Satellite M40 - 136 product dvd recovery

Hello

I have problems with my laptop Satellite M40 136 I bought a year ago. If I close down the machine when I then turned it on it would give me a screen saying there is a problem in Windows and gave me the option 'Start windows normally', 'start with the last successful settings', 'start in safe mode', 'start in safe mode with networking' or 'start in safe mode with command prompt '. It would usually take several attempts before that Windows would fire up ok, any option to choose. However yesterday any have repeatedly tried it would not be in windows.

I decided that I need to use the dvd - rom product recovery is a relocation complete (fortunately I had saved my personal files). I did it, but at the end when he says 'ctrl-alt-del"to restart, reboot I got the same message"problem going into windows"with the same options. I repeated the recovery process 2 more times with no luck.

This morning, he did go further and asked me to go through the installation process of Windows (i.e. giving the phone a name, asking if I wanted to save the machine with toshiba/microsoft etc.) However he then pop up with the message "problem going into windows" with the options that I mentioned earlier. I choose any option that he ends up back on the same screen.

Does anyone have any suggestions?

HI Nicky,

It is possible that you have a problem with your hard drive. The operating system will always be usually resident in the same sectors of the hard drive even after a re-installation using your recovery CD, the same sectors of the hard drive will be used to store the files of the OS.

I suggest that you try to run a CHKDSK/F on your hard drive to see what it brings. Of course id there are lots of bad sectors then will consider you replacing the hard drive.

Kind regards

Tags: Toshiba

Similar Questions

  • Cannot start up satellite M40 136

    Hello

    I have a Satellite M40 136 2.5 years old. I used it yesterday and then closed the lid then it shut down as usual. About half an hour later, I realized that I had to check a file so I opened the lid and normally he would back automatically, but it didn't. I pressed the button, which is surrounded by an LED, I think than orange means it's pending otherwise it is blue.

    When I pressed on it, he showed the light orange for about 2 seconds and then nothing for 5 seconds and then blue for 5 seconds. For these last 5 seconds the machine looks like it, he's trying to start, but then it off immediately. I tried and tried again, but it does the same thing. I tried to use the power cable. I managed to put the recovery DVDs during the 5 seconds, the blue light is on and I press the 'C' button, but it does not work.

    Does anyone have an idea on what I can do to get the machine to boot?

    Nicky

    Plug the laptop! Remove the battery and the AC adapter.
    Then wait about 30 min, then insert the battery and connect the AC to the laptop.
    Check if the mobile feed.

    If this isn't the case,-> contact ASP (certified partner) in your country, because the strange behavior of cell phone looks like a serious problem that cannot be solved by a common user!

    Good bye

  • Satellite M40-136: network card is damage

    Hello

    I have a satellite M40-136, which is a little more than 2 years. I have cable broadband installed and this had led me to discover that I have a problem with my network card (a Marvell Yukon map I think).

    I had guys on the network at work to check the laptop and they say either the network adapter connection is loose or the card is damaged.
    I rang one of their guys said tech that I need a new main board because the network cards are integrated on all laptops and PC WORLD.

    Is this correct? If it is then it will cost an arm and a leg to fix it.

    Nicky

    Well, that's good.
    Map of LAN (RJ45) is soldered on the motherboard.
    Perhaps an independent technician with experience might be able to solve this problem, but in general, the motherboard should be replaced.

    The motherboard is one of the expensive parts and you are right; the new Council is costing a fortune

  • Satellite M40 reads no DVD of product recovery

    Hey all.

    I have a little problem that I hope someone can help me.
    My laptop Satellite M40 fell while he was in the bag and the dvd player has stopped working.

    I had repaired it and it plays CD but I can't get the recovery disk to work.
    It opens, but for some reason, the files are unreadable.
    When I try to press C after having turned it on, the computer sounds like it's working, but then the windows XP just icon appears.

    Can someone help or give advice? I would really appreciate

    Seems that the drive is not able to read the original recovery CD Toshiba.
    According to your post, I don t think that the recovery CD is defective or broken.

    In my opinion, the problem is related to the CD/DVD drive. Maybe the lens can not calibrate correctly after the fall of the laptop.

  • Satellite M40-145: CD/DVD player will not play some DVD

    Hello!

    I am the owner of a Satellite M40-145 bought a little over a year; DVD driver worked perfectly until three days ago, but today I discovered something... strange. Still, it reads the DVD business and burned the DVD + r, but apparently it does not read the DVD - r serious more. I tried with different DVD - Rs, I burned the same DVD player, without success; trying to access the DVD gives a message "insert the disk in drