Satellite L550-11th - Webcam appears as unknown device

Similar Questions

• Satellite Pro L670 - 18F PSK3FE Webcam works become "unknown device".

  The * webcam * on my * Satellite Pro L670 - 18F PSK3FE * who is running * Windows 7 64 - Bit * a well worked until this week. My notifications bar started to say * "unknown USB device" * and when when I went to use the webcam it no longer worked.

  When I disabled the webcam in the BIOS the notification has stopped, but when I turned it on the notification came back again to the top. The unknown device is clearly the webcam.

  I updated my BIOS and tried the system restore.

  I also downloaded the driver for the webcam of http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have tried running that - + but it NEVER seems to complete the installation. + I have will continue to try to reload the driver and see if that helps, but from now on, I do not think that the pilot will help.

  If it is just a driver problem, someone could suggest how to get the driver to install really :-(

  I am now at a loss. I'm not sure what to do now. Suggestions?... + Please! +

  Hello

  Unknown device means that the driver is not installed.
  I think that the installation of the webcam driver should fix it.

  As face recognition also use the webcam, I recommend you to uninstall this tool as well as the older version of the software of the webcam.
  Both (or just face recognition) should appear in Control Panel-> software

  Now download both applications to the driver page.
  Start with the installation of the webcam driver:
  (1) unpack the webcam driver package

  (2) the TC30049700N.exe may also be decompressed (right click-> extract here)

  (3) now you should see different files exe, dll, and others attempt to run setup.exe to start the installation. If this does not work, go to Device Manager, mark (webcam) unknown USB device and install the driver pointing to the folder that contains the files of webcam driver. The system should automatically recover dll files.

  (4) restart the laptop and follow with face recognition software.

  Good luck

• Satellite A200 - Webcam disconnected message 'unknown device '.

  My integrated webcam has stopped working. I downloaded and installed the latest driver available (Chicony 1.7.115.0213) but still does not work the camera. When I run the software assistant camera it tells me that the camera is disconnected. On the other hand, there is a notice from Windows telling me that there is an unknown USB device (Port_ #0001.Hub_ #0002) which I suppose is the camera. I tried Googling the issue or search in this forum but I have no answer. I would be really grateful if anyone can help me find a solution. Just in case, here is my PC details:

  Satellite A200-1DY
  Intel® Core 2 Duo
  Code: PSAE3E-01F00GSP
  Windows Vista Edition Home Premium
  Service Pack 2
  32 bit

  Thanks in advance!

  Victor

  Hello

  > On the other hand there is a notice from Windows telling me that there is an unknown USB device (Port_ #0001.Hub_ #0002) which I suppose is the camera

  Yes, it could be the internal webcam.
  Seems that the driver has not been installed correctly.
  What to say; first remove the old webcam software from the system.
  Then clean the operating system using a tool like CCLeaner, for example.
  After that, go into Device Manager and remove the unknown device.
  Restart the unit.
  Reinstall the webcam software and check if the device has been recognized again.

• Re: Satellite L550-13V - webcam number - yellow stars instead of my image

  Hi all

  I have a toshiba Satellite L550 13V and everything works perfectly for a year and a half now.
  Recently, I wanted to use the webcam via Skype and it did not work.

  In fact, it is the webcam itself that can not pinpoint my face.
  When I see in the Device Manager, it says that the webcam works and the driver is up-to-date.
  I don't know what to do?  :|

  What can be the problem?
  I can't take pictures or shoot a film.
  Instead of my face, there are several yellow stars.

  Thanks for any help

  Hello

  I think its easy to solve.
  Launch the webcam software (all programs-> toshiba)
  Then go to effect settings and check if there is an option called the mosquito net
  Disable this.

  This should help

• Satellite P70 - Has: win 8.1: unknown device ACPI\TOS620A

  Hello

  I installed the Version of Enterprise 8.1 Win on my P70 - A Satellite. All devices in addition to ACPI\TOS620A\2 & DABA3FF & 2 are supported with the right drivers.

  Does anyone know which device is, for example the Bluetooth Driver?
  The Device Manager confirms that I have Bluetooth for Andoid, generic Bluetooth and Microsoft Bluetooth devices.

  I have downloaded bfdp - 20131011113844.zip and run the exe file. I wonder this exe is not shows something like "Installed successfully" or more.

  So I don't really know if Bluetooth is really installed and if Bluetooth is the question.

  Your
  Stephan.

  The ACPI\TOS620A unknown device seems to be related to a Toshiba HDD Protection Utility.
  Visit the page of the Toshiba UE driver and download the HDD Protection Utility released for Windows 8.1

  Your problem should be solved

  Welcome them

• Satellite X 200 - 21 d - two unknown devices after installing Vista 64 bit

  I just newly installed (my Vista 64-bit), my laptop 21(d) and noticed that in Device Manager, there is option - hidden features, then 2 new unknown devices appear.
  What are these devices and where to find the right driver for it?

  Hi there is green Orchid,

  Is the vista 64-bit, that you have installed the software that came with the system or a version of windows?

  Before installing vista, have you checked if there are external devices connected to the system?

  Post edited by: iSkO

• Satellite L550 - 11K webcam Info

  Hello!

  I want to know the resolution of the webcam integrated mobile satellite L550 - 11 k and the webcam on the new L555 laptops.
  It is 0.3 or 1.3 megapixels?
  Someone at - he experiments with the help of Skype with this webcams?

  According to the specifications of the Satellite L550 laptop - 11 k to 0.3 M Pixcel camera.
  Satellite L555-10N has the same 0.3 M Pixcel camera.

  On my Satellite I 1,3 M Pixel camera and cannot say how it looks with 0.3 M camera, but I think it should be OK for video conferencing.

• found new hardware wizard appears and unknown device device Watch Manager

  Since a few days ago, the Add New Hardware Wizard keeps popping up. I looked in Device Manager and found an unknown device (yellow exclamation mark) should I delete the device? I don't know what to do to identify which device is unknown.

  If you remove it, then he'll probably be back the next time that you start.

  go to start / all programs/windows update (at the top of the list of the menu), custom search, watch your optional hardware updates and search for a driver that you have not already installed, you can get lucky. Otherwise post the details of your specifications and ask again.

  Furthermore, it can take a while to get the pages updated and you may need to install active x on the way, a line will appear at the bottom of the fixed part of your browser screen (the same as when you download) If this is the case, click on it and install active x, then a box should appear and tell you allow I think.

• Satellite C850 and Win7 32-bit - unknown device

  Hey everybody,

  I have re installed windows 7 32-bit in my C850-A670, part of the Staellite not. PSKC8V. There is an unknown device with Hardware Ids:

  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004 & SID_FB 311179
  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004
  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31

  Please hep me find identify the driver for this device.

  Thanking you in anticipation.

  Concerning

  Post edited by: aleempk

  Hello

  You can identify the unknown device if you use the http://www.pcidatabase.com/index.php page.
  8086 research provider > Intel
  Research of device 1E31 > USB 3.0

  Try please install the driver USB of your computer. You can find it here.
  Check it out and post comments.

• CD/DVD/BluRay drive will appear under unknown device

  The driver seems if be installed properly, yet it shows in the 'Unknown' category in Device Manager.  I can burn discs and play discs if I run the program as administrator, but it says that "access is denied." if I try to use the drive without specifying a run as administrator.  Screenshots can be provided if it would be of any help.

  Hi WarrenTC3,

  1 when was the last time it was working fine?

  If Device Manager cannot identify the device, it will label it an unknown device.

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it.

  First, check what is the code for error on an unknown device in Device Manager.

  (a) open the Device Manager , look for the unknown device.

  (b) make a right click on the device and click on Properties, search now on the tab general to find the error code.

  See the link below and run the patch available and check if this solves the problem.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If the previous step fails, and then run the fix tool below and check out them.

  If the below fix tool does not resolve the issue then you must try the steps manual, mentioned in the following Microsoft article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A300 PSAG4A: Webcam not detected in Device Manager

  I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
  The webcam is not working and it is not detected in Device Manager.
  When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

  The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
  However, I hope that this is a setting that I can fix myself.

  I had restored the laptop to factory also and I've updated the bios.
  I tried to uninstall all the USB controllers and reboot the PC.

  Is there something I can do?
  It's maybe a software problem?
  There may be a setting?

  Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

  So if cam still doesn't work properly, I fear that there is a problem with the hardware.
  It cannot be matter of software because the recovery image contains the driver for the cam.

• Satellite A350 - FM tuner appears in the Device Manager?

  I have a FM tuner device, but I don't see that he listed in Device Manager. I checked hidden devices and it does not always show.

  How to see it in the list of drivers in the driver manager? (Why she get hidden well?)

  Where this device get its drivers or is it without a driver and only works with the tuner NXP software and the antenna

  Thanks for any help on this

  Hello perfection,

  Do you mean a FM tuner Satellite A350 internal or external one?
  As far as I know the Satellite A350 doesn t have FM tuner

  If you have an external FM tuner have you installed the driver for it? If so it should be listed in the device if Manager she s connected to the laptop.

• under vista and cannot detect cam sex. Webcam appears in the device under usb Manager, but under imaging devices and sound happens with one! and said that the drivers are not installed.

  When I try to install the drivers under sound and also imaging devices he returned with access denied and the code 28 error and said that the drivers for this device are not installed.

  Hello cal26,

  Have you tried to visit the website of your computer manufacturer to see if a driver/software update is available for your computer? Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Satellite U500-115 - unknown devices after the Installation of Win XP

  Hello

  I just installed Windows XP on a Satellite U500 - 115 (PSU5EE) and cannot get rid of several unknown devices in Device Manager.

  Before to install the operating system, I changed settings AHCI in the BIOS to Compatibility-Mode (IDE), so I don't need to inject the SATA driver during installation.

  These are the unknown devices:

  ACPI\PNP0C32\1 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\2 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\3 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\4 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\TOS6205\2 & DABA3FF & 0 (location: System compatible ACPI Microsoft)

  Of course, I installed driver chipset and graphics driver from the toshiba download page, but the unknown devices are still there! Can you please tell me what kind of driver I need to install ACPI devices - and get rid of these unknown devices?

  Thanks in advance,
  Hans

  Hello

  In my opinion the unknown devices belongs to the SATA interface controller and these appear as unknown device because you have installed the XP compatible mode.

  Try to install the Intel Storage Manager driver.

  ACPI\TOS6205 device can be a Bluetooth device.
  You must install the battery Bluetooth to get rid of unknown device.

  welcome them

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.