Satellite L750 charging and the question of the random stop

Similar Questions

• Satellite C660-1CQ - purchase charger and the battery in another country

  About 4 years ago, I bought a laptop C660-1CQ Toshiba of the Qatar. Now I'm in India. The laptop is showing problems in charge and the battery. I want to buy a new battery and charger. But I won't be going back to the Qatar to buy it because now I am India. If I can a battery and a charger in India for my laptop Toshiba C660-1CQ?

  If I can a battery and a charger in India for my laptop Toshiba C660-1CQ?

  I'm sure that you'll be able to find some online dealers who would be able to provide the documents referred to in India.

  The Satellite C660 would support the DC 19V power adapter 3. 95A reference number: PA3715E-1AC3
  Also the & stack PA3817U-1BRS will be compatible

• Satellite L750 - stuck on the Realtek card reader

  Hello

  I just got a Toshiba Satellite L750 / 00K and I turned it on for the first time. He asked about the recovery and I chose 64-bit, and then on the settings in the box. It restarted once then I left it to charge. I came back and he was stuck on the Realtek card reader. It has been like this for maybe 2 hours, I can move the mouse but nothing has changed. He said that commissioning could take some time but I don't know if something is wrong. Help, please!

  Thank you

  Hey Buddy,

  Installation of recovery can take a very long time. In your case I'd wait a bit more.

  If it helps doesn t you should try to start installing recovery again. You can do this if you access Windows Advanced Boot menu and select Repair my computer.

• Toshiba satellite C655-S5128 and the sound goes in and out

  I have a toshiba satellite C655-S5128 and the sound goes in and out, I have to click the button on the lower right side speaker so that he works for a very short minutes the out again once and I have to repeat this if I want sound, iv tried all the troubleshoting there can anyone help?

  
  
  
  
  Please write me help * address email is removed from the privacy *.
  
  
  Thank you, Laurie

  Hi jthoodrat,

  Run the difficulty in this document to resolve common sound problems in Windows.

  Let us know if that helps.

• L540 Windows 10. Plugged in, not charging, then the pc stops. Cannot start.

  Brand new L540.
  Windows 10 fresh install, not improved versions of other windows.

  The Lenovo system update is installed and installed all the drivers (Intel Wireless Lan driver).

  When the charger is plugged in, the screen blinks several times, it says plugged in, no charging current. Then the laptop stops. When you try to start windows again, the laptop stops immediately after the windows 10.

  Unplug the charger and the laptop starts and works very well.
  The battery can recharge very well when the laptop is turned off.
  If the battery is 100% laptop works very well with the charger connected.

  Basically, the laptop works fine, except when you try to charge the battery then in windows 10. This causes a stop.

  I tried the solutions previously suggested to stop and remove the battery, nothing works.

  Motherboard replaced by service of Lenovo.

• When I'm looking online, I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.

  Hello

  I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.  I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank you
   
  Original title: help again...

  I have moved your question to area drivers & hardware.

  If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740

  Updated drivers can be made of:

  https://Downloadcenter.Intel.com/default.aspx

  Best bet may be to contact the vendor of PC.

  -steve

• Hello, during the installation of Adobe Creative cloud I shows me the error 1 and the download stops. How can I fix? I own Windos 7

  Hello, during the installation of Adobe Creative cloud I shows me the error 1 and the download stops. How can I fix? I own Windos 7

  Refer to this:

  Download cloud creative to troubleshoot and install questions

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• screen flickers and the game stops, and table appears all playing the cfs3 game

  Original title: cfs3 crashes to the desktop

  Hi, a friend gave me used fcs3. It installed fine, everything works fine, but after 30 to 60 minutes, the screen flickers and the game stops, and my table is displayed. I get no error message at all and I went topics in microsoft help for cfs3 specific website if overwrite problems cfs3, which there was a huge page full of symptoms and types of accident etc but since I got no error message number refer to I have read the whole search'm thiing and the causes and resolutions , but found nothing there.

  I tried to restart and the program should run for a while then crash and return to the table.

  I tried uninstalling and reinstalling, but I got the same results.

  HP a6110n

  AMD Athlon 64 x 2 Dual Core processor 4400 + 2.30 GHz

  RAM = 4.00 GB

  32-bit operating system

  Note Windows experience 4.9

  80% of my disk space is available.

  Also the power supply 450w

  Map of Envidea 8600

  Whole body there suggestions?

  Thank you, Ed S.

  Hi P.K.

