Satellite L650 - Shut down but power stays on

Similar Questions

• Cannot convert a virtual machine while it is powere on or suspended. Shut down and power off the virtual machine before the conversion.

  Hi all

  I am currently using preinstalled VMware 7.1 and I try to import a virtual machine, I used to work on my windows XP. Recently, I am using windows VISTA and I am trying to import my VM (.vmx) and I get this error "cannot convert a virtual machine, although it is powere on or suspended. "Shut down and power off the virtual machine before the conversion.

  This virtual machine worked very well under windows XP and VMware 6.5, but now I am not able to import it. Please suggest how I can make this virtual machine running in my VISTA and vmware 7.1.

  I am also attaching the converter file logs and .vmx vmware.

  Thank you...

  Is there a problem with this backup?

  It is possible. How big is she?

  Right-click on the vmdk file in Solution Explorer, then select «Map virtual disk...» "Does it work?

  André

• Satellite A30 shuts down / blocks

  Hello
  I have a Toshiba Satellite A30 for about 2 years with no problems. Until today...

  I was chatting on MSN Messenger, but had to put my missing status and left the computer for about an hour.

  When I came back to it, the screen was all what it was when I left, but there was no control of the mouse, no whirring HARD drive away, not nothing. In fact, it seemed that he had closed the partitally without turning off the screen.

  The only way I could reboot had to turn off the power. I disconnected the battery, reconnected everything and tried to reload. I don't even have as much as Logo of Toshiba screen, click on the HARD drive, * which is normal for this machine * and off.

  I thought that maybe it was an overheating issue, then I left for half an hour and go home. This time it restarts, but the display was all out of sync. was on 800 x 600 when its usually on the following resolution. (Don't remember who he is). I ran dxdiag and he told me that there is no present display driver, as I had reloaded using the last well known record. It was not a problem, I reinstalled drivers, restarted without any problem.

  Everything was fine for 2 h with the laptop, so at this point, I don't think it was a heat issue. I went through the net, when hung just computer still once, I lost all control of the mouse, even if the optical lights on it were always activate when moved, and he seemed to stop again.

  Well, I left for 10 minutes, he came back and tried again, it started ok, but as soon as I tried to access anything, he hung up again, forcing me to press the power button to shut down.

  Sorry for the lengthy post, but can anyone shed light on this point, I use my laptop on a daily basis, and there are things about it, as I need to access.

  I hope someone can help

  Thank you

  Fruitini

  Hello

  It is very interesting because it can happen to anyone. I really put t know which can block the laptop. On this way, we can only speculate and it is really not easy to say why this happens to concrete.

  I put t know how is your unit configured and that these (process) applications run in the background, but you can try to stop all the unnecessary stuff and see what is happening in this case. Check the Device Manager and make sure that everything is properly recognized. After that create a system restore point and in this way you can restore the system to an earlier time if something goes wrong.

  If you do not find what happens I recommend you back up the data and do the recovery procedure. On this way the unit will be own pre-installed and things like this can happen. As you know sometimes happen oddities and there is no logical explanation.

  Good luck!

• USB ports have power when the PC is shut down. Power supply connected to the battery.

  PC is HP G62 - 222us W7 64-bit.  When the PC was first powered, they gave me the option to allow USB ports ON or OFF after his stop. I chose IT, but now I want ports USB OFF after his stop.  I can't remember have this option is found. Any help would be great.   Thanks in advance for your help...

  I found my answer: Control Panel Goto (W7), search for 'power', click "Change the Power settings", click on "USB settings", click on "USB selective suspend parameters", for the battery, select "Disable", except change, click OK.

  Now, all USB PORTS are INACTIVE when the PC is shut DOWN.

• Updates the window appear when shutting down, but do not set up the next time you start

  The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

  Hi BonnieDoon,

  1. did you of recent changes on the computer?

  2. you receive error message during the update by installing the process?

  Method 1

  See the Microsoft article below as well as try the steps mentioned and check if it works.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 2

  Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP G60 laptop - monitor goes black but power stays on

  When I press the power button, lights up the laptop, I can connect to windows, but then the screen goes black after a few minutes or as soon as possible.

  -The power stays on and does not turn off or restart

  -I can hear the fan spins again

  -I see very very very vaguely the screen that I should be seeing, but no mouse or cursor

  -J' tried to take out the battery

  Anyone know what I can do?

  Thank you, Julie

  If you can see the desktop very weakly, then I guess the backlight is dead/dying

  Edit: view, works does not for any reason any

• printer does not print. Try turning it off. 2 days said "Shutting Down" but does not work.

  Printer is an all-in-one Photosmart C7280

  Windows 7 operating system

  "Shutting Down" message on the screen

  Any changes made to the system before the problem occurred

  Printer does not stop. Manual says not to unpug so that the printer is turned on.

  Where do you go from here?

  The warning against unplugging while the appliance is in use is for "normal".  In this case, you will need to do.

• Satellite A30 shuts down suddenly

  Toshiba Satellite A30-504, connected to the power adapter and with fully charged battery, turns off suddenly while I was reading something on the internet. I tried to turn it on, but she did not respond, and I thought that his mother might have broken down. As by chance, I saw the battery light flashes red for a few seconds, I took the battery of the laptop and left just with the AC adapter. It's on!

  When I put the battery, it turn on, but the battery was suddenly + blank +!

  He accused now and everything is working well, the laptop runs without the adapter sector is plugged in, but can someone tell me what is the thing that's happened? The problem is perhaps not in the battery but in something else? I don't think it was overheated because it came on after I took out the battery and I continued to work for hours after the incident... Thank you.

  > He accused now and everything is working well, the laptop runs without the adapter sector is plugged in, but can someone tell me what is the thing that's happened. The problem is perhaps not in the battery but in something else?

  I think that no one will be able to tell why this happened. Maybe there is a problem of short with electronic power supply to the Board of directors who knows I think that only a technician of the laptop could provide a response after the laptop has been verified.

  But the most important is that your laptop works fine now.

• Satellite P10 shuts down unexpectedly after only 4/5 minutes to be turned on

  Hey, I have a problem with my Satellite P10 2.5 years.
  The problem is it turns off unexpectedly after 4/5 minutes being powered on.

  After he fires it on again for about 7 to 10 HOURS, even with the power drive inside displays the 4 lights on the front, but it will not even power the start-up routine.

  I tried different combinations of power/battery and I still get the same problem.
  I'm sure that it is overheating and then take hours to enhance down.

  Your opinion on this would be appreciated.

  Thanks in advance...

  Ben

  Hi Ben,

  Certainly, it sounds like an overheating issue from your description, although I expect to recover much faster than 7 to 10 hours. You can try the technique of aspiration of dust on the grids of aspiration air to see if it improves the situation. Also check that the fans are working properly and that there is sufficient space around the appliance when it is in use.

  Kind regards

• Re: Satellite A200 - shuts down for no reason

  I was walking where post and for a long time, allows to get help. My laptop Toshiba Satellite A200, 3.5 years
  * Problem: *.
  Previously, its used to stop by itself in the middle of the applications without any warning, the station used to be /: screen stops, no input from the keyboard or the touchpad, but the headlights before that mean the laptop is 'ON' remained * then I used to restart and thought it was a prob. OS or a problem of battery/charger (replaced both but not difference) and then this thing began to be more frequent and now the day has come, it won't switch.

  Current scenario: *.
  When I turn it on with the battery (without charger), turns on, screen lights up, it starts, power normal and at that time there if I plug into any compatible charger (I tried a bit), he died (the same way as mentioned in the "BOLD" letters above). If I restart or launch it otherwise while the charger is plugged in, it does not start but the headlights, the fan and the most important thing, to the processor (like the sound of sparks), this sound only sounded while I plug the charger.

