Satellite L670-105 - cannot use internal keyboard

Similar Questions

• Satellite L670-105 - HDD compatibility

  I had to repair my Satellite L670-105 system partition, I believe that the HARD drive is MK6475GSX, as some groups failed, I think it would be prudent to replace the disk. Then I think to install a MQ01ABD100 with or without SSD addon (in any case the original part DEAMS ending), and I want to assure you about compatibility.

  Thank you for the answers.

  I also think you should replace the original HARD disk. It's the HARD drive with SATA interface.
  In general you can enhance it with any 9.5 mm SATA HDD.

  In my opinion, you should increase the performance of s for laptop and improve it with SSD. More info on SSD you can pick up on http://storage.toshiba.eu/cms/en/index.html

• Re: After upgrade on Satellite A100 BIOS cannot use keyboard more

  Need help... after bios upgrade for Toshiba Satellite A100 my keyboard error... now I can't use my keyboard...
  If I used the external keyboard, as there not enough power into the USB...
  Now, how come back to start bios version...

  Thank you or any medium

  Hello

  Enter the BIOS (by pressing F2 at startup) and try to check in the Bios if compatible keyboard, legacy usb support (something like that) is enabled. It should help.
  Otherwise, playing with the up/downgrade Bios (especially, demote) instead of keyboard problem, can cause the crash of the complete system with white screen.

• Satellite P770-105 - not lighting - no keyboard backlight

  Hello

  Toshiba Satellite P770-105
  Win7 - PL, 64-bit
  Processor Intel® Core i5 - 2410M

  Problem:
  -no backlight soft touch bar
  -no backlight Touchpad
  -no backlight 'word on the left side of the laptop' Satellite

  Installed Toshiba Value Package added more problems:
  -no backlight soft touch bar - fukce buttons do not work (eco, WiFi, SOUND...)
  -no backlight Touchpad - no other function (scroll, zoom)
  -no backlight 'word on the left side of the laptop' Satellite
  -No keyboard key FN + Z fuction Illumination

  Help, please

  Your laptop was offered with Windows preinstalled & Home Premium 64-bit version so before you waste your time and try to fix it, back up your important data and install original recovery image. After doing this book will have factory again and everything works again.

  What is an option for you?

• Satellite A200-10W: cannot use shortcut keys Fn after installing XP

  I installed the XP drivers a new? Control, drivers, Hotkey Utility, but problem is staying. I can't? t use these keyboard shortcuts. Any ideas?

  Hello

  Satellite A200-10W belongs to the PSAEC series.
  Are you sure you used the right drivers for the A200 series right?

  In addition, I would recommend installing all the drivers available XP and tools on Toshiba as Chip Set Utility or hardware configuration page

  See you soon

• Re: Satellite L750-1XH - cannot use pre-installed Win7 Home Premium

  At the start of the laptop without accessing the past named screen user except in safe mode. User name of affected the screen goes black.

  Any ideas appreciated, wife is an attempt to do for College this week!

  Your ad is quite confusing and I don t understand exactly what is happening. If I understand right, you cannot use Windows, but you have full access in safe mode. Is this correct?

  In any case try to follow: start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool. Do the first step, check what happens and post comments.

• Cannot use my keyboard shortcuts

  Last night, I was playing a game on the internet that required me to use the CTRL space and arrow numerous amounts of times in a row, and now I can't use my keyboard shortcuts like ctrl + c, ctrl + v, or ctrl + alt + delete. I messed around a bit with the sticky keys options and made numerous amounts of different combinations to see if I could solve the problem, but so far, nothing has worked. I'm pretty sure that my problem is not apparent virus, I just want to know what I did to change the settings to its current form and how to get back to his previous 100% form.

  Hello, Ramona,.

  Thanks for posting your query in the Microsoft community!

  I understand that you have problems with the keyboard shortcuts. I will try to help you solve the problem as soon as possible.

  (1) what is the brand and model of the keyboard?

  Method 1: Check if you are able to use the on screen keyboard shortcut.

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-in/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  Method 2: You may have to uninstall your keyboard driver, and then restart your computer and your keys CTRL works once more.  To do this:

  (a) click Start

  (b) Control Panel

  (c) printers and other devices

  (d) keyboard

  (e) in the keyboard properties window, click on Hardware

  (f) click Properties

  (g) click the driver

  (h) click on uninstall, click OK

  (i) restart your computer

  See also: keyboard shortcuts for Windows

  http://support.Microsoft.com/kb/126449/en-us#appliesTo

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Satellite P10 804: cannot use the day before and the FN keys / hibernation

  Satellite P10-804. I had a virus and this has been supported by a professional. Since I can't use my Fn key and therefore cannot standby / hibernate etc. The sleep function does not work also if I use the "standby" button mode start Microsoft.

  The system just trying to go to sleep and restarts again, sometimes doing, it resets the date and time of the computer. Any help would be greatly appreciated. Thank you.

  Hello

  May I ask why you n t use the recovery CD Toshiba to restore the operating system on the P10 Sat?
  Simply boot from the restore CD from Toshiba that came with the laptop. This CD contains the Windows operating system with all the drivers and tools pre-installed.

  The installation process takes about 10 minutes. It of very simple but please note that this new facility will format the HARD drive.

  Other questions?

• Satellite L855 - 13G - cannot use the Webclaim service

  Hello

  I bought a Toshiba Satellite L855 - 13G (PSKACE-04Y00CFR) in France last year, but this computer is already leading me in trouble!

  The graphics makes noise, one of the USB port does not work, and now, without any change of software, the computer shuts off after displaying a blue screen with "KERNEL_DATA_INPAGE_ERROR".
  This blue screen just randomly (say about two or three times a day).

