Satellite L840 - failed to open the Webcam and microphone

Hello Toshiba Support Forum,

I bought the laptop Toshiba Satellite L840 on July 18, 2012 in Australia.
The laptop fails to launch the webcam when tried to start the webcam.
And she also does not detect the webcam and built-in microphone.

Since I bought it I'm not be able to detect the webcam and microphone in the laptop and use it.
Is there a way to help him?

Kind regards
Shree Ram Aryal

Hello

Have you tried to reinstall the webcam software?
Usually, you should find the software/driver of webcam for your Australian model on the Toshiba driver page to THE.

Recommend doing this!

Tags: Toshiba

Similar Questions

  • Satellite P300D: Christophe sound using the webcam and MSN

    Hello

    I am very disappointed.
    I have a P300D - 11M. When I use MSN the webcam and sound disappear after a few moments.

    I phoned the seller but don' t find and always telling me to put the system again.

    I have the camera chicony and people and the realtek wireless card said that there is compatibility issue with msn.

    Do you have an idea about this problem?

    Hello

    Has your factory for laptop (Vista preinstalled original) settings?
    Are the cam and microphone set up in MSN?

    It is not easy to write on these issues. The fact is that several people have reported similar topic here in this forum. If you have time go to the advanced search options and try to find the wires on his and MSN.

  • Re: Satellite L350-170 - Question about the parameters of the webcam and microphone

    Hello

    I would like to know the resolution of the webcam in my laptop because it shows preety bad out put. Also, where is the built-in microphone located? I would also like to know the screen brightness settings. How can I register my laptop? kindly help

    Since it is my computer opportunity, is a software that allows to detect the settings and confirm everything? My Product Details are as below.
    Return to the support home page
    Satellite L350-170 part number switch models: PSLD8E-00D008EN main features - processor Intel® Pentium® Dual-Core
    -Genuine Windows Vista® Edition Home Premium (pre-installed, Toshiba-HDD recovery)
    -DVD - RW SuperMulti drive (Double Layer)
    -2048 MB (1024 + 1024) DDR RAM (800 MHz)
    -17 "Widescreen TruBrite® XGA (1440 x 900) display high brightness

    Help, please.

    Hi CBX_tintin85,

    I think you should check this Toshiba document:
    [How to change the settings for the built-in webcam If the image is very dark or black | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

    In addition, the microphone is located on near the microphone because it s part of the webcam.

    About the quality of the image of the webcam you can also try reinstalling the driver of the webcam of the Web from Toshiba site.

  • Pavilion dv6 problem with webcam and microphone

    Hello
    I have a HP Pavilion dv6-6156ea, which is a little more than a month.  It runs Windows 7 Home Premium.
    Today, tried to use the webcam and microphone for the first time, a Skype call, but none of them does not seem to work.
    The webcam is not displayed in Device Manager, but the microphone is.
    When I opened Cyberlink Youcam, it does not recognize that there is an internal webcam.
    What should I do to activate the microphone and the cam?

    I followed the link below and follow the instructions.  But the webcam is not displayed in Device Manager.

    http://support.HP.com/us-en/document/c02452221

    Because is not find the device, I don't know how to update the drivers.

    I don't know how to solve the problem with the microphone.  I don't know if these things are likely to be associated.

    Any help appreciated

    Thank you

    Feel a little silly answering myself, but no one responded and I thought it is best to share what I found out.

    The webcam was defective, straight out of the box.

    And the microphone is connected to these features, but uses a different driver - if your microphone works, it could be a sign that your problem is with the driver for the cam.

    I bought the PC world a month ago, so there was although it is very busy.  It was the second faulty webcam in HP they had returned today - most early was a dv7.  There was no problem with replace - they took a glance, considered to be the installation of the drivers on a disc, but when it was not displayed in Device Manager and the microphone works not more, they knew right away.

    It really shows control of very poor quality of Hewlett-Packard.  It's a shame that in the first weeks, I was really happy with this model, but realistically, now I know that this is what looks like their QC, when my company needs its next piece I'll go with anything other than HP.

  • Firefox continues to try to update each time I open the browser, and it then puts a message saying update failed. It does this on both of my computers. The most recent version, the other does not. How can I stop Firefox to do this?

    Firefox continues to try to update each time I open the browser, and it then puts a message saying update failed. It does this on both of my computers. We already have the latest version, the other does not. How can I stop Firefox to do this?

    If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.

    Download a new copy of Firefox and save the file to the desktop.

    Uninstall your current version of Firefox, if possible.

    • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data, because all profile files will be deleted.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • Problems with webcam and microphone on the Satellite with Windows 7

    Hello
    I installed Windows 7 on my Toshiba Satellite and all of a sudden the webcam and the microphone does not work.
    I tried to find the appropriate drivers, but I can't seem to find.

    Could someone please help?

    Best regards
    Teresa

    Hello

    The webcam software is designed by Chicony.
    This model of laptop s independent and, therefore, the use of the webcam software that has been released for other models of laptops may not be a problem.

    I recommend you the driver for Toshiba Satellite L500 series area.
    There you can download the drivers for Win 7 32 bit and 64 bit OS.

