my computer is grateful is no longer my disc code 45 acomdata external hard

Similar Questions

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• E4200 no longer sees my 1 TB Iomega external hard drive

  Hello - I got an Iomega 1 TB external hard drive connected to my router E4200.  I got confgured actions and they have been correctly running on the network.

  As of yesterday, all that has stopped working. The router does not see the disk; It is as if she is not plugged in.

  I rebooted the router and it still does not work.  I connected the hard drive directly to my PC to check that it works, and it does.

  The router is running Ver.1.0.03 (Build 14) of the firmware (the last).

  Any suggestions?

  Thank you!

  OK - I found a place to move my files and did a re - format drive.  Now he sees the player very well!

  Yes.

• With the help of a backup on an external hard drive to transfer files to a new computer.

  I recently got a new computer and I need to transfer my files via my new computer. Both computers running Windows 7. I have an external hard drive that has all my files from my old computer on it. I went into the control panel configuration, then system and security, and then in the backup and restore. I then clicked on "select another backup to restore files from" and looked for my external drive. I made sure that it was connected and up-to-date as well. However, he never showed up.

  I would like to manually just transfer the files, but it seems as if there are readers split on this computer for 'BONES' and 'DATA '. For this reason, I'm not sure which car I'd put even files on.

  How can I transfer these files?

  Hello

  I understand that you are having problems with the restoration of the backup files of the external hard drive. Correct me if I misunderstood the question.

  (1) what is the version of Windows 7 is installed on your computer?

  (2) have you made changes on the computer before this problem?

  (3) you receive an error message when you try to restore?

  I suggest you to consult and follow the steps in the links and check if the problem persists.

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• "The scan of the computer is enabled is no longer" false error

  Hello

  I bought and installed a HP DeskJet 3521. It is configured for wifi connectivity to two computers on our home network. A laptop computer is 8 64-bit Windows. The other is Windows 7 Pro 64 bit.

  The printer seems to work perfectly. However, the driver regularly (as in all the several minutes or so) pops up a message saying "the Scan of the computer is enabled is no longer" or something like that. It is apparent from the system tray. It fades after a few seconds. Otherwise the printer seems to work very well. This happens on two laptops.

  Laptops are in the same room as the printer and the router. The signal strength is high.

  Why did this message occurring and is there a solution for this?

  Thank you

  It is very probably the same problem I had with the HP printers for years.  It happens when the printer goes into a power saving sleep state and falls of connectivity.  To resolve the issue, you have to walk on the printer and the power of the cycle.  It has NOTHING to do with your router or static/dynamic IP allocation.  It's the fault of crappy entiely firmware and HP software.  HP 'experts' are playing the same game of blame-the-other-manufacturer or blame the old user that HP has always played.

  My current HP printer is the third HP sub-standard product I've owned... on three (Yes, I know, shame on me twice).  I've owned a high-end, expensive laptop which overheated during playback of a video to youtube and two printers which disengages automatically when they entered in the mode 'sleep'.  It will be the last HP product I already own...

• My computer shuts down is no longer with button closure

  My computer shuts down is no longer with button closure. Works only with button on the computer case.

  * original title - system update updates microsoft windows *.

  Hello

  1 are there any changes or updates made on the computer?

  2. what operating system is installed on the computer?

  3. what happens when you try to shut down the computer?

  4. do you get an error message? If Yes, what is the full and exact error message?

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  a. restart your computer.

  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Advanced Startup Options.

  c. using the arrow keys, select the Safe Mode option.

  d. press the Enter key on your keyboard to start Windows Safe Mode.

  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows goes into safe mode.

  f. check if you still have the problem.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article about how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: when the diagnosis is complete do not forget to reset the computer to a normal startup.

  If the problem is not resolved, please provide more information to help you best.

• Windows XP computer - my wife is no longer will start and load one of its programs.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! My

  Ideas: Computer my wife is no longer boot up and load one of its programs.  When you turn it on, Windows XP loading blinks and then you get an error message that says: "you cannot use MSN to connect. Please choose another dial to open a windows session.  With this message, all you have is a 'OK' that affects when you click it, gives you your photo screen saver and nothing else, so you have no where to go.  A few days earlier, she had an alert to update update to windows 8, but she refused and it seems that since then, she has been the problem.  Can anyone help?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Refusing to install IE8 would cause problems, Indy. Try to post here for assistance instead: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my computer will do is no longer a system restore

  Original title: System Restore

  my computer will do is no longer a system restore. I use windows XP.

  Well, it is good that you got SR works again.  When you reinstall, SR deletes all old PHI so things work as expected.

  If SR was quite broken you need to reinstall, it was really broken and sometimes malware will do things like that to make you believe that you need to use a Restore Point, perform a repair installation, or drop and completely reinstall your XP if you really never.

  Once you get an infection, it is sometimes a good idea just to hit all the old restore in any case Points in case the infection got inside of them, then make a new brand that you know is clean.