  I would send this computer for repair, but now I find something very weird: Toshiba has done everything possible to hide L855 - 13G!

  All first of all without result on the Web site:
  https://www.Google.co.UK/#q=%22l855+13g%22+site:Toshiba.com

  Second, the model is not listed in the support Center:
  https://www.Toshiba.fr/innovation/generic/SUPPORT_PORTAL/
  When I enter the serial number: no result. Also using the fields ' or is your product "model is not listed.

  Third, and better, I can't access the service of warranty claim for a Toshiba product for this computer: when I'm on https://weblord.toshiba-tro.de/Webclaim/ and I fill the serial number, the computer is identified (Alleluia), I have a green check mark for the status of the guarantee and "your product is still in warranty period."

  But then, I can't click next and mention "product not available: Unfortunately your product is currently not available" appears instead.

  So... apparently Toshiba is is best to forget about the Toshiba Satellite L855 - 13 G, but for unlucky enough to have people buy a what are the next steps?

  I would like to be contacted by someone from Toshiba to get an answer or a proposal to change my computer or at least fix it!

  Many thanks in advance,
  Best regards.

  > I would like to be contacted by someone from Toshiba to get an answer or a proposal to change my computer or at least fix it!

  First of all, I want to provide you with information on this community.
  This is a user to user community where you meant fans of Toshiba. You won't find any Toshiba here people

  Now some details about the fix for laptop:
  In case your laptop computer s hardware began to malfunction, you can contact the maintainer authorized Toshiba in your country in order to fix hardware problems.
  Here on this page of Toshiba ASP you can find all available worldwide FSA:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  Last but not least, he should know that the warranty only covers hardware problems.
  If in case the laptop does not work due to some software problem, the warranty would not cover the cost. This is why I would recommend you to retrieve the computer laptop back to factory BEFORE you contact the ASP.

  I hope this info helps a bit.

• Re: Satellite L350-170 - cannot use cloned recovery partition

  I have a laptop of s Satellite L350, one friend that I tried to fix it, but the HARD drive is faulty, so bad, that I can't create the restore disks. I cloned the image to another HARD disk partition (Yes, I created 2 partitions) which is a western digital, for some reason any when you press F8, I can't in the restore option, but I can't the disk faulty, is - because you use a Toshiba HDD only?

  Thanks in advance

  Chris

  Hello Chris

  It has nothing to do with Toshiba HDD. This option works when the laptop is preinstalled with original recovery image. This with cloned partition will not work and recovery of HARD drive option will not appear in the advanced boot options.

  Only when you install Recovery on this new HARD drive image, going to market.

  One last thing: this old L350 works fine with Win7 32 bit so if possible install instead of using original Vista.

• Satellite Pro L650: cannot use Skype - cam and microphone are not connected

  Having problems connecting to Skype.
  It seems that the microphone and web cam are not connected.
  Skype self-test will not respond with the voice test.

  Hello

  Have you checked the Skype settings?

  There, you should check if the right microphone and the internal webcam have been chosen.

  By the way: is the webcam properly recognized in Device Manager?

  You can use the webcam using the preinstalled software webcam?

• Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

  Hello!

  I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

  Now, I can't use any PCMCIA card.
  Everything works fine, but I can't use two PCMCIA slots.
  The cards will be recognized, but the system says that there is a resource conflict.
  (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

  Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

  Please, help me!

  Someone got an older version of BIOS?
  My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

  I have to downgrade the BIOS to at least 2. 6.

  Bye,.
  Martin

  Have you tried installing WXP again using Toshiba Recovery CD?
  I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

• Satellite P300-150 - cannot use a USB

  Hello

  I have a satellite p300-150 with Windows XP PRO SP2 and I can't use any USB key (I can't open) but I can use e.g. USB mouse.

  Thank you
  Fotis

  Hello!

  You can format the USB on the laptop, and you can see it in disk management?
  Do you have the yellow marks in Device Manager?

  This shouldn't be a problem with the USB ports, I think that the USB have some errors.

  Good bye

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Satellite 2430-301: cannot use 2200BG WLan card because the switch is off

  Hello

  I have a Satellite 2430-301, which was not delivered with WLAN functionality. But I discovered, that there is a MiniPCI slot in the laptop.

  So, I bought an Intel® PRO/Wireless 2200BG Minipci card. After that I joined the card in the laptop, it has been detected by windows as a new network device. I downloaded and installed the drivers of Windows XP (because I have Windows XP installed on the laptop) of Intel (9.0.4.17) home page. The installation worked perfectly.

  Now I tried to connect to a wireless network, but the software Intel says that the card is on 'off '. So I changed the menu drop-down on "on", which resulted in a mistake in German: "Die Intel (r) PRO/Wireless-Netzwerkverbindung ist noch deaktiviert.» Aktivieren Sie sie über your Hardware-switch. "(which means something like 'network Intel (r) PRO/Wireless connection is turned off. Turn it on with the hardware switch. »).

  Although the switch was already in position "on", I spent several times - nothing important happened. The led next to the switch will not illuminate in both positions.

  Are there problems of incompatibility between "Toshiba Satellite 2430 301" and "Intel PRO/Wireless 2200BG?

  I did something wrong?

  Is - this darn broken hardware switch?

  Any suggestions?

  I would be really happy if someone could help me :)

  Thanks in advance,
  Thuriel

  Hello

  The hardware switch led should light up if the switch is on.
  In addition if you want to use the WiFi network you must go to the WLan with FN + F8 option.
  In addition, you must check the WLan card properties in Device Manager. Here, you enter the Advanced tab. In the field of property choose radio power option and select the value to on.