Satellite L650 - 10 M - webcam could not be initialized

Similar Questions

• Satellite L875 - 10g - software webcam could not be initialized

  Hello

  A decided to try to use my webcam via Skype and realized his does not work.

  After numerouse hack I realized I have to install the software. Downloaded, but the application kept saying 'failed to initialize. "

  I took it to my friend who advised me that the webcam is not in the Device Manager.

  So I uninstalled everything (including Skype) called Toshiba that reported me on this site to download the driver of the webcam that I did it, installed, but always without success.

  My last resort last night was a complete recovery (factory setting) nothing other than the driver but still nothing installed in devices and query Manager shows "failed to initialize".

  Help please!

  > My last resort last night was a complete recovery (factory setting) nothing other than the driver but still nothing installed in devices and query Manager shows "failed to initialize".

  If it is ONLY a software problem, then a complete recovery procedure should solve this problem but it didn t
  So I think it may be a hardware problem this webcam not is not listed in the devices Manager could support my hypothesis.

  By the way: is enabled in the BIOS?
  BIOS is up to date?

• Satellite L650 - 1 M 0: could not activate the new wireless card

  Hello

  I replaced the wireless card in the laptop on WiFi + BT (Combo). New brand of laptop do not had favor of BT
  Bluetooth and WiFi work correctly on the system drivers that the system itself.

  The only problem with the new adapter is unable to activate or disable the network modules.
  Since my laptop does not support default BT will automatically turn off the controller module.

  WiFi must be turned off and as in the previous card - a function key. Unfortunately, wireless in the function bar option has disappeared, and the FN + F8 key combination does nothing. Responsible for the light WiFi is on all the time.

  It is possible to activate the WiFi module as before?
  Very please help!

  Laptop: TOSHIBA L650 1 M 0
  The new network adapter: BCM94313HMGB

  Sorry for my bad English.
  I used the Google Translator because I can't speak English. Only the Polish language ;)

  > Is it possible to activate the WiFi module as before?

  You have replaced the WLan module, which means that the hardware configuration has been changed. This means that the different module has affected the functionality of the software.

  The new WLan/BT BCM94313HMGB combo card seems to be designed by Broadcom.
  Of my knowledge that supports most of the laptops Toshiba Intel / modules Realtek or Atheros. This is why I think there may be a compatibility problem between the FN key software and this module.

  Maybe you can try to install the Broadcom driver once more to check if this can help, if not you will have to renounce that.

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Sorry, scanner could not be initialized. (Scanner not found.)

  I use Mac OS X version 10.9.2 and HP all in one Officejet J6480.  The all-in-one is able to print but not scan.  Here is the error message.    None of your above worked for me.  Either you are the reference to a different version of the operating system Mac or another HP printer.  What would you recommend for my Mac and a printer?  Thank you.

  Sorry, scanner could not be initialized.
  (Scanner not found.)

  Hi JeanneDave,

  Thank you for visiting the Forums from the HP Support! I understand since the upgrade of the OS to 10.9 Mavericks you get an error "sorry scanner could not be initialized" with your HP Officejet J6480. After some research, there is no complete abailable features of software and drivers for the J6480 JO, that said that the printer would have been installed using the Apple updates. To get a better understanding of take a look below:

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  Now, that being said, this means not you will not be able to scan just average there are a few different options, then you can use to see here to learn how to scan with or without HP software: how Scan: OS X v10.9

  I hope this helps!

  Thanks again,

• googlegroup mail receives an error "msoe.dll could not be initialized.

  I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

  I created a Google Group, invited members, received their responses and published the list of members.  When I tried to send an e-mail to the group, I got a message that msoe.dll could not be initialized.  How to solve this?

  Sorry, but the info was so 'goop gobbly' for me.  Y at - it somewhere that I can download the msoe.dll?

  While you might be able to, two points...

  (1) not a safe idea.  Microsoft does not offer it more (they do not support OE6) and nowhere else - you take your chances.

  (2) most important - the file is not likely your problem.  Something else is probably causing this message.

  You may need to remove (I suggest renaming it to RECORDS. OLD personally) RECORDS. DBX file.  If Folders.dbx is damaged, OE often stops displaying the files to the existing *.dbx files, and sometimes OE will simply refuse to start. Also a bloated Folders.dbx can OE run very slowly. These two problems can be repaired by closing OE and deleting Folders.dbx. Understand although you will lose the mail directory structure, all the discussion lists and all synchronization options and this message rules will probably have to be edited

  There is another option where you could not lose the folder structure (will not be rebuilt) because you are going to import it from a BACKUP of everything what you do by renaming the whole store folder before you rebuild everything in OE - but I thought it would be more simple.

  C:\Documents and Settings\[your username]\Application Data\Identities\{...} \Microsoft\Outlook express

  (The usual location for the file.)

• MSOE. DLL could not be initialized

  I've recently compacted my emails in OE express and can't open my OE.  I get the message "OE could not be started.  The application could not open the OE message store.  Your computer may be out of memory or your disk is full.  For more assistance, contact Microsoft support.  (Ox800C013B).  Outlook Express could not be started because MSOE. DLL could not be initialized.

  However, I read on another forum, and in trying to fix it, I can't find the OE message store folder.  Previously, I required a password for my OE.  I have compacted my emails to my primary identity and began to receive the "file MSOE. "DLL cannot be initialized... disc is full or not out of memory" message.  I discovered that I could connect to another OE identity.  I logged in the email of alternative identity, then trying to fix the main identity (which I just can't get in) I unchecked password required on the main identity.  My email is configured to log on as an identity main so now I can't sign off another identity to perform your instructions "with OE closed."  What should I do?

