Satellite L750D - can't access 4 GB of RAM under Windows 7 64-bit

Similar Questions

• Satellite Pro A100-830 - can only use 3 GB of RAM under Windows 7 64-bit

  Hello

  I just upgraded my laptop Windows 7 Ultimate x 64 and also improved my ram to 4GB (2x2GB)

  Windows is to see all 4 GB but says only 3 GB is usable, because it is a 64-bit version of Windows wouldn't be able to use all the 4 GB?

  Any help appreciated

  Thank you

  Laptop specs

  Intel Core2Duo T7200 2.0 GHz
  RAM DDR2 677 MHz 4 GB
  ATI Radeon Mobility X 1600
  120 GB HD

  Hello

  Have you already checked the BIOS? How much RAM show the BIOS?
  And what kind of modules you have exactly?

  Normally, it should be possible to use full 4 GB of RAM on a 64 bit OS as your laptop also supports 4 GB.

  Maybe you should also try updating the chipset driver. You can find it on the Toshiba site.

• Can't access icloud contacts in Outlook 2016 (Windows 10, 64-bit)

  I installed Outlook 2016 Windows 10 and thereafter, icloud 5.1.

  After the launch of Outlook I can't access my contacts icloud.

  The German error message said

  "Sharp Ordnergruppe kann nicht open werden. Ein unerwarteter Fehler ist aufgetreten.

  Informationsdienst der "C:\Progra~2\COMMON~1\Apple\INTERN~1\APLZOD.dll" nicht loading werden kann. ME sie, ob der Dienst und konfiguriert ist installed. ' - which means: APLZOD. DLL cannot be loaded.

  When you check Add-ins installed under Outlook options, I can see iCloud-Outlook-Add-In under

  C:\Program Files\Fichiers Files\Apple\Internet Services\APLZOD6432. DLL.

  This all works fine under Windows 8.1, Outlook 2013 and icloud 5.1

  I got it now works by connecting to iCloud and re - connect.

• I am not able to access more than 2 GB of RAM under Windows 7 64-bit. How to solve this problem?

  I bought a new laptop - Asus X42JY with 6 GB of RAM. My system properties computer watch 5.86 GB usable memory. But I can't seem to access more than 2 GB. During the use of games and video editing software, they start to get stuck when the piston reaches 2 GB mark. The CPU Gadget even refrigerators up to 34% of RAM. How can I solve this problem?

  Hello

  Thanks for the reply.

  You can read these articles and check if that helps.

  Diagnosing memory problems on your computer: http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer

  Limits of memory for Windows versions: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx #physical_memory_limits_windows_7

  Usable memory may be less than the memory installed on Windows 7 computers: http://support.microsoft.com/kb/978610

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Cannot access the internet with bridged network - Windows 7 64 bit host, XPSP3 comments

  I use VMPlayer v3.0.1 build-227600 on a PC under Windows 7 64-bit. My guest operating system is Windows XP Professional w/SP3.

  I read all the messages on the use of NAT for the guest operating system can access the internet. But when I do that my guest is unable to access my Oracle server on my network. If I use Bridged my guest can access my Oracle server, but it cannot access the internet! How can I fix it? Shouldn't VMPlayer allow the guest OS to access the network and the internet? I need these two features.

  Any help would be appreciated.

  the simplest solution would be to add a second NIC to your comments, so that you can have bridged and NAT at the same time

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Satellite A200 (PSAE6) - RAM on Windows 7 32 bit upgrade

  I have a Satellite A200 (PSAE6) and I wanted to put more 2 GB of RAM, but tell me the Windows 7 Ultimate 32 recognizes only 1 GB means a total of 3 GB.

  Is this true?

  Hello

  Usually the OS 32-bit Windows recognizes ONLY 3.2 GB of RAM due to the limitation of the 32 bit OS.
  Therefore, you cannot use 4 GB of RAM with Windows OS 32-bit (Win XP, Vista, Win 7).

  But the upgrade to 4 GB RAM also depends on the chipset and BIOS.
  If both parties (BIOS and chipset) are not 4 GB RAM capable then you would not be able to use 4 GB of RAM, even using the 64 bit OS.

  Welcome them

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

  How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

  Hi poomoon,

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us try to restore your computer to a previous state of safe mode.
  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. in the System Restore dialog box, click Next.
  4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  5. click on finish.
  6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  I suggest that you create a restore point before you follow the instructions below.
  How to manually create a restore point?

