discovered that it doesn't work. It shows nothing, only the gray backlight.
  The LCD does not work even at start-up in WIN XP, or AC or battery power. I tried to disassemble the screen according to some guide
  to check if the cable is firmly in his place in connection to the LCD, but it has not solved the problem.
  I use the original BIOS and the somewhat updated nvidia display driver, it worked fine until now, so I suggest this isn't a driver/bios problem.
  (but maybe that is it, so I tried to install the original display with no effect driver.) I don't want to try to Flash the new bios and meet up with Kiss to the top view and bios too)
  Video output for external monitor is quite well, start-up or in the victory.

  Everyone sees a solution, please? Or should I just go to the service provider...
  Thank you
  Pepe

  I think that it s a hardware problem of the display or the FL-inverter.
  The FL inverter is part hidden somewhere close to the screen.
  It controls the backlight of the display.

  So you should go to an ASP, they can order the parts and exchange it or looking to ebay for a complete display and Exchange yourself.

• New battery for Satellite A40-S270 loads but does not work

  My Satellite A40-S270 battery (PA3287U-1BRS) is 4 years old and doesn't work for 2 hours, so I bought a new.
  From 2 different companies, they provide a PS2522U, 11.1V 8800 mAH, which is supposed to be compatible 100%.

  Fees from the battery to 100%, then when I pull the AC it closes... becomes black.
  It does NOT start on battery only. The green light flashes when I push the Start button, but that's all.

  I can put the old battery to charge fully, then it will unload fully (2 hours) then load and shoot HQ at any time and it continues to run.

  > My Satellite A40-S270 (PA3287U-1BRS) battery is 4 years old and works only 2 hrs
  The laptop can run with old battery 2 hours?
  Hey Buddy my laptop only tracks 1.50hours by using the battery power and the battery is not old and doesn't malfunction. There is nothing wrong with your old battery in my eyes.

  In addition, you should know that battery life depends on the use of the laptop battery would not last long if the laptop would be used with a maximum performance (using accuracy in car, CPU and CD/DVD display at 100%, etc.)

  Back to your question; I think that your batteries are not entirely compatible.
  You must take the same battery recommended by Toshiba.

• Satellite L505-13D - Fn key does not work

  Hello
  I have some problems in my laptop

  Key Fn - 1 does not work with any service of Toshiba, only with windows keys, this happened after some windows critical updates (win 7 64 bit)
  2. I have not found my cell phone ' number series or in the site Web of Toshiba part number.

  Please can someone help me
  Thank you

  Hello

  The FN keys are controlled by the Support of Flash memory card utility.
  You will need to reinstall this tool.
  But also the VAP (value added package) must be reinstalled.

  I recommend first of all remove the system from the Flash and the PPV card.
  Then restart the device and clean the registry with CCleaner.
  After that, you need to install the two tools VAP and Flash memory card Support utility

  Good bye

• computer will not start at the top. Did just a bit of noise and a bright flash, but nothing else works, not even the monitor

  No Visual on the screen.  The computer does not (noise) to turn on.

  All I can do is repeat my previous tips for you:

  If nothing appears at all, it seems to be a hardware problem.

  If under warranty, contact the manufacturer of your computer.

  If it is not under warranty, contact a local and trusted computer repair shop.

  Good luck with it.

  See you soon.

  Mick Murphy - Microsoft partner

• I have an inspiron which will remain not connected to wireless internet but another computer works perfectly

  I have a Dell inspiration that will remain not connected to the internet wireless, but the other computer

  Are the two computers to the same distance from the router?   How many bars do you plan to connect?  You use without wireless - G or wireless-N?  Try clicking on the bars (next to the lower-right clck) then click on Open network and sharing Center, then click on wireless network connection and see that the number of MB/s is just above the bars in the middle of the right.  You should see something like 54 Mbps and at least 2 or 3 bars.

  Good luck.

• Re: Satellite L505-13W - black screen on the camera built-in

  Guys, pls help me to fix my camera built-in.

