Satellite L855-149 - migration Windows 8 to new SSD, including recovery partitions

Similar Questions

• Re: Satellite L855-149 primer not, he keeps making a hard cock

  Can someone please help?
  My Toshiba Satellite L855-149 primer not Windows or same boot a disc to install a new copy of windows 7. He keeps making a firm hard down when trying to load the screen of windows 7. It will only start in safe mode.

  Its a little strange... my head made shipwreck.
  Anyone had this same problem?
  Help, please

  As I see you have tested on power supply battery. The same thing happens on the power supply?

  Anyway, this issue is for the service then I recommend strongly to contact the nearest Toshiba service provider and ask for help. In my opinion, these questions it's that no much you can do about it.

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Wanted: HDD Fried, need to install Windows on the new SSD

  My HARD drive on the flat because of a power surge. When I called HP Customer Service, they said I could get a USB one of recovery from any Windows computer, and then install Windows from USB to any new HDD or SSD.

  Now, when I try to install Windows on my new SSD clean or Virgin USB 8, it says that the partition is missing.

  How can I install Windows 8 on a whole new SSD?

  Thank you.

  Hello

  You can fallow as follows

  Step 1: Prepare the Installation

• Reinstall Windows 7 on new SSD after failure of hard disk, damaged, incomplete product key

  I have a HP Pavilion.  The HARD drive recently failed completely, no possibility to recover data at the moment.  I ordered a set of HP recovery disks, but they seek the recovery on the HARD drive partition; There is no such partition that I replaced the HARD original with a new SSD drive.  To make things worse, the place that HP has chosen to put the Microsoft product key sticker resulted in the product being partially faded key.

  So, to summarize: HP not Pavilion with a corrupt OEM HDD and so far no data recovery possible. a new SSD with no partitions on this subject; a set of recovery disks from HP that don't just work; a sticker with the product key with the first two digits of the product key (as well as some of the barcode, etc.) rubbed off because they have chosen to place the sticker on the bottom of a working computer instead of, say, under the battery, it can be protected.

  If someone in the community has a suggestion as to how to install Win 7 (must be 7 on this system, cannot be an iteration of 8 or 10) from scratch, without having to buy it and with a corrupt OEM disc and a partial product key, I'd love to hear it.  Maybe it's time to install Debian on it?

  Ahh, this is the crux of the problem... the bootmgr is missing.

  To restore the windows off the factory restore DVD, you must configure the BIOS to use the DVD drive as the primary boot device. The machine will then start on the first DVD, and you will not get the above message.

• Satellite L855-149 - I want to reinstall Windows OS

  Does anyone know how to reinstall the windows 8 which is preinstalled on my laptop please?

  Is there somewhere that I have to contact to get a Windows install disc? I'm guessing / hoping that Toshiba can help?

  Just to be clear: I completely crushed the windows 8 OS my L855-149 is pre-installed with. I can't update / reinstall from within windows 8, windows because 8 is no longer on my hard drive. I wonder how / if I can reinstall the OEM of Win8 version again.

  Help, please. Thank you

  Green Giant HIE

  have you totally formatted your hard drive? If Yes can help you
  But if just crushed victory directories, you maybe can't try your drive hard thickness of mounting on another computer as a second hd and take look on her
  you could do an installarion CD or DVD? or it fix?
  JYB

• Satellite L855-149 = 10.8V for 11.1V battery replacement

  Hello everyone.

  My battery (a 10.8V / 4200mAh) died long enough and hold no charge.

  Seeing L855-149 is a product that is abandoned, it took some time to find a replacement battery (that the store that I bought the laptop would pay for).

  The replacement is a 11.1V / 5700mAh battery.
  The two are Li - ion.

  Can I put the new battery in my laptop?
  Or is he not get enough power to load and may not be very good?

  Thank you

  Josh

  Hello

  I discovered that different batteries are compatible.
  This series supports as well as the PABAS260 PA5024U-1BRS
  The voltage may vary between 10, 8V and 11, 1V

• Which Blu - ray drive would be compatible for Satellite L855-149

  Hello

  I'm a L855-149 next week but I want to put a blu ray player (preferably a writer) in the machine, instead of the DVD, it is bundled with.

  Can someone tell me what will fit please?

  Thank you
  Mick

  Hello

  However, I know that this info is in the manual (page 11)
  Compatible Blu - ray players are:

  Drive Blu - ray Panasonic combo UJ160
  Panasonic UJ260 Blu - ray burner

  Toshiba TS-LB23D Blu - ray Combo drive
  Blu - ray Toshiba writer SN-506AF

  Hitachi CT40F Combo drive
  Engraver Hitachi BT - 20F

• How to migrate Windows 8.1 for SSD the SATA drive of 1 TB on Alienware X 51 R2

  Hello

  I installed a 240 GB SSD in my new Alienware X 51 R2 desktop PC.  It is formatted and accessible within the OS Windows 8.1 at the current address.  I want to migrate OS applications and factory to the new SSD.

  Any advice?

  What I think I do below:

  I have saved everything, created exotic images of system using premium respawn, etc..  I made a bootable CD of Alienware s/w.

