Satellite L850 running win 8 - can't get BT working

Similar Questions

• Satellite L500/01F and Win7 - can't get the working FN keys

  I have a Satellite L500/01F and performed a clean installation of windows 7.
  All right, except that I can't get the FN keys work.

  Is there a certain driver I can download for this problem? Thank you

  Have you installed package of added value for Win7 offered for your laptop model?

• Satellite C850-B906 - question RFBUS - can't get BT working

  I have a Satellite C850-B906 and I have a problem with the driver RFBUS ana, I can not able to run the bluetooth

  How can I solve this problem?

  Thanks to you all

  and what driver problems you have exactly?

  What system do you use?

  Laptop seems to support Realtek Wlan / BT combo card.
  If you are using Windows 7, you must install Realtek BT filter package before installing the battery Toshiba BT.

• My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista.

  Original title: internet telephone

  My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista

  Hello

  1. What is the brand and model of the phone and Bluetooth adapter?
  2. what exactly happens when you access the internet via your phone?

  Please provide more information. This will help us assist you better.

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Also, please take a look at the below items that might help you.

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• How can I get Jabber works on iPad without CUCM?

  Nice day

  Question: How can I get Jabber works on iPad with TMS and VCS instead of CUCM?

  Material: TMS 14.5 with VCSC/VCSE X8.2.1 and TMSPE 1.0

  Rarely Jabber is used on an iPad here for the last time we tested, it was probably more than a year and it worked great. I have a new request if and when you go to the store I notice the previous product working is no longer available and has changed for Cisco Jabber 11.0.3. I feel that this only works with CUCM.

  Can someone tell me if it is possible to get this new application running without CUCM and rather through VCS /TMS? I tested a variety of attempts to connect to the new application and they are all lead to not being able to find a server. Cisco documentation is a bit complicated on this issue so I'm hoping someone here might have some experience with this.

  Any help is greatly appreciated.

  Thank you
  Mike

  The customer you are looking for is 'Cisco Jabber Video for iPad', which is what Jamie refers in its response.

  However, the Jabber video for iPad is therefore more available for download, as it's end-of-sale (eos-eol-notice-c51-732786), this is because Apple requires that all their applications must be 64-bit, and it was not possible to update Jabber video application as 32-bit based.  In addition, in the case where you have the video Jabber for telepresence (Movi) customer is also EOS (eos-eol-notice-c51-732787).

  Replacement for both video Jabber clients products are Cisco Jabber client (that you mention at the end of your message) with CUCM only, as call manager is management that moves to Cisco for call control.

• I use the free trial version. I try to print an Applitrack online application. He said that I should print preview it.  It does not work.  How can I get it works. Help.  I'm afraid that my request will be not visible to employers.

  I use the free trial version. I try to print an Applitrack online application. He said that I should print preview it.  It does not work.  How can I get it works. Help.  I'm afraid that my request will be not visible to employers.

  If it is an Acrobat, who never had a print preview, because the PDF screen is an overview of what the prints.

• my cloud is empty, NO photoshop. How can I get my work when I can't open photshop?

  my cloud is empty, NO photoshop. How can I get my work when I can't open photoshop?

  have you installed the application from office cc, https://creative.adobe.com/products/creative-cloud

  If so, when you open it you will see a white screen?  If so,.

  First, close your office cc application.

  then, rename the opm.db file by:

  Navigate to the OOBE folder.

  Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE

  Mac OS: /users/folder/Library/Application Support / Adobe / OOBE

  and rename the file opm.db in opm_old.db, for example

  Finally, launch your cc desktop application.

  If this does not work: https://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

• The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo

  The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo

  Hello

  In order to download Adobe Photoshop, you need to download the desktop app creative cloud first.

  You can please apps download Adobe Creative Cloud | Adobe Creative Cloud free trial

  After downloading the desktop application, you can download photoshop through it.

  Kind regards

  Sandrine

• Re: Satellite L850-1EK: win 7 - cannot install the driver for Wifi

  Hello! I hope someone can help!

  Bought a reconditioned model Toshiba L850-1EK of PC World in Novemember - its been great! so much better than my old netbook! Lighter too!

  However, due to a media blank Superhub that keeps falling speed wifi, I remembered something that worked on my old laptop - uninstall the wifi adapter in the Device Manager and have windows "find" and reinstall/update driver. This, you will agree, was a mistake.

  Annoyingly, the driver was not installed correctly (the popup box said this) and each time I try another driver even if Toshiba, Atheros or Google, none will work correctly - if she is completely installed, there is still no wifi (impossible to find networks - as if the wifi is turned off).

  Also tried activating / disabling the wifi enabled, deactivation / activation of the adapter directly, connect the network cable to find other versions of the driver (as above), even the system restore did not work as he could not find a file, then it did not restore.

  Is there a driver especially L850 ships with? At my wit's end! The driver gets up in what concerns the Atheros AR9485WB-EG

  Plans currently do a full backup/restore - a system of image recovery should replace all good, right? Back at the factory-fresh, with working wifi?