  The information and links have been informative and educational and I'll save that for a later use. However, the graphics card was the problem (I discovered) so I'm upgrading and also I move FSX on my new pc (a pc gamer VELOCITY) and it works perfectly. Thanks again for your contribution.

• I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  original title: local area connection problem

  Hello

  1. What is the exact problem you are facing with local connection?

  2. how many computers have you plugged into the network?

  Please provide the information of network event logs to help you best.

  Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  In the meantime, run the troubleshooter mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Hello, I'm trying to download the trial version of photoshop and from first pro, and the download stops pour two applications to 42% (I tried to download photoshop then seen that Lydia I tried first but none of that works no pl)

  Hello I'm trying to download the trial version of photoshop and from first pro and the download stops at 42% to every time, what to do?

  See the link below:

  (Exit code: 34 please see specific errors below for troubleshooting.) For example, ERROR: - Summary - 1 or fatal errors, 0 FATAL error: "Microsoft Visual C++ 20 payload.

• When I start installation Creative Cloud App it starts for about 10 seconds and then initializing bar disappears and the download stops

  When I start installation Creative Cloud App, it starts in about 10 seconds, then the initializing bar disappears and the download stops, anyone have any ideas?

  Jennifer,

  Please try the steps listed in error: "unable to install". Creative Cloud Desktop to reinstall the creative Cloud Desktop application

  You can also see these links:

  Creative Cloud App Installer disappears after "initializing Setup" without having to download (Windows)

  Installer of creative cloud disappears  (Mac)

  Guinot

• Satellite L750 - to change the input Mic and Line In

  Hi, I have a Toshiba Satellite L750 running Window 7. I have a small studio in which I have a mixer connected to a drum kit.

  On my old Toshiba Satellite C660, when I plugged it to the output of the mixer to the microphone, a pop box port up appeared asking me what I had just plugged.
  I chose Line In and everything was fine

  With the L750, I get no such box and the computer just treats it as a microphone, as it compresses everything from the port.

  I tried the Smart Audio installed in the control panel and it does nothing. Is there anywhere that I can choose the socket is treated as Line In, no microphone.

  Getting boring now!

  Thank you

  > On my old Toshiba Satellite C660, when I plugged it to the output of the mixer to the microphone, a pop box port up appeared asking me what I had just plugged.

  Yes, but the Satellite C660 was equipped with a microphone / lin in the port.
  Are you sure that your L750 supports a combi jack mic / lin in?

  You can find the description in the user manual.

• Satellite L750 - display of the bands of questions

  In the last two days, my screen suddenly started degraded bands like reading to a depth of less than normal color. There is serious of bands in dark areas of the screen and low color values are clipping.

  I tried to re - install Nvidia drivers, change the display profiles, change the depth of color and the management of colors without success.

  If anyone has any experience with this problem and can help, I'll be very grateful.

  Hello

  Is there a possibility to test the GPU functionality and an external monitor? Just to see if everything is OK on the external display.

  Did you notice the same problem when you start the laptop in SafeMode (F8 at startup)?

• Satellite L300 - charger causing the freezing

  I have the Satellite L300 with 64-bit Windows 7 market. Computer works fine without charger. Charger charges the battery ok with the shutdown of the system. Charger charges the battery ok when running in safe mode.
  Reinstalled operating system and the updated drivers that may be when the laptop is running on battery power.

  If booting with charger plugged will start all the way until the end of the Welcome screen, then freezes. What exactly will change at this stage? Battery is fine until this charger is plugged in and then immediately freezes. Laptop can't or don't run without battery charger - freezes at welcome. Battery charger no problem as long as the same results with the same charger.

  Toshiba tech suggested reinstall OS and drivers - DONE - No. difference nothing that changes cannot be made in safe mode or without charger attatched. By reading the forums looking for solutions, I find that many suffer from this problem and no definitive solution coming to hand. Toshiba seems very shy to attack this problem in general and my experience with them on the phone seemed to have my partner ducking and diving.

  For me, the question seems to be in the distribution of electricity (hardware or software), but I've reached a point that someone with superior knowledge must take my hand to guide me. If anyone can help.

  Hey Buddy,

  I assume you are using an original Toshiba AC/DC adapter, right? Or are you using a 3rd party charger?

  I think Toshiba knows only what at this point where the laptop freezes will be available...

  You have reinstalled Windows Toshiba Recovery disk or is it your own installation of Windows 7?
  If so I would try the Toshiba Recovery disk Windows installation to ensure that the problem is not software or driver related. TOSHIBA recovery disk contains an image of the settings from the factory with all the drivers and tools.

  This means that if the same error after the installation of recovery it s a hardware malfunction :(