    Welcome them

  • not trying to open the CC and the 10 Winodws update shows up but it confuses any way around this and just use what I downloaded already... I pressed download and he got 44 percent, then failed. so idk if its because I have windows 7 or what. everyone:

    not trying to open the CC and the 10 Windows Update shows up but it confuses any way around this and just use what I downloaded already... I pressed download and he got 44 percent, then failed. so idk if its because I have windows 7 or what. does anyone have a solution? Please and thank you!

    Thanks I thought that already, it was judt does not install, but I managed to do the work. Thank you very much

  • Toshiba Satellite 5200 - how to open the case?

    Hello

    I have a Toshiba portable computer Satellite 5200 903.
    Here's my problem:

    My laptop is getting very hot, even it is idling. This is because the cooler got very dirty over time. And if the case/CPU-fan runs all the time, but no air comes out there.
    Now, I would open the case and clean the cooler. But for some reason, it is not possible. I removed all the screws in the back, in the Bay of battery and the hard drive Bay, but it's not working. So I think there must be some other screws, maybe next to the powerbutton on the top under a blanket. But I don't know how to remove this cover, without breaking.
    Or maybe I'm totally wrong and missed something else.
    I hope someone can help me.

    And sorry for my bad English.

    Thanks in advance.

    schlady

    Hello

    in my expierence the screws on each NB arranged differently and I would disadvice you open the NB to yours!

    In my opinion, it will be the best way to the NB to a Toshiba Service partner. They have the kowledge how to open each specific model and change the FAN!

    This will cost money, but you can be sure that it works after the check-up!

    You can find the following Service partner
    https://EU.computers.Toshiba-Europe.com - Support & download and find an authorized Service partner!

    Goodbye, Sam

  • Failed to open the Works document after Windows Update

    Original title: failed to open the works document, after a month of update.__9 of configuration of microsoft of 350 pages. Help!

    no change...

    Hi SILLIVEN,.

    1. what exactly happens when you open the works document?
    2. do you get an error message?

    Try these steps and check the result.
    Step 1: Update remove recently installed
    a. see remove an update
    b. Once you have removed the update, restart the computer.
    c. open work document and check if the problem persists.

    Step 2: If the problem does not persist after the removal of the update, try to install updates on hold by turning off all non-Microsoft programs and check the result. To do this, try the following steps:
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
    c. install the updates. See the updates Windows Installer
    d. Once you have installed the updates, the article, follow "step 7: reset the computer to start as usual.
    e. check if the problem persists.

    For further assistance on Microsoft Works, please post your request here: http://www.microsoft.com/products/works/support.mspx

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

    Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

    See this for help...

    http://support.Microsoft.com/default.aspx/KB/290684 MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

  • Failed to open the Mark II Canon 1DX Raw files in Photoshop CC [double wire: locked]

    I sent a letter this morning and you don't know where to go to nto am see if there is any help. It is extremely urgent that I'm leaving on a month long photographic safarin in Central Africa and have a huge problem.

    This is what is wrong. I have a new Canon mark 11 1DX and closed format in camera raw. When I download pictures from my menory in CC card I am advised the following. COULD NOT COMPLETE THE COMMAND BECAUSE THE FILE APPEARS TO BE A MODEL OF CAMERA THAT IS NOT SUPPORTED BY THE INSTALLED VERSION OF CAMERA RAW.

    Go to the web I gives me a list of all available cameras and my camera needs Adobe camera 9.6. I have this download on my laptop, and it won't work. Going tomthe UPDATE seevction in the interface of Photoshop Photoshop CC me to be updated in ertthing.

    Can someone help please. My email address is [personal information deleted by Moderator] please help me.

    Concerning

    John

    [Left Adobe forum at the general level, compliant Lounge for a more specific product - Mod support forum]

    This has been asked and replied to your other thread

    Failed to open the Mark II Canon 1DX Raw files in Photoshop CC [was: John van Wijk]

  • My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

    My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

    It is a catalog that you created on your computer, or coming from another computer?

    If it is one that has been created on your computer, you can search your computer to see if you have two different versions of Lightroom installed. If so, then you want to open the new version of Lightroom by double-clicking its icon, and then you should be able to open the catalog.

  • Failed to open the trial of Lightroom 4 on my PC

    Failed to open the trial of Lightroom 4 on my PC.

    I discovered it. Double-click and open it with others then go to applications and click on lightroom and it opens... great so simple, but they should have told us... .hope that works for you also.  Lynn

  • Adobe media encoder cs5.5 fails to open the queue for the first export

    Adobe media encoder cs5.5 fails to open the queue when first CS5.5 exporting. I use an Mpeg2 normative action and choosing export immediate option works very well. After having chosen the option of queue, Adobe media encoder will show its splash screen... Then nothing. Does anyone else have this problem?

    Premeiere CS5.5

    ASUS Board

    CORE I5 2400 K

    16 GB of Ram

    NVIDIA GTX 560Ti (software hack)

    2 TB internal dedicated video player

    Try trashing the preferences of the user for media encode.  It is usually the cause of this type of problem.

  • I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

    I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

    You need to activate the phone. There is nothing that the phone can not be activated.

Maybe you are looking for