Satellite L875 - 10g - software webcam could not be initialized

Similar Questions

• Satellite L650 - 10 M - webcam could not be initialized

  s my computer laptop integrated webcam has not started for 5 weeks... .i heard someone as I have the same problem with this model...

  I can't find my webcam on the Device Manager

  Here are a few questions
  (1) is a common problem on this model?
  (2) IS it a software issue or a hardware failure?

  BTW, I took the following measures
  (1) I downloaded the driver for the webcam on the toshiba site, but the result is the same
  (2) then I tried to re install my windows 7 using the recovery disc and the result is always the same
  (3) approached the service neighbor provider, but they responded that there is no support for this model... warranty and services applicable only in EMEA and so no support for this laptop here in my hometown the India...
  So I plan to send my laptop in the Middle East where can I get support for this laptop.since it is a rather difficult task to move the laptop to India the boys to UNITED Arab Emirates please gimme an opinion.
  If it's a hardware problem, it is essential to send me my laptop... If else a software problem it is very easy to solve without my laptop\ grind
  SO any suggestions on this matter will be highly appreciated

  Best way to test the operation of the equipment is to check with the original Toshiba recovery image but I see, you did already.
  Then, the next step should be the service of Toshiba control.

  If there is no possibility to send the laptop in the country of purchase it will definitely be the right decision. This can be checked and repaired, if necessary. Everything will be done free and guarantee will cover the repair costs.

• Sorry, scanner could not be initialized. (Scanner not found.)

  I use Mac OS X version 10.9.2 and HP all in one Officejet J6480.  The all-in-one is able to print but not scan.  Here is the error message.    None of your above worked for me.  Either you are the reference to a different version of the operating system Mac or another HP printer.  What would you recommend for my Mac and a printer?  Thank you.

  Sorry, scanner could not be initialized.
  (Scanner not found.)

  Hi JeanneDave,

  Thank you for visiting the Forums from the HP Support! I understand since the upgrade of the OS to 10.9 Mavericks you get an error "sorry scanner could not be initialized" with your HP Officejet J6480. After some research, there is no complete abailable features of software and drivers for the J6480 JO, that said that the printer would have been installed using the Apple updates. To get a better understanding of take a look below:

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  Now, that being said, this means not you will not be able to scan just average there are a few different options, then you can use to see here to learn how to scan with or without HP software: how Scan: OS X v10.9

  I hope this helps!

  Thanks again,

• Windows mail did not start because MSOR. DLL could not be initialized

  After a number of updates have been installed, by computer could not restart automatically. When he did re - start, windows mail: could not be started.initialize junk filtering. Your computer may be in memory or the disk is full (0 x 80070002).

  When I press OK, I get: windows mail did not start because MSOR. DLL could not be initialized

  Hello

  What is MSOR. DLL or file MSOE. DLL?

  Perform the steps mentioned below and see if the problem resolves.
  a: Close Windows Mail.
  b: click on Start -run - type regedit and click OK
  c: Navigate to this key
  HKEY_CURRENT_USER-Software-Microsoft-Windows Mail
  d: right-click on that key / export / save under / where you want (with a. Reg)

  e: return this button again.
  f: Position yourself above and then do a right click and delete
  g: Close the registry editor
  h: restart the computer

  Registry warning.
  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope that helps

• Cannot open windows messaging because initialize junk filter MSOE. DLL could not be initialized

  Original title: initialize the MSOE junk e-mail filter. DLL could not be initialized

  cannot open windows mail

  Hi CyndiJackson,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Users have fixed similar problem by following the steps below:

  (a) click Start, type regedit in the search box

  (b) then go to this registry key

  (c) a HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

  (d) and right-click on it and choose export to back it up.

  (e) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Scanner could not be initialized

  I work on a macbook. I have a HP Photosmart C6180 all-in-one. I run Mac OS X 10.5.8. My printer is mounted wireless via Airport Extreme wireless network. My software and drivers are up to date for all of the foregoing.

  When I try to analyze what I get:

  Error

  Sorry, scanner could not be initialized.

  (An error occurred communicating with the scanner).