  If you have an infection, it seems that CA to disappoint you, but no anti software does seem to know about everything, it is so good to have more than one.

  The free MBAM and SAS are scanners of respectable, good, without real time (right now).  SAS can find a whole lot of tracking cookies, but I would still use it.

  When MBAM and SAS to run clean, it would be the time to look at your other questions.  Sometimes, there are some small remains of infection that must be deleted manually.

  Try to explain that the something to work with errors at the time of saying exactly, and also when you see them (what you do when you see them) and then decide what to do next.  Sometimes they say things like cannot run. Cannot be found, cannot open, error loading, etc.

  Do the best you can to relay messages you see.

  When things are all cleaned up, you should test your SR and make sure that it really works (or fix).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How can I disable the software recorded on a computer I own is no longer, the computer no longer exists?

  How I can disable the software recorded on a computer I own is no longer, the computer no longer exists?

  Contact Adobe, contact the customer service

• How can I disable the creative suites of computers, I no longer have access to that? I would like to download the program on my new computer, but it is no longer gives me the option to download.

  How can I disable the creative suites of computers, I no longer have access to that? I would like to download the program on my new computer, but it is no longer gives me the option to download.

  You must contact the support by chat and ask them only to reset your activations... ask for more this will cause probably by sending back you here.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  Download Creative Suite:

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Computer will recognize is no longer my external HARD drive

  Original title: device notrecognised

  I have a WD external hard drive. It was working properly until a few days, but now none of my computers recognize it. No message is displayed.

  When it is attached to the computer, it shows that the driver is installed and ready to use, but the device is not visible anywhere. I have a unable to locate in "My Computer".

  I have a lot of data stored in this and cannot do without them. Help

  Hello

   
   
  1 did you do changes on the computer before the show?
  2. which version of the operating system you are using on the computer?
  
  Method 1:
  

  You can check if it is detected in the managememnt disc.

  Method 2:
  You can check the Device Manager and see if the computer detects any error message.
  a. Click Start.
  b. management of devices of the type in the search box, and then open it.
  c. check that the device is listed there.
  d. right-click on the device, and then click Properties.
  e. under the general tab, check the status of the device.

• external hard drive not in management of disks and in my computer. Hard drive is not grateful. Hot to get the content

  Hi, I am trying to connect my external hard drive, but it is not visible in my computer or disk management. But the disk is running, can you please let me know how to make visible and removes the content. Thank you

  If its not visible in disk management, the drive does not work, your way of connecting a player to your PC is defective or if only a usb connection, the usb port does not work (check for brands of yellow warning device manager)

• External hard drive to the computer transfer: suddenly stops working

  I'm trying to transfer data from an external hard drive to my computer. With few files size KB, it works very well, because rate of file transfer is done in a few seconds. However, when I transfer data that takes a little Pluss, when the progress bar is displayed, then I have a problem: in the middle of the transmission of data, the computer constantly to transfer data b/c apparently the external HD can no longer be located. It is followed immediately by an autorun message, telling me that my HD is connected. So to keep it less complicated, so the HD transfers, the computer stops abruptly, grateful as he was ejected. Right after that the error message, reconnects the HD somehow, and I get the AutoPlay area and further confirmation that it is connected. It's not fixed in time, like after a few minutes; It only occurs when the transferred data is large enough such that a progress bar is necessary.

  Hi sbmuser,

  Will you need to contact the computer manufacturer for assistance on this issue.

• External hard drive not in my computer

  Hello

  I have a question on my external hard drive. It's a drive hard 2.5 "of Toshiba (1 GB).
  I used it already for a long time on my laptop (WINDOWS VISTA) and it worked perfectly until today. I plugged in my hard drive as
  usual and it does not appear on my computer. I looked on the internet and found something about research
  Start - Run diskmgmt.msc, (uitvoeren) - so I tried.
  He showed the next thing on my HARD drive:
  Disc 1
  Unknown
  931,51 GB
  Not initialated (niet geinitialiseerd)
  Unassigned (niet toegewezen)

  I didn't know what to do, so I tried some things. I pressed the right mouse button and he said "initialize disk". I pressed on it and he gave me 2 choices: MBR or GPT.
  I tried both, but they both said: data error: Ketal redunatiecontrole.
  So, I tried something different. I pressed the right button of my mouse again but this time on the black bar beside the disc information. He said "New simple volume", but I dared not go further because I didn't know if I would lose my data or not, if I would. Also, I didn't know how big the new volume should be.

  He also said that the device works properly when I press 'characteristics '.

  I don't know what to do now, and also I don't want my files to be deleted.

  Can someone help me?

  (Sorry for my bad English, if I write it in Dutch because you do not understand my problem, please tell me ;)))

  Can you please test it on another computer just to be sure, the same thing happens again?

  When you connect you hear beep sounds when the new device is connected?