  My webcam screen turn to black. don't know why? his work, but I don't see anything...
  I have already installed the driver, there need, but nothings happened. Before that it works well but when I reformat, I do not know now. My unit is Satellite L505-13W and my integrated camera model: USB2.0 UVC webcam...

  Please help me. Thank you!

  Hi val_mactal214,

  Maybe this article can help you:
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

• Satellite L505-13W shows error blue screen

  My error on blue screen shows computer laptop SATELLITE L505-13W.
  The operating system is started and after some time, it shows a blue screen error and restarts.

  Even after repair successful when restarting requested repair, he showed the same error.
  So I tried to recover with the recovery cd, but it turned out to be a tragedy.

  He eraced my complete HDD to stone age and smiled saying recovery is not possible.

  Please help me...

  Hello

  If the laptop can not be recovered using the recovery disc, then it feels the hardware problem.
  Are you sure that your recovery disc is OK?
  Have you tried to install the OS using another installation disc?

  Perhaps it would be useful to check if the problem could be related to defective recovery disk, but if the BSOD (blue screen of death) appeared before the installation of the OS, I would say that the problem can be caused by an internal hardware malfunction

  It would be necessary to check the modules of RAM and HARD drive.
  HARD drive can be verified by using the diagnostic software from disk as Drive Fitness Test (freeware)

  RAM could be checked with a tool like memtest, but you need a system to market, then in this case, you can not check the RAM using a software that I recommend to remove a module and test the laptop using a module in each slot

• Satellite L505 Windows 7 startup error screen

  I had a problem on my Satellite L505 a few weeks ago and it keeps occurring during each startup.
  Windows starts as usual, but instead of loading blue screen, where you can choose username and password to type I get only a black screen with nothing on it.

  I can't see anything, except for the mouse pointer, which works btw.
  When I press ENTER and type my password to Windows load my desktop and everything works well.
  This problem occurs when you start upward only, once I am connected and I want to switch users there is no this problem.

  I get a blue screen with stupid windows 7 graphics and images of all accounts, so there is no problem choose a user.
  Have you seen such a problem? Or is there someone who knows how to fix this?

  Thank you for your response.

  > When I hit ENTER and type my password Windows load my desktop and everything works fine.
  What password do you mean? Maybe you have defined a passoword BIOS?
  The laptop would not boot until the BIOS password has been set and then the operating system should start.

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• Envy Touchsmart M6 Sleekbook screen works but is not lit

  Hey guys. I went to open my laptop yesterday and the power came the keyboard lights but the screen do not have. I was trying to understand if it is a physical problem or a software problem. It turns out that, when I plugged it into another monitor with a HDMI cable, the computer is always on and I can use it. Because it is a touch screen, I tried to use the screen to browse the Internet and it still worked. So, basically, the laptop still works and the screen works (because I can browse the Internet by using a different screen and the touch screen still works), but the screen itself is not lit. This sounds like a software problem or a physical problem? What ideas you guys have to fix? Thank you

  Hello dblack678,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand that your computer screen is not lit. I'll do what I can to help you! To help you properly, I need the following information:

  1 the model number of the computer. If you need help to find this information, please see this site: find the model number of the computer

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. have you installed new hardware on this computer, before the problem appeared?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  However, since it is a new unit, I would just contact HP support. They will resolve the issue quickly, or service or replace this computer. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thank you for choosing the HP Forums. Have a great day!

  Mario

• I can't open links as the screen flashes but does not allow a new intake open. It was very iffy for several weeks, but it happens more and more.

  It started several weeks ago, but now the frequency has increased to where I can't open a link in a new take. The screen flashes, but nothing happens. I've tried Google Chrome, and this problem does not occur in another browser, so I guess this isn't my CPU, or security software. I use Avast and Malware Malbytes. I won't change to Firefox! Help!

  You must do a little more troubleshooting to determine the cause; as explained in this section of this safe mode support page.

  https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode#w_the-problem-does-not-happen-in-safe-mode

  The problem does not occur in Mode safe

  If the problem does not occur in Mode without fail, it is likely due to an acceleration of the extension, theme or material.

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems for solutions.