  This includes the launch via the software on my laptop HP and the menu scan on the C6180.

  Suggestions? I have tried to remove the HP software completely, remove the network printer and then reinstall them all.

  If you still have the HP software for pre - 10.6 Snow Leopard on your Mac, you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• OSX 10.5.8 & J6480... Sorry, scanner could not be initialized

  After several years of use of the scanner without problem, I can not scan documents on my HP J6480.  I'm on OSX 10.5.8

  I insert the document into the scanner J6480, my computer detects its presence and jumps to the top of the HP Device Manager window. However, when I click to scan, the program runs for a while and returns the message:

  Sorry, scanner could not be initialized.

  (Scanner not found)

  I suspect that what follows is related to the same problem. While trying to solve the problems of the control panel of the printer, I received the following message:

  The selected URL is: file:///Library/Documentation/Help/Hewlett-Packard/Context_Help/OJ_J6400/c_TROUBLESHOOTING

  Download the latest version of the software for your printer from Driver link request at the top of this page.  You may need to reload the software HP

• googlegroup mail receives an error "msoe.dll could not be initialized.

  I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

  I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

  Sorry, but the info was so 'goop gobbly' for me.  Y at - it somewhere that I can download the msoe.dll?

  While you might be able to, two points...

  (1) not a safe idea.  Microsoft does not offer it more (they do not support OE6) and nowhere else - you take your chances.

  (2) most important - the file is not likely your problem.  Something else is probably causing this message.

  You may need to remove (I suggest renaming it to RECORDS. OLD personally) RECORDS. DBX file.  If Folders.dbx is damaged, OE often stops displaying the files to the existing *.dbx files, and sometimes OE will simply refuse to start. Also a bloated Folders.dbx can OE run very slowly. These two problems can be repaired by closing OE and deleting Folders.dbx. Understand although you will lose the mail directory structure, all the discussion lists and all synchronization options and this message rules will probably have to be edited

  There is another option where you could not lose the folder structure (will not be rebuilt) because you are going to import it from a BACKUP of everything what you do by renaming the whole store folder before you rebuild everything in OE - but I thought it would be more simple.

  C:\Documents and Settings\[your username]\Application Data\Identities\{...} \Microsoft\Outlook express

  (The usual location for the file.)

• MSOE. DLL could not be initialized

  I've recently compacted my emails in OE express and can't open my OE.  I get the message "OE could not be started.  The application could not open the OE message store.  Your computer may be out of memory or your disk is full.  For more assistance, contact Microsoft support.  (Ox800C013B).  Outlook Express could not be started because MSOE. DLL could not be initialized.

  However, I read on another forum, and in trying to fix it, I can't find the OE message store folder.  Previously, I required a password for my OE.  I have compacted my emails to my primary identity and began to receive the "file MSOE. "DLL cannot be initialized... disc is full or not out of memory" message.  I discovered that I could connect to another OE identity.  I logged in the email of alternative identity, then trying to fix the main identity (which I just can't get in) I unchecked password required on the main identity.  My email is configured to log on as an identity main so now I can't sign off another identity to perform your instructions "with OE closed."  What should I do?

  If the solution I posted in response to the same question here does not help:
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/7ba8cb7a-6d25-4C24-A128-09502093b370/

  Then, start here.

  When OE crashes or won't start
  http://www.insideoe.com/problems/errors.htm#crash

  Bruce Hagen ~ MS - MVP [Mail]

• I moved my windows mail contacts place and now I can't find them. I get the message the file MSOE. DLL could not be initialized. Windows Mail does not open.

  I was exploring the information about "move your files and user files to another partition" I'm a little short on space.   I chose the location tab in my Contacts Properties window to have a look at the possibilities of some of my folders move to another partition on my computer.   However, I clicked obviously wrong, and now I got a message that the file MSOE. DLL could not be initialized.   I tried the system restore, but no restore points are available to me before today.  Are there jobs that I can do?

  Under your username must be a Contacts folder.   If there is a step, and then either move the new Contacts folder to where he was, or create a new folder under the user name, and then see if it works then.  So if you have a username of 'Heather' contacts should be under C:\Users\Heather\Contacts.  Try and then see if it works very well.  Otherwise, you will need to create a new user and then try to get this to work.

  Steve

• LR 6 Installer could not be initialized (Mac)

  Hi, try to translate from the french, the error message I got when trying to install on my Mac Book Air LR6

  "Setup could not be initialized. 'Download Adobe Support advisor to solve the problem'. Adobe Support Advisor was interrupted...

  How can I install my program?

  The Mac is new. I removed some Adobe applications manually, it is perhaps that the source problem.

  Thanks in advance

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

• Photoshop could not be initialized due to an error in program

  Today, I became a member of the creative cloud with Photoshop and Lightroom.

  After installing Lightroom works allright, but after starting Photoshop, I get the message that Photoshop could not be initialized because of a program error.

  I run the cleaning of CC, but unfortunately no effect tool.

  System: apple imac 3.2 Ghz intel core i3 4 GB 1333 Mhz DDR3

  OS X version: 10.9.5

  I hope that someone found a solution?

  Kind regards

  Mr. Verbiest

  Hi Jeff, thanks for your suggestion. In the meantime, I had several contacts with the support of Adobe. Finally, we arrived at the conclusion that the error was caused when the conversion of the colourtables.

  Then on my computer (imac OS X), we looked for color adjustments. Here's the System Library / Application Support / Adobe / Color.

  We have renamed the colorsettings by adding at the end of the file name and restarted Photoshop .old. Very good start Photoshop and the problem was solved!

  Thanks to the fantastic support of Helpdesk!

• ? Error message when opening PE11. (online services could not be initialized. Please reinstall)

  When opening EP 11, error message: online services could not be initialized. Please reinstall appears. Reinstall does not solve the problem. What should I do next?

  How are you going to do the installation. Starting from a disc or download?

  You can navigate to the following location:

  C:\Program Files (x 86) \Adobe\Photoshop elements 11\Assets

  In the current folder - you can see if the following file is present or absent:

  ols_config. XML

• Satellite S50-B-12R - Webcam does not work

  I bought my toshiba Satellite S50-B-12R this Saturday but the moment where I couldn't use my webcam.

  I looked everywhere for my webcam drivers, but I can't find them.
  Also when I look in my configuration window there not a webcam.

  But once my webcam was working, I was on Skype and it detected my webcam so I used it and then when I tried to use it later it has not been detected more.

  So I would like to know if there are any missing drivers or maybe the webcam is not properly connected inside the unit. And what I need to do to be able to use my webcam

  Welcome,

  Robby

  First laptop was already preloaded with Toshiba picture and all the drivers and software have been installed too.
  That's why driver extra installation isn t necessary.

  Secondly, preinstalled Win 8.1 system contains the driver for the webcam. The driver is designed by Microsoft and part of the system.

  The 8.1 win provides a webcam application that you might find on the surface of 8.1 to win.
  But before using the application, you must add the webcam access and change privacy settings.

  Charm-> Open bar (Win key + C)-> settings-> permissions enable webcam & microphone

  Now close and reopen the webcam app. You should have your camera app works fine now

• Satellite P200 - 10G - some programs do not work

  Hello world.

  OK, so we have a record of product recovery and we have tried to reinstall Windows, but it wouldn't work. Some of our programs as the built-in webcam and Bluetooth don't work without reason. Other programs like Google Earth and AVG, antivirus, we cannot get out of our system. I installed the laptop with the recovery disk, but now when I put this drive and I try to reinstall Windows, nothing happens. There is no error message or anything. All the programs that I installed in my notebook, I can't delete. For example Google Earth, & AVG antivirus program. I get a message that says that these programs are already deleted, but they are always in my book. My 80 GB of disk c is almost full and I have no idea what occupies this space. All my music and photos etc are on my E drive.

  Does anyone know what we should do?

  Much appreciation,
  Musa

  According to the specifications of the laptop Satellite Satellite P200 - 10G has no module BT and BT will not work.
  In the disc specification HARD is described as 120GB (5400 RPM) SATA. The question is: do you still have original HARD drive inside or you have upgraded with a new one?