Satellite L755 - 1 DR: WiFi weak signal even on top of router

Similar Questions

• Satellite T130 - Wlan Realtek 8191SE weak signal

  I recently started using a Satellite T130 with Realtek 8191SE Wireless LAN.

  Wireless reception is terrible.

  At home, I can't wireless reception if I go to the floor, in a room just above the router.

  In hotels, I am unable to use their wireless unless I go and sit at the reception, or a little over the top where their router.

  Update the BIOS to 2.7 and driver version is 2015.1.427.2010.

  Is there anything else I can do to improve wireless reception?

  Hello

  Usually, you can try to change some settings in Device Manager-> card WLan-> properties-> Advanced tab

  In my case (I m using Intel WiFi card) I could find a few different options. signal strength, channel, standard Wlan.
  Try to use a single standard like 802.11 B or G, try an other channels etc.

  Go to Power management and try to deactivate the energy saving for the Wan card...

• L755-154 satellite - could not get WiFi to work

  Hello

  I have a Satellite L755-154 runs a new copy of Windows 7, but I can't get the WIRELESS to work at all.

  Someone at - it a link to the drivers concerned? (Windows 7 64-bit)

  I don't see any network adapter wireless device settings? just the Ethernet connection.

  Thanks for any help.

  see you soon

  Sam

  Hello
  I have the same problem.

  I have a Satellite L755-175 runs a new copy of Windows 7 Ultimate, but I also can't seem to get the WIFI to work at all.
  I downloaded drivers from the corresponding page in the drivers for Satellite L755-175 (Windows 7 64-bit) (also tried 32 bit). But do not install drivers.

  I don't see any network adapter wireless device settings? just the Ethernet connection.

  Thanks for any help.

  see you soon

  Brian

• Satellite A300 - give up WIFI connection

  I recently bought a Satellite A300, but unfortunately it keeps down the internet WIFI connection while surfing the net.
  It's only recently, in the last 2 weeks and I did not install new software that can do this.

  I have a connection by wireless modem netgear aged 12 months which is connected to my main computer (wireless).
  I use a secure connection which needs a wep key and is compatible with Windows Vista.

  I also use this connection for my laptop from a different manufacture that I have no problem with. I also have Wifi on Wii and Xbox so I was wondering if there could be interference. Xbox Cup connection also.
  I have only 2 related both objects and they are not even in the same place or even near each other...

  When I diagnose the problem it says weak signal, but the intensity of the signal on the computer shows excellent.
  If I plug the ethernet cable then everything works fine.

  Very puzzled as to why this happens, having run checks virus on computers and nothing.
  Uninstalling the connectivity doctor, still no joy.
  All that it suggest that there is problem ISP but given that I can connect to my other laptop and desktop PC and no problems so do not know if it is...

  Can someone help, I'm not very technical and am now very mentally drained

  Thank you

  Hello!

  First of all, you must update your WLAN driver. You can find it on the Toshiba site:
  http://APS2.toshiba-tro.de/WLAN/

  He recommended to disable some options that could have an impact on the energy-saving WLAN functionality.
  In your case I would deactivate the energy saving WLAN and maybe this document option is useful for you
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Good bye

• Airport Time Capsule: Suspected of weak signal

  Hello

  I have 3 Apple wireless devices all. The main router is the ATV, followed of an Airport Extreme, extending the network and a former Airport Express, also the extension of the network. Briefly, it is a three-storey house, on the first floor of which is a daylight basement (windows and doors on three sides), then the second and third floor (all wood of the frame).

  I'm almost completely Mac/Apple-centric (my son except for the PC game), there are 6 Mac (PPC and Intel) and 4 iPhones on the printers network every day, matching, smart TVs and casual with a device visitors or 2. Generally, there is no connection problem apart from the complaints unfounded. There are a variety of El Capitan, Yosemite, Leopard, OS 9.2.1 and iOS operating systems. Computers are my MBP to 2008, two MacBooks circa 2010, 1 iMac (circa 2010), 1 lime iMac 400 has PPC G4 MDD and iPhones - 5s and 6s (2 of each).

  I studied this weak signal suspected by the search for possible answers on the internet, try to use various applications to diagnosis Wi - Fi and browse the various parameters of the airport. I was not able to "find" a smoking gun or even a reason suspected for the signal is so poor. "So poor" refers to my dissatisfaction with our signal coverage - my expectation!  It is perhaps as good as it gets and I have too wait.

