Satellite L670 - strange problems with HDMI connection

Similar Questions

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Satellite C600/C660D - problems with WLAN connectivity

  Hi guys

  I recently bought a Toshiba Satellite C660/C660D laptop to replace my old. I set up a wireless connection at home too. According to my laptop and wireless connection that I am connected but when I go to use internet and try to search for something it won't let me. I ran the troubleshooting and Diagnostics over and over again and the message I get is "your computer seems to be correctly configured but the device or resource is unresponsive."

  It is not a problem with the internet connection that I tried to plug in on my old Toshiba laptop and it works perfectly well and my sister tried it also on his Sony laptop and no connection problems.

  Is there a setting that needs to be adjusted?
  I would be very grateful for any assistance with this and as I don't know what else to do. its starting to get a bit frustrating now

  Thank you

  It's very strange.
  Have you noticed the same thing using different browsers?
  You can use any other application like Skype or MSN?

  What you can try is to update WLAN driver.

  Please visit Toshiba s WLAN portal and install the latest driver for your WLAN card - http://aps2.toshiba-tro.de/wlan/

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Satellite L670-153: problem with a SONY 4 GB mass storage

  I have a portable satellite L670-153 with Windows 7 64 bit. When I conect a 4 GB SONY USB mass storage, Windows install the USB mass storage. But after a few minutes, the USB mass storage is disassemble and assemble and disassemble some indefinitely.
  I update the bios and the driver from the chipset, but I still have the problem.

  And what now?
  You can test the functionality with the other 4 GB USB key? Just to see if other brands will be recognized correctly. The problem when used on another PC with the same operating system?

  I have 2 SanDisk and 1 stick USB Toshiba and each of them are recognized properly on different laptops?

• Satellite L670-1HD - problem with audio interfaces USB 1.1

  Hello

  I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
  When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
  You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

  I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

  Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

  Thanks in advance for the help!

  See you soon,.

  Stefan

  Hello Stefan

  In my view, you see the problem from the wrong point of view.
  Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

  You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
  Something like that is definitely not possible.

  In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
  They should know how the device should work on new laptops with USB 2.0.

  It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

• Satellite A350 - strange problem with hitatchi HTS ATA 320 GB HARD DRIVE

  Recently bought a Toshiba Satellite A350 - still under warranty.

  My problem started with gel/delay of Windows whenever I transferred specific files.
  I found that a lot of my files are the same; It's then that I transfer or open these files - this can take 10 minutes to load crash, then displays a corruption error
  During this phase:
  The hard drive makes a slow repetitive scratching sound
  The laptop hangs for an average of 10 minutes before returning to a usable state - I found more than 15 files and suspect many more that are corrupt.
  I suspect a faulty hard drive, like the check disk crashes and my system hangs whenever I open / transfer of these files.

  I tried to reformat and install the new OS, but always check disk crashes and I lost a lot of important files, because they became unusable.

  Is there something I can do to remedy this
  or
  If the hard disk is defective, Toshiba will replace?

  BTW - I m in Australia.

  Hello

  Exciting announcement, but it will be interesting to know how exactly you do and what kind of data are responsible for this. I want to say I use laptop computers and can not say that some of the data makes my crazy HDD.

  If you really think that there is a problem with the disk HARD nearest Toshiba authorized service provider contact. They will check the functionality of the HARD drive, and if there is a serious hardware problem, you will get a new. Of course for free.

• Satellite P300 - strange problem with num lock keys

  I had a problem with my keyboard lock num. I have a P300D - 131

  By pressing '4' and '8' at the same time, it shows on the screen '4 '.

  By pressing "0" and "6" at the time, tamed, it shows on the screen "0 0".

  This also happens if I touch the very fast numbers. That's why you can't count on the num lock keys! I have this problem since I bought the laptop in July 2008. Now, I found this forum and I hope that really that someone can help me solve this issue!

  Thank you
  HDW

  Hello

  These issues in the past have been resolved with BIOS update. I therefore recommend as a first step of the BIOS update.
  Check the current version on your laptop and the most recent proposed on the Toshiba download page.

  To be honest I don't understand why you waited so long on this subject. Laptop warranty valid and the nearest Toshiba authorized maintainer can help you about this.

• Satellite A305 - strange problem with power LED

  I have the Toshiba Satellite A305-S6825 and I noticed that when I run the laptop on electric power, the battery light (LED) on the front of the laptop is "illuminated".