  Would have done this if my external drive was big enough for a full system image, or if my LaCie ethernet disk had USB... sigh.

  If anyone can help, let me know!
  Thanks for reading,
  Coz.
  tendermonster (at) gmail (dot) com

  Your WiFi chip should be Atheros b/g/n WB225 BT support also.
  If you need an Atheros WLan card driver.

  Visit the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?

  Choose:
  Satellite
  Satellite L series
  Satellite L850
  PSKDGE

  Check now the Atheros WLan drivers available

  By the way: what Windows system do you use?

• Re: Satellite L300 - 18 d - how can I get a Vista restore disk?

  Hello world

  My laptop (Satellite L300 - 18 d) has been seriously infected by viruses, all corrupt. I need to resinstall Vista but do not have the restore disc. After searching around, I managd to download a restore disk of some sites, but when I used this disc, it gave me an error code which meant the product key was wrong. I used the product key from the bottom of the laptop (I trust this is an OEM). So I guess I need a restore disk that works with my OEM product key.

  How can I get the restore disc that will work with my OEM license?

  Also, I tried to install XP on my laptop, but it kept giving me a message saying that it could not detect the hard drive, there is nothing wrong with the hard drive, I tested it on another laptop. Is there an any obstacle o install XP on this laptop that came with Vista of origin. Is there a security Messure somewhere that I collapsed to install XP?

  Thanks in advance

  Hello

  The original Toshiba recovery disc can be purchased here:
  https://backupmedia.Toshiba.EU/landing.aspx

  It s not expensive, as far as I know it s about 30 euros

• Satellite A200 - 1 M 4: can I get Windows Vista separately?

  Hello

  When I install the product recovery CD, it installs Windows Vista and many programs that I don't need.
  I just want to install Windows Vista (even excluding pilots).
  So, can I get the installer of Windows Vista (Home Premium) separately?

  Thank you

  Hello

  There are no separately installation program. You are not alone with this opinion and no you don't have to use any installed stuff. I remove also all the stuff, I didn't need.

  Install the OS by using the recovery CD and then download all the updates from Microsoft to ensure that everything is up to date and remove all the stuff that you don't need. Believe me I do the same.

  Just for example - I have a satellite that comes with Windows XP Home edition and I did follow:
  1. installed OS using supplied recovery DVDs
  2 installed all updates from Microsoft
  3 deleted applications, I didn't need
  4. install all the applications I need for work (office, Nero and so on)
  5 installed Norton Ghost
  6 created my own recovery image

  Now I can reinstall my OS and after 30 minutes, everything is there. In the case of some virus or any other strange question, I install new OS (on the C partition). All the data saved on the D partition are still there and can be used after installation of the image.

• Compaq nc6400 upgraded xp to win 7 can not get the fingerprint reader to work

  I have upgraded xp to win 7, as we will have to do, but can't get the fingerprint reader to work. It appears in the devices that there is one on the machine. I downloaded the drivers for Vista, but they got nowhere.  Read in many places as Vista drivers will work but I seem to need more than that. Any clue?  Thank you!!!

  Hello:

  Yes, for Vista fingerprint reader driver is the only one available, but you must install the software HP protect Manager security tools for Windows 7 from the model which succeeded the nc6400, who was the 6910p.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_77198_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You must also use the W7 driver quick launch buttons.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_78740_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If your computer laptop bluetooth, you need the W7 bluetooth software and driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76382_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  And you can use the version of W7 HP wireless assistant software.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76368_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can also read the manual tools security protect manager, so you can understand how to use the fingerprint reader.

  http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c00881344-7%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• NB100: How can I get ACPI working under XP

  Hello world

  I wonder how I can get ACPI working under XP.
  When I enable it in the BIOS, Windows will not start... Should I load the drivers during the installation of Windows XP? That would lead me to my next problem, because the command line switch - one for the extraction of the driver does not work... Does not extract the files either.

  Or y at - there a way to add ACPI to my XP install is already running (the BIOS ACPI option is currently set to "compatibility"?

  Thanks in advance!

  As far as I know before enabling ACPI in the BIOS, you must remove the standard PC driver in Device Manager and install the ACPI driver.
  Then go into the BIOS, turn it on and should start Windows.

  In the Microsoft Knowledge Base, I found an article on the ACPI Compatibility:
  http://support.Microsoft.com/kb/314088

• Satellite L850 - after reset of Win8 Port HDMI stopped working

  Hello
  I did a reset on my Windows laptop, 8 3 hours ago, but after that my HDMI Port no longer works correctly. I have video card was last updated. To be exact, whenever I plug my HDMI to my laptop that my screen keeps flickering except if I unplug the HDMI cable. THX

  Model: Satellite L850 PSKG6A-00R00H

  > I did a reset on my Windows laptop, 8...
  You have reinstalled original Win8 recovery image?
  Can you see Office on an external device when you switch to the HDMI option only?