  The layout has my ATC in my office, ground floor, the west wall of the House and approximately 4 ft above the ground. The AExt (from ATC) is through an open door and a flight of stairs and on the ramp (half wall). If you stretched a string directly between ATC and AExt would be 16' - 20'. The AExp bounced around, but currently it is in our gym, which is part of the structure of individual garage. The AExp is approximately 45 ' - 50' of the AExt and 65' or from the base (ATC). My goal is to explain the variety of signals.

  I'm not the most scientific. To drive off the coast, I don't understand why there are 4 WiFi signals reported. 2-5 Ghz and 2 to 2.4 Ghz. "The only basis ' creating a wireless network" is the ATC, the other two are "the extension of the network. There are 2 reported BSSIDs and I forgot how to determine who is what hdwr.

  Walk with a MB and it is Wireless Diagnostics app, it seems, most of the signal issues are explainable. One unexplained is when I get out the MB to the gym, the signal "through the roof" - it probably doubles in strength, and that's where the Express is maybe 60' of ATC. Sounds good, but why, when I go back to ATC, the fact the signal drop in half. I want to Express signal overall. I guess the Express to be the weak link, but of course does not appear like this. My main computer, the MBP, sits 15' and at glance of ATC and gets that weak signals - I guess that it could be the Airport card in the MBP, but I'd like to think not, that I have no way to test it. I'm sure that all this has to do with the 4 signals being broadcast and the differences between networks 2.4 Ghz and 5 Ghz.

  So, why is my best farthest signal from the router (ATC) and why is it the MBP of low signal (MB too), the nearest router. Oh, I have no neighbors to 500' or more. Sorry for writing a book.

  The layout has my ATC in my office, ground floor, the west wall of the House and approximately 4 ft above the ground. The AExt (from ATC) is through an open door and a flight of stairs and on the ramp (half wall). If you stretched a string directly between ATC and AExt would be 16' - 20'. The AExp bounced around, but currently it is in our gym, which is part of the structure of individual garage. The AExp is approximately 45 ' - 50' of the AExt and 65' or from the base (ATC). My goal is to explain the variety of signals.

  When you extend a wireless AirPort network using intermediate connections wireless base stations, it is important to understand how fundamentally. So please forgive me if I go to the places you already know.

  Extended wireless airport works wheel - as with the base station extend over the hub of the wheel. Each of them extending base stations would be on a spoke of the wheel. With the new 802.11ac 802.11n base stations, you can not extend linearly. For example, in your game both the extreme and the Express would be on another spoke in the wheel, step along the same spoke. Make sense?

  That said, the station of further base your Express, would have a harder time getting a signal strong enough to expand it, while extreme may not have this problem. Basically, this would explain the gap between the quality of the signal between these two base stations.

  I wrote an an airport users points to try to help to how to best place a base station that extend. It may be useful.

  To drive off the coast, I don't understand why there are 4 WiFi signals reported. 2-5 Ghz and 2 to 2.4 Ghz. "The only basis ' creating a wireless network" is the ATC, the other two are "the extension of the network. There are 2 reported BSSIDs and I forgot how to determine who is what hdwr.

  By default, each of your simultaneous dual band base stations provide actually two wireless networks; one on the 2.4 and the other on the 5 GHz bands. Base stations extending each of these repeat if they are in the range. Note that the higher frequency band (5 GHz) would have a harder time penetrating objects, such as walls, ceilings, etc. and it is basically only usable in the same room. I'm guessing what to do in distance between base stations, the extreme is able to expand both networks, but the Express (especially, if it is a model of generation 802.11n 1) extend one or the other.

  For routers to Apple, the BSSID is the MAC address wireless base station itself.

  One unexplained is when I get out the MB to the gym, the signal "through the roof" - it probably doubles in strength, and that's where the Express is maybe 60' of ATC. Sounds good, but why, when I go back to ATC, the fact the signal drop in half. I want to Express signal overall.

  To each base station that spread, the level of the signal from the base station can be high, but real bandwidth of the signal will be the same as what he receives in this place. Yes, you can see a high (full bar) signal level, its ability to transfer data will be reduced because of this limited bandwidth. The key is to place the base station that extend to a resort beach it is the extension to get the specific width of possible higher bandwidth SNR. It is covered in the tip that I quoted above.

• Satellite L755 - conflict uTorrent with youtube and radio online

  I just bought Satellite L755 - 1 M 0 a few weeks ago and put Windows 7 on it. I have problem when you look at youtube and listen to the radio online of the browser, while that download torrents with uTorrent.