  AC power ligtht is the first light on the left; and law who is the witness bright power switch; and in which law is the "LIGHT of the BATTERY. It is the light, I want to talk to.
  I can understand why the light can be WE when I was using the laptop with only the (power) battery in operation. But why the battery led (lit) when I have the laptop plugged into an electrical outlet?

  Is this normal?

  When I turn on the computer, after it's off for a while, and it is plugged into an electrical outlet, I see that battery light is kind of purple color, until the battery reaches 100% charge and then it becomes white.

  When I put the cursor on the bottom right of the screen battery icon, it reads (after full load): full load 100% current power Plan - balanced.

  Hello

  > I have the Toshiba Satellite A305-S6825 and I noticed that when I run the laptop on electric power, the battery light (LED) on the front of the laptop is "illuminated".

  This is nothing unusual. I have another set of Satellite and my battery LED light if the laptop is connected to the power adapter too.
  It changes between the function light orange and blue if the battery is fully charged or not.

  It seems you ve not laptop wholesale experience here is the led and the LED are very effective and don t waste power as a common light bulb.

  So relax and enjoy you machine!

• Satellite L40 - strange problem with battery LED indicator

  Hello

  I have Satellite L40 - 18w and I have a problem. When the battery is low or that he is in charge of the led is orange, but when it is fully charged there is no led indicator. Even if I turn it on, there is no light and if I check the power connection options AC adapter is recognized. Operating system is Windows XP PRO SP2. I tried to find the Toshiba Power Saver, but it seems that he can't stand L40.

  Would it be a hardware or a software problem?
  Thank you in advance for your help!

  I had the same problem.
  Remove and install back the battery.

• Satellite P850 32Z - problems with internet connection

  I used the internet from a laptop computer for a long time without any major problems until a couple of days. When I turn on my laptop, although it shows I get full bars in terms of connection to the internet, but when I open the web browser (Chrome), the web page does not open.
  I tried switching on and off the router but nothing helped.

  I tried many time to troubleshoot and what are the messages that I had before:
  Diagnostic strategy does not start
  A default gateway is not available
  Security or Firewall setting may be blocking the connection

  I noticed that after the resolution of the problem, the problem is not fixed (around 90%) but sometimes it works when the laptop is cool, but it fails again when I put the laptop to sleep.
  Anyone had similar problems before?

  Hello

  Did you notice the same problems using a LAN and WLAN connection?

• Satellite L650 - strange problem with webcam

  Hey

  Can someone help me?

  I bought Toshiba laptop recently. He series Satellite L650 s but built in webcam it worked, so now it does not work, when I opened to take the shot, it's just to show image by default... led light is pn, but it is only to take capture an image by default, even when I am recording videos

  Help, please.

  Start application Web Camera and click the last effects of the option. Check the last tab and do not forget, that it is set to off.
  Check all the settings there. You will find the option where you can turn this option off.

• Satellite U300 - strange problem with volume control wheel

  I bought a U300 last week and I find that the volume control wheel doesn't move very easily. It seems that you have to push it slightly to adjust the volume, and when you release your finger, the volume goes in the direction you moved to slowly. Everyone knows this?

  In addition, when pressures above the express card slot the housing compresses. This happens on all the U300s?

  I would go back to the store I bought in and ask, but I live quite some distance from him so I thought I'd see if anyone here could help first. All responded very appreciated.

  Thank you.

  Hello

  Looks like the wheel is stuck and something around the wheel blocks the volume wheel. I think the best idea is to return the machine as you said, since it s very unusual described what you´ve.

  You can also send your machine to a service partner chartered for an assessment of health/repair of equipment.
  If you need help to find the one closest to your country, you can use the following link to find some:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck, welcome and good weekend

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

• Strange problem with HP OfficeJet 6500 709n

  I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

  The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

  No idea why this is happening and how to fix it?  Thank you.

  This problem of not being able to scan only started after upgrade to Windows 8?

  If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

  To uninstall the software, follow these steps:

  1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
  2. click or tap the name of your HP printer, and then click or tap on uninstall.
  3. follow the on-screen instructions to uninstall the software.

  After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

  Driver and HP Officejet Full Feature software

  Install this version of the software and try to scan now!

  Let me know if it works for you, good luck!

  -Kyle