  So, please help me out here, I don't know why he is not initialize

  Hey Buddy,

  This s really strange behavior, but I guess that this problem is related to hardware, I doubt it has something to do with the pre-installed software
  It seems to be a serious malfunction of equipment.

  In your case I contact an authorized service provider and ask the guys for help. In my opinion, it might be something wrong with the motherboard or the CPU itself but that s my personal opinion. So the easiest way is that you get in touch with the guys because they can give you an official response and make an accurate diagnosis. After that, you can decide whether you want to repair the laptop. ;)

• Satellite L650 - 1 P 4 - power plug does not work

  I have a problem with my computer:
  When I plug the power adapter to the computer, the computer did not work and the battery is no longer supported but computer works with the battery and the charger works on another pc.

  + The message was edited: assignment has been translated.

  You can start your laptop without battery and with AC power only?

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

• Satellite C660 shuts down after 3 seconds

  Received my new laptop yesterday and during the installation of windows 7 (not exactly sure to what extent the installation process has been) the screen turned a clear gray color and has started flashing, I tried to turn it off by pressing power button for 7 seconds, but he wouldn't answer, I had to unplug the charger and remove the battery to the laptop.

  Now, when I press the power button, the indicator light turn on, the cpu fan turns on and after 3 seconds it stops. I tried to put on about 100 times now, same result. Remove the RAM and HD makes no difference.

  Pending support Toshiba to communicate with me, so I thought I'd try here and see if there was an easy solution.

  Hello

  I guess that the Toshiba start screen does not appear at the beginning and you are not able to access the BIOS too. Right?
  Looks like you had a bad luck from my point of view its something wrong with the motherboard.
  But don t worry should guarantee all so either you could visit your retailer for laptop and ask for replacement (if possible) or you could get in touch with a Toshiba ASP in your country that could solve this problem.

  Good luck

• Satellite 1800 shuts down without warning

  Hello

  I have a toshiba satellite 1800, which I use for 6 months and it started to turn at random. I can't seem to find the problem I tried the new ram, but it turns out always. I even tried to reinstall windows XP home, but when I do, it happens to the part of the installation when it just loaded the drivers and at the beginning, before choosing options it turns off. The last thing on the screen when you try is when it says loading windows. He should ask me if I want to install windows or repair an existing installation, but just, it turns off. There only SP1 installed when I try to install SP2 goes out at halfway.

  This is starting to get boring. Sometimes very randomly. I can surf the web and watch video clips and listen to music for several days before that happens again and it will be then 6-7 boots before I can enter windows turns off everything as she gets into windows. Sometimes turns off before the desktop appears and a few times when all the icons. It is very random.

  Any ideas?

  Kind regards

  Paul

  Hello

  In my opinion if the warranty is valid you shouldn't do all experiences and should ask the service partner Toshiba guy in control of the aircraft. You should know that if you open Notepad, you will lose the warranty!

• Satellite A30 - shuts down during the installation of recovery or FDISK

  I have a Satellite A30 and I wanted all off it delete and start from scratch.

  Turned back with disc 1 CD product recovery, started well I was prompted to insert disk 2, it does well to about 80% then erased screen, then got the message "invalid partition table". I tried again and same thing happened. Connected FDISK back and chose option 1. 'create a DOS Partition or logic back drive' and the laptop stops. I put the startup option for no network or HARD drive CD player. At startup without inserted discs, I get the following. PXE - E61 madia tset failure, check cable.
  PXE - m0f: exit PXE ROM then freezes.

  Anyone have any ideas?

  I'm not sure at 100%, but from your description, I think that HARD drive get in trouble.
  How pxe message shows that means laptop can not find device bootable and as last it will boot from LAN.

  If possible, try to get a new HARD drive and check if the recovery procedure completes successfully. Old IDE hard drives are not more expensive. To test you can also use a used purposes, but of course has no HDD vice.