  There is NO problem with slow internet, the connection is good, torrent download is slow, and others on the internet is functioning normally. But when I want to Watch youtube videos, he starts going on for 30 seconds and that it stops, once again from the beginning and it stops again and never comes until the end of the video.

  As with radio in the browser line, it works for 10 seconds, then it stops and never start again.

  When I turn to uTorrent and wait 10 seconds, when I refresh the page youtube or online radio, it works perfectly.

  On the old desktop PC, everything worked perfectly with the same windows, torrent, and online radio.

  I tried to limit the download and upload of torrent, limit the number of connections of the torrent, to use the old version of uTorrent... but nothing helps. I use WiFi at home, but even when I connect to internet with LAN cable it still the same problem.

  Any suggestion?

  > When I turn to uTorrent and wait 10 seconds, when I refresh the page youtube or online radio, it works perfectly.

  This means that it is certainly not a laptop problem.

  > There is NOT problem with slow internet, the connection is good, torrent download is slow and others on the internet is functioning normally.

  In my view, that it seems that your internet connection is overloaded

  > But when I want to Watch youtube videos, he starts going on for 30 seconds and that it stops, once again from the beginning and it stops again and never comes until the end of the video.

  That s clear... all streaming video needs to cache first if the connection is overloaded, the flow would be loaded much more slowly and so you have a few interruptions while watching the youtube

  As you said above, everything works fine the torrent Torrent disabling is your problem

• Need a Wi - Fi for Satellite L755 Manager software

  After I've upgraded to Windows 8 last year I'm confused in the face of the connection to the WiFi of my Toshiba Satellite L755, even me, I pilot last installed for Wi - Fi, but there is no software that compatible with my laptop Wi - Fi Connection Manager, I try several times to connect to Wi - Fi and it connects by chance only.

  Is there that a Wi - Fi connection for laptop Toshiba Manager software can be useful?

  In general you don't need special software for WLAN connection and it should work with Windows settings only.
  Maybe it sounds stupid now what software do you mean exactly? ConfigFree maybe?

  Wireless network adapter must be properly activated so that your computer can detect your WLAN. When you click on the WIFI symbol in the taskbar you will see listed all networks wireless detected in your area. Click on your WLAN and click on Connect. Of course you should choose option to connect automatically, so each time when the laptop detects your mobile phone WIFI connects automatically and you should have full access to the Internet.

• Satellite L755-M1M3 driver sound problem after upgrade to win 10

  Salvation;
  I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

  Inability of Toshiba to make the solution, always shocks me. !!! ???

• Satellite L755 - 1HW screen covered bulk green / missing graphics card

  Satellite L755 - 1HW
  Part number: PSK1WE 0U0009EN

  I recently bought a Satellite L755 with integrated nVidia graphics card. The screen had recently pink/green tint everything except a cm Strip flooring upstairs.

  This makes it impossible to tell the difference between the red and the black. It also has an effect of streaks on darker or lighter blocks, going up and down the screen.

  For some reason, it can detect is more the graphics card and I can't download the new drivers as long as it does not detect the card. I tried the system restore and the first time I did the color returned to normal for a short period. Since then, the question remained regardless of what efforts, I undertook to solve the problem.

  Unfortunately, after I lost the receipt, I can not simply return it. It is only around the age of 3 months and therefore should not be seen this kind of problems. Any ideas?

  Hello

  I'm not very well if it is a driver problem m more like GPU problem or display
  You can see the same symptoms on the external monitor attached to laptop?
  If Yes, then I would say that its number of graphics chip

  Even if you have lost the receipt, you should visit the dealer may be the dealer could help you in this case

• Satellite L755 - 1 c 3: Question about Ubuntu and Wi - fi card compatibility

  Hello

  I plan to buy a Toshiba Satellite l755 - 1 c 3 here in Italy, but since I am a user of Ubuntu I want to check compatibility with the wifi with her cards.
  So I have 2 questions:

  Model of card wich Atheros get? (has not been able t find on internet)
  He works with Ubuntu 11.04?

  Thanks 4 any help!

  Hello

  It s an Atheros AR9285 chip that supports 802.11bgn, the Bluetooth V3.0 + HS
  I think that it shouldn't be a big problem for Ubuntu to recognize this chip.