  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.

  In the System Protection dialog box, type a description, and then click on create.

  You can also try to remove the entry by using bcdedit command in Vista by following the links below.
  1. click on start.
  2. type cmd and click with the right button on cmd.exe to select run as administrator.
  3. Enter the following text.

  bcdedit [{ID}] /deletevalue datatatype

  The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

  For more information, please see the links below.
  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
  http://msdn.Microsoft.com/en-us/library/aa906211.aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How can I use the CC of color under Windows?

  How can I use the CC of color under Windows?

  Or is it an online color Analyzer?

  Hello

  You can use CC to color online at the Adobe color CC. It is a great web app.

  Sue.

• Satellite A350 - can't access internet

  I have a new Satellite 350 running under Windows Vista (SP1).

  I am unable to access the internet despite the recovery disk, disable firewall and antivirus. The computer comes with much unwanted preloaded software. Software Toshiba Config finds no connection problem. External modem works normally with my old computer that runs Windows XP, but not with the same settings on my new.

  Is it experience of others. What can I do besides installing another OS?

  Thank you

  Hello!

  First we need some practical information:
  What laptop you have exactly? What is a Satellite L350 for example or another?
  What type of connection do you use? What is WLAN?

  Before connect you to the internet you should check for yellow exclamation marks Device Manager and maybe you have to upgrade your WLAN and LAN card drivers. The two you can find on the Toshiba site.

  Last but not least, you should try to reset the router.

  Good bye

• Satellite L350: Can not access the recovery partition by pressing 0

  Heya

  I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  The reason why I want to access is:
  I have a l350 Toshiba with a partially installed windows here. For now, he gets the "starting Windows" and "instalation program's services began" (in Norwegian) which stops with a popupbox saying: "the computer unexpectedly inexplicable, or an unexpected error has occurred. The site amenities cannot procceed. To install Windows, you will need to click ok to restart the computer. Start the installation process. ».

  What started the problem was that during the last part of the installation (after Win7 becomes usable, but above all has been installed), escape was pressed, and the computer has been used normally.

  > I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  I assume you are using a European model for laptop and so you should try it;
  -Press on F8 laptop computer power on.
  -Then choose fix my computer
  -Then Toshiba HDD Recovery.

  This should allow you to start the Toshiba HDD recovery process.

• Satellite L750D - can not find "hardware Radio switch.

  Satellite L750D (PSK36A-00U008)

  Use the KEY: "FN + F8" cannot turn on wirless, display ' Please turn on wireless communication switch.

  I check the book from top to bottom and all sides. But could not find this option.

  Please help me!

  Thank you very much!

  Are you using the original operating system preinstalled that you got with your laptop?
  Card WLAN registered and activated correctly in Device Manager?

• Satellite P850 - can't access boot options

  P850 with windows 8
  Can't access boot or bios options, I have tried all the ussual
  F12
  F2
  Delete
  ESC
  c
  function key more F12
  I tried pressed eah before turning on, I've tried everything I can think of.
  Thought really frustrated, return it to the shop

  Proceed to a complete stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  And after a reboot, press F12 to get into the boot menu.

• Can't access ITUNES Store with the new Windows 8, WHY

  Try to install ITunes on new windows 8, but not compatible with my iphone, ipod or can not access my library, any chance of refund for this barrage of Windows 8.

  Hello

  ITunes (http://www.apple.com/itunes/ ) 10.7 is compatible with Windows 8.
  You should make a backup of your library before installing Windows 8.
  http://support.Apple.com/kb/HT1382
  to restore after installing Windows 8.
  I can also confirm that the iphone, ipod and ipad work with iTunes in Windows 8.
  So, try to describe your problem in detail, if you want a solution.
  Carlos

• Can not access network drives after installation of Windows 8 Pro

  Hi all

  I have a concern with a PC in Windows 8.

  I am rebuilding a new laptop for a user. Successfully, I added to the domain and assigned privileges for the user. When I try to log on to the PC with the new user account, I can not access network drives. When I log in with my account, I am able to access the network without problem drives.

  When I'm on the user account I can see the other computers on the network as well. But for some reason I can't access network drives. Other computers on the domain are running Windows 7 Professional.Can someone help me with this?

  Thank you

  Hello

  As you are on a domain, I suggest you to post your query in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  I hope this helps.