Satellite C660D-10W - 02 wireless broadband does not connect

Similar Questions

• Sky wireless broadband does not connect with Vista

  I just changed my BT broadband to Sky.It works fine on my Mac but not connecting with my roommates PC that uses Windows Vista.After calls long with sky they said there is a problem with the DNS. I tried to call Microsoft, but they want to charge me which I am unwilling to do. I can connect to the internet on the pc with the thin Ethernet cable. In the center of network share, I have a cross between the network and the help of Internet Icon.Please as it should be sorted as soon as POSSIBLE and I cannot believe with such a company big as the sky that has thousands of customers, they say that it is a known issue and there is nothing they can do... So basically they say that anyone with Vista cannot use their wireless computers!

  Help, please...

  Hello pookieboy140,

  I suggest that you start with the management of Network Diagnostics on the computer that will help you in error, like why you are not able to connect to the Internet.

  You can refer the link that will give you information about this below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Since you are not able to connect to the Internet, the best way to solve this problem is to contact your service provider.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• OfficeJet pro 8600 more connects wireless, but does not connect to Internet

  I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

  does not connect.

  Hi susea;

  Hope you are doing well and I'm sorry that you are having problems.

  Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

  If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

  You can change this setting by going to do the following:

  Press the Win key on your keyboard.

  1. Type Ncpa.cpl (this will take you to the network connections)
  2. Select your wireless connection
  3. You will see a screen on the botton, you will see a button called properties, near the left button
  4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
  5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
  6. Type 8.8.8.8 and 8.8.4.4 airfield

  I will also choose a static IP address, and this can be done here as well.

• The NSB M250r mouse optical/wireless mouse does not connect

  I use a windows XP computer, I got recently a new mouse for. The receiver installed the software for it, but the mouse does not connect. I turn on the mouse, but no connection is established. I tried all USB ports and still nothing.

  I would only try the mouse settle if you have totally abandoned on the support of people in customer service. If you start to disassemble the mouse, you will probably void any warranty that might come with the unit.

• Satellite 1950 801 - battery, wireless keyboard does not charge either

  Toshiba Satellite S1950-801

  The charge of wireless keyboard battery is no longer, the powerbutton doesn't work anymore, what can I do?

  I know that the computer is old, but maby it is a solution for this problem.

  > The battery to the charge of wireless keyboard is more, the power button doesn't work anymore, what can I do?

  You are not able to turn on the laptop?
  HM looks like a laptop computer s hardware problem and maybe that is the reason why external Wlan keyboard don't invoice not the laptop is dead and so the keyboard do not work

  Why the laptop does not power upward?
  Hmmm. issue of goo. Perhaps the AC adapter is dead and can not provide the power of portable and laptop battery is dead too.
  This is possible, but in most cases it s not the reason why in most cases, the motherboard could be defective

  However, only the laptop technician can check the hardware parts and could provide more details

• Satellite L450D-128 - Wireless internet does not connect

  Hello

  I have a Toshiba Satellite L450D-128 and it won't let me connect to a wireless network and I can't find the switch wireless and ive tried FN + F8, but it does not work. Could you please help.

  Thank you Ryan

  Hello Ryan

  I don't know what version of Win7 do you use and what can be the problem of using WLAN but if you use original recovery image, everything should work properly.

  At first check please if the wireless network card is installed correctly. You can check in the Device Manager.
  If the wireless network adapter is installed correctly, it must be enabled. Usually, this can be done by using the FN + F8 key combination.
  >.. .and ive tried FN + F8, but it does not work
  What does not work exactly? You have problem with the FN keys in general or just using FN + F8?

  When you press the FN key you find cards flash at the top of the screen?

• Satellite L300-17N (PSLBCE) - wireless card does not work

  Hello

  I recently bought a Toshiba Satellite L300 (PSLBCE) that came without any operating system and the dirvers. I installed WXP PRO SP2 above and downloaded all the drivers from the Toshiba site. Everything has been installed ok and functional except for the WLAN card. The wireless network card, it is a Realtek RTL8187B but it is not recognized by my laptop: if I Check Device Manager it does not appear (it does appear that "Network controller" with yellow mark). Then I went to Realtek website and download new drivers from there and installed again... also with these dirvers WLAN card still not recognized.

  No idea this coud be the problem? I don't know that I have downloaded the correct dirvers from Toshiba Web site as well as the Realtek site... but none of them helped. The chipset drivers have also been installed and also the last BIOS version (my BIOS version is newer than the one on the site of toshiba with the drivers for this model)
  May this be a conflict with the other dirvers or WXP PRO SP2?

  Thank you

  Hey Buddy

  Satellite L300-17N does not support Realtek RTL8187B but Intel 11 a/b/g (13ch) - Golan Wlan card.

  I recommend to visit the portal of Toshiba Europe WLan and recommend to download and install the driver Intel WLan from here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Here, you can try the Intel PRO/Wireless 3945/4965/5100/5300 driver package!

  I would appreciate your comments

• Satellite L40-18 X - wireless switch does not work

  Hello

  I installed Windows 7 on Satellite L40 - 18 x, PSL48E, the installation seems correct. After installation I noticed that the wireless switch on/off (power) switch does not. The wireless network is working except the functionality of switch.

  It worked on Windows Vista. I installed all the up-to-date drivers for the network card wireless, including atheros, configfree, chipset drivers, but no effect.

  Please can someone tell me the possibole solution?

  concerning

  Salahaddin

  Hello

  I agree with resident.
  The Wlan switch on the side of the laptop has all the drivers and it works independently of the installed software!

  The FN + F8 key combination that allows the WLan should work on if install you value added package.

  You should also check if the WLan card is set on IT in Device Manager-> properties-> Advanced tab WLan card.

  See you soon

• Satellite 1905-S303 PCI Wireless card does not start code 10

  I put a PCI BCM94306PM broadcom wireless card in my laptop. The laptop is equipped with led however one is damaged and can not be connected, these cards may work with only one side and I even read somewhere that they can work on a short range with no led. My problem is the Device Manager indicates that the device cannot start code 10. I have a fresh install of XP Pro SP1 (not from the original restore disk). With this in mind, I think there must be some Toshiba utility or the missing driver to allow the map to work. Any help appreciated.

  Hello

  Code 10 means that it is not present, not working not properly, or does not have all the drivers installed.
  In this case you need to download the latest driver on Toshiba website and install it.

  Best regards

• Wireless network does not connect

  "At the time to choose a wireless network to connect to, the computer keeps turning of ' acquire a network address" to "not connected".  Can I have a virus?  The key of wireless network has been re-verified.  The wireless card find several near by network and seems to work very well.  I did not change any system and this just started happening.

  If you get an error message, please report completely, without paraphrasing.

  I know you said you checked your wireless network key, but please try the following (assuming you use Windows to configure your wireless network card):

  1. Open network connections (start > run > ncpa.cpl > OK)
  2. Right-click on the icon for your wireless adapter and select Properties
  3. Click on the tab 'wireless networks '.
  4. In the list of "Preferred networks", select your network and click 'delete '.  Unless you regularly visit other wireless networks or have a specific reason to keep the configuration of a particular wireless connection, I suggest that you remove all entries in the list or favorite networks.
  5. OK your way out.
  6. Go to "View available wireless networks" and connect to your network.

  If this does not help, I suggest to delete again your network wireless in the list of preferred networks (see above), but now utility access to your router configuration using a computer connected to the router by Ethernet and temporarily disable all wireless security features.  As a general rule, only wireless security should be the wireless encryption, but if you have configured additional barriers, such as MAC filters or time restrictions, turn them off as well.

  Can connect you to your router without active wireless encryption?  If so, re - activate the encryption on the router using the Ethernet-connected computer, making sure that you know which has been entered into the router for the encryption key (utility router configuration most show the key to encryption "in the clear" so that you can read).  Then try to connect wirelessly.  When you access the key this time, it should work.

• WGA600N Wireless N does not connect to the N, G speed only

  I have a WGA600N Wireless-N game adapter and a router WRT160N (v3).   I can't get the adapter for games to connect at speeds of G.    I tried to adjust the adapter for games to use only the N band, but then he used to see even the router at all, it does not detect the network period.    If I have configured the router to N-band only, the same issue happens (though ideally I need in mixed mode for my laptop anyway). I have connected the WGA600N directly through the web interface of the intellectual property and has tried a variety of settings, but no help.  I can clearly see in the State of the adapter of game that it is connected to an 11g-force when the value of mixed mode.    I use WPA encryption if it matters.

  I have the adapter for games within a few feet of the router at this facility, so I don't think it could be a question of signal strength, but unfortunately I do not have another Wireless-N to test against the router.

  Any ideas?

  Just to follow up, I was able to get the speed 11ng use WPA2 AES mode only to work.   This isn't the perfect solution for me because my PSP only supports WPA WPA2 not - however N speed for my consoles wireless is more important, so I'll just have to manually change my router settings any time I want to connect any WPA or less peripheral encryption online.   Not perfect, but better than nothing solution.

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• Computer can see wireless but does not connect

  I have a new HP EliteBook Folio 1040 G1 running under Windows 7 64-bit. The computer can see the wireless network, but when I try to connect to them I get a pop up saying "Wireless: assocaiting" followed by a saying "Wireless: disconnected" and the connection never works. In this case connect to any wireless network. I know that networks and passwords are correct, because my phone and iPad can connect to them without problems.

  I've updated all the drivers via Windows Update and also the SP support Assistant. I tried to uninstall the wireless driver and allowing windows to discover and install from scratch. Nothing seems to work. I see a similar thread a few years ago in the forums but no resolution. I never got so so boredom before wireless connection and I can't help but suspect a hardware failure.

  Can anyone suggest anything?

  Thank you

  Phil

  OK, I realize, but this cannot help others, after raising a warranty with HP call, it turned out that my problem was hardware after all. HP sent a technician to replace the network card, but when he opened the laptop, it turned out that the antenna is detached from the card wireless altogether and reataching it solved the problem.

  Like I said, probably not much help to anyone because it was a specific question, but I thought I would post the result anyway.

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?