  If the solution I posted in response to the same question here does not help:
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/7ba8cb7a-6d25-4C24-A128-09502093b370/

  Then, start here.

  When OE crashes or won't start
  http://www.insideoe.com/problems/errors.htm#crash

  Bruce Hagen ~ MS - MVP [Mail]

• I moved my windows mail contacts place and now I can't find them. I get the message the file MSOE. DLL could not be initialized. Windows Mail does not open.

  I was exploring the information about "move your files and user files to another partition" I'm a little short on space.   I chose the location tab in my Contacts Properties window to have a look at the possibilities of some of my folders move to another partition on my computer.   However, I clicked obviously wrong, and now I got a message that the file MSOE. DLL could not be initialized.   I tried the system restore, but no restore points are available to me before today.  Are there jobs that I can do?

  Under your username must be a Contacts folder.   If there is a step, and then either move the new Contacts folder to where he was, or create a new folder under the user name, and then see if it works then.  So if you have a username of 'Heather' contacts should be under C:\Users\Heather\Contacts.  Try and then see if it works very well.  Otherwise, you will need to create a new user and then try to get this to work.

  Steve

• Windows mail did not start because MSOR. DLL could not be initialized

  After a number of updates have been installed, by computer could not restart automatically. When he did re - start, windows mail: could not be started.initialize junk filtering. Your computer may be in memory or the disk is full (0 x 80070002).

  When I press OK, I get: windows mail did not start because MSOR. DLL could not be initialized

  Hello

  What is MSOR. DLL or file MSOE. DLL?

  Perform the steps mentioned below and see if the problem resolves.
  a: Close Windows Mail.
  b: click on Start -run - type regedit and click OK
  c: Navigate to this key
  HKEY_CURRENT_USER-Software-Microsoft-Windows Mail
  d: right-click on that key / export / save under / where you want (with a. Reg)

  e: return this button again.
  f: Position yourself above and then do a right click and delete
  g: Close the registry editor
  h: restart the computer

  Registry warning.
  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope that helps

• Cannot open windows messaging because initialize junk filter MSOE. DLL could not be initialized

  Original title: initialize the MSOE junk e-mail filter. DLL could not be initialized

  cannot open windows mail

  Hi CyndiJackson,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Users have fixed similar problem by following the steps below:

  (a) click Start, type regedit in the search box

  (b) then go to this registry key

  (c) a HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

  (d) and right-click on it and choose export to back it up.

  (e) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Scanner could not be initialized

  I work on a macbook. I have a HP Photosmart C6180 all-in-one. I run Mac OS X 10.5.8. My printer is mounted wireless via Airport Extreme wireless network. My software and drivers are up to date for all of the foregoing.

  When I try to analyze what I get:

  Error

  Sorry, scanner could not be initialized.

  (An error occurred communicating with the scanner).

  This includes the launch via the software on my laptop HP and the menu scan on the C6180.

  Suggestions? I have tried to remove the HP software completely, remove the network printer and then reinstall them all.

  If you still have the HP software for pre - 10.6 Snow Leopard on your Mac, you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• OSX 10.5.8 & J6480... Sorry, scanner could not be initialized

  After several years of use of the scanner without problem, I can not scan documents on my HP J6480.  I'm on OSX 10.5.8

  I insert the document into the scanner J6480, my computer detects its presence and jumps to the top of the HP Device Manager window. However, when I click to scan, the program runs for a while and returns the message:

  Sorry, scanner could not be initialized.

  (Scanner not found)

  I suspect that what follows is related to the same problem. While trying to solve the problems of the control panel of the printer, I received the following message:

  The selected URL is: file:///Library/Documentation/Help/Hewlett-Packard/Context_Help/OJ_J6400/c_TROUBLESHOOTING

  Download the latest version of the software for your printer from Driver link request at the top of this page.  You may need to reload the software HP

• LR 6 Installer could not be initialized (Mac)

  Hi, try to translate from the french, the error message I got when trying to install on my Mac Book Air LR6

  "Setup could not be initialized. 'Download Adobe Support advisor to solve the problem'. Adobe Support Advisor was interrupted...

  How can I install my program?

  The Mac is new. I removed some Adobe applications manually, it is perhaps that the source problem.

  Thanks in advance

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

• Photoshop could not be initialized due to an error in program

  Today, I became a member of the creative cloud with Photoshop and Lightroom.

  After installing Lightroom works allright, but after starting Photoshop, I get the message that Photoshop could not be initialized because of a program error.

  I run the cleaning of CC, but unfortunately no effect tool.

  System: apple imac 3.2 Ghz intel core i3 4 GB 1333 Mhz DDR3

  OS X version: 10.9.5

  I hope that someone found a solution?

  Kind regards

  Mr. Verbiest

  Hi Jeff, thanks for your suggestion. In the meantime, I had several contacts with the support of Adobe. Finally, we arrived at the conclusion that the error was caused when the conversion of the colourtables.

  Then on my computer (imac OS X), we looked for color adjustments. Here's the System Library / Application Support / Adobe / Color.

  We have renamed the colorsettings by adding at the end of the file name and restarted Photoshop .old. Very good start Photoshop and the problem was solved!

  Thanks to the fantastic support of Helpdesk!

• ? Error message when opening PE11. (online services could not be initialized. Please reinstall)

  When opening EP 11, error message: online services could not be initialized. Please reinstall appears. Reinstall does not solve the problem. What should I do next?

  How are you going to do the installation. Starting from a disc or download?

  You can navigate to the following location:

  C:\Program Files (x 86) \Adobe\Photoshop elements 11\Assets

  In the current folder - you can see if the following file is present or absent:

  ols_config. XML