  I assumed that I only need to reboot from bootable CD or USB, choose the SSD as drive and choose restore from USB to recover the OS + Apps, correct?

  I have to change the boot sequence in the BIOS or something...?

  Request of forum before I go ahead and take the leap!

  THX,

  Chris.

  Hey Chris,

  abfifg gives good advice (although his link is broken for me, not sure what he was pointing to).  Cloning is certainly the best way to go.  Personally I use Acronis True Image for years & it has been easier for me.  I cloned my Alienware 13 500 GB hard drive to a 240GB SSD, then back to a 480 GB SSD.  Intelligently, it can migrate & adjust partition of a disk of larger size and a smaller without problem.  It is not free, but it's worth it in my opinion.  There are other free options out there, but I never got none of them work well.

  I hope this helps!
  ~ Jim

• Re: Portégé R700 - how to install Windows 7 on new SSD?

  Hello!

  I want to change my HDD in Toshiba Portege R700 to SSD. How to install Windows 7 on this new SSD? I don't have any Windows installation disc.

  Or that it will be possible to move the partition of the old HDD to new SSD (using Acronis, I could move the partition on the new HARD drive)?

  I've heard of partition offset and this SSD block should be the same as FAT cluster (the same alignment).

  All advice? (I know should I defragment my HARD drive before moving :))

  Hey Buddy,

  > I do not have any Windows installation disc.
  Create the Toshiba recovery disc as mentioned in the manual of the user before you exchange the disc, then you have a Setup disk. The Toshiba recovery disc will restore parameters of the box with all the drivers and tools. It can be used on each disc and how many times you want.

  After this change the drive and start the Toshiba recovery disc. Follow the instructions on the screen and everything will be installed.

  Check this box!

• My Satellite L850-18 t will support the new SSD?

  Hello

  I am seriously thinking to buy the new SSD which is SATA III. Currently, I have Toshiba Satellite L850-18 t, European model. And I think that (although that is quite difficult to get information) that the current HARD disk is SATA I.

  My question is, will the new SSD work correctly, it will take all the benefits (write and read speed) if I install it on the laptop? And if not, what SATA SSD do you recommend?

  I really need to empty it.

  Best regards
  Luka

  Yes, your Toshiba laptop support SSD. I have older machines, and there is no problem with SSDS.
  This is not complicated, you think it is.
  Check prices and buy one that suits.

  I can recommend brands like Toshiba, Samsung or Kingston. More info on SSD Toshiba you can find on http://storage.toshiba.eu/cms/en/index.html

  A friend of mine uses Samsung 840 Series SSD of base and it works perfectly. The new SSD, you can install original recovery image and start using your machine with factory again.

• Presario CQ61-110SL: upgrade for laptop Presario CQ61-110SL from XP to Windows 7 with new SSD EVO 840

  In fact on Presario CQ61-110SLI I have XP installed the Vista of origin instead.

  Now I want to upgrade to Windows 7 and contestually get a new SSD Samsung 840 rather original EVO... What is the correct procedure?

  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  There is no procedure to upgrade from XP to Win 7, it would be clean installation.

  1. place the SSD drive in the machine instead of the HARD disk

  2. start the installation of Win 7 disc to install Win 7 (best x 64 edition)

  3 install the drivers of the machine, you can download from >here<

  Windows 7 is optimized to work with SSD, there will be no problem.

  If you have important data on your old HDD, you can either save it before (on external support, USB key, Cloud solution, etc.)  or after it (via a USB cable plugged into the laptop as external drive). This is also an option to transfer data.

  Please, let me know if you have any other questions. Happy holidays!

• Upgrade of Windows 8 the new SSD

  I just bought a new SSD & downloaded the upgrade of Windows 8 to replace my old XP legit.

  My intention is to install the Windows 8 upgrade on the new SSD.
  Could someone guide me?

  You should post and ask hep in forum Windows 8, it is for Windows XP.

  John

• HP Recovery Manager - recover Windows 8 to new ssd

  Hello

  I want to build in an additional ssd to my desktop HP Pavilion 500-035ed. I bought the desktop computer with Windows 8 is installed.

  Later, I created a d-partition for my data. Currently 8.1 for Windows has been installed on the c partition so my data on the d partition on the same hard drive.

  When I do a recovery with the HP Recovery Manager:

  • can I select the new ssd for the recovery of the W8? Or will be installed on the original c drive W8?
  • can I connect volume c: to the new ssd?
  • will be d: partition (containing my data) stay in place?

  Thanks in advance.

  S.J. Westra

  Hi again,

  Disabling the drive HARD and then recover with the recovery HP for the SSD disks worked fine.

  Now upgraded to W8.1 and then I activate the HARD disk to make the data reader.

  Thank you for your good recommendations!

  Kind regards

  SJW

• Activation of windows on a new SSD after upgrade to a HARD drive.

  I just bought a new SSD to replace my old HDD and load with windows 7, I want to activate windows using my old activation code so that windows is activated on my new SSD and then use the disk HARD just for storage, but when I try to use the code, he said that the code is not valid How can I activate my windows with my old activation code?

  Have you tried to restart by phone?
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us