  Welcome them

• Satellite L755 - WLan turn on automatically

  Hi everyone;

  I just bought new laptop Toshiba Satellite L755 with Windows 7 home premium,
  Is what I am facing strange issue when I turned off the wireless FN + F8 and when I shut down the computer and turn it on after a few minutes automatically wireless switch and the red light indicating that make the question or it of normal?

  To find out, I got the laptop trying to see if that solves this problem.

  Hello

  WiFi on / off is controlled by software.
  As far as I know, the buttons FN control the Flash Card Utility, which is part of the package added value PPV (in most cases). So my first idea would be clocked a VAP.

  In addition the Wlan driver update. This is the portal Toshiba WLan containing all available wireless drivers:

  http://APS2.toshiba-tro.de/WLAN/

• By Satellite L755-17r spec meet the requirements for farming simulator game?

  Could anone look at this and advise please?
  My son bought the game for him and it worked fine far at the beginning but suddenly refused to start properly and if it isn't the game screen is empty, even if the screen moves when the controls are in a hurry.

  I don't know about the spec on graphics card so looking for some advice
  My graphics card is the Intel HD 3000, the game conditions are

  256 MB of vram
  nVidia Geforce 6800 series
  ATI radeon x 850
  S3 chrome43o gt

  My laptop model is toshiba Satellite L755-17r 4 mb ram, 620 gig and 2.1 ghz.

  I thank in advance

  Hello

  It seems that you play an online game that runs in the Internet browser window. Right?

  First of all these games have not need of high performance computers.

  Therefore the specifications of the laptop should be ok.

  I recommend the first graphics card driver update. Visit the Toshiba driver European page download the compatible driver and install the graphics card driver.

  Also I recommend that you check the different Internet browsers like Firefox, Chrome, Opera or the latest IE 9

  Welcome them

• Driver satellite L755 and Win10 media

  Sir, I am Abdul Rauf, Abu Dhabi, UNITED Arab Emirates. IAM is used for laptop Toshiba Satellite L755 - M1KQ (serial number: 6B488629W, room no.;) PSK2YE-08J016IT). Now, I'm a pilot updated Windows 10 and after 3 items not supported - Toshiba webcam-MP, Bluetooth, Microsoft Virtual WiFi Miniport Adapter driver
  Because of the above problems faced by me, I'm in a big dilemma. So I ask hereby humbly you to solve problems of this.

  Your helping me a lot and waiting for your favourable response.

  Your faithfully

  Abdul Rauf

  

  I have the same problem here!
  Please indicate when you will publish the new drivers?

• Upgrading RAM on Satellite L755

  Hello world

  I want to ask about upgrading RAM for laptops,

  I have the Toshiba Satellite L755 I want to change my 6 GB to 8 GB but I can't find as much RAM in a red circle in the picture but another number in yellow circle is same numbers.

  My question is it ok to change it, because I can't get RAM even with the exact numbers in red or yellow circle?
  [http://s10.postimg.org/qqrh22721/20120910_175838.jpg]

  Can you please send the complete model number (Satellite-L755-xxx) so I can check the exact laptop specification, just to see the details on the upgrade of RAM.

• Satellite L755-16J - problem with sound card

  I currently own a Toshiba * Satellite L755-16J * and is having some kind of trouble with the sound card, I think.

  When I bought it, it came with windows 7, I changed the Windows of windows 8 and since then the audio has been trouble me.

  The internal speakers work for a minute or two, when I play an audio file, but then stop working.
  I had been using a usb external sound card and external speakers for some time but decided to the switchback to windows 7 for the sound working again. even if I went to win 7, the sound still doesn't work.

  I am sure that the problem is not in the internal speakers because they do not work, even if it's just for a brief moment, but they work, so I think the problem is in the software instead of hardware.

  I tried to update the audio drivers but they seem to be updated as windows, pilots 'seem to work properly.

  Can anyone help?

  > even if I spent back for win 7, the sound still doesn't work.

  How did you do that?
  Have you used the Toshiba Recovery disk in order to install Win 7 or have you installed Windows 7 using the Windows 7 clean and fresh hot?

  The laptop supports the Conexant audio chip. The audio driver is available on the page of the Toshiba UE driver and where the sound chip is already recognized in Device Manager after installing the audio driver, I assume that the driver has been installed correctly.

  In this case I recommend you plug in a headset.
  In case the headset should work fine, the speakers could be affected. I mean the material. But of course it s just an idea.

  Next to the audit of the helmet, you can also check the settings in the Panel of-> sound-> the Read tab.
  Usually, the speakers should be set as default device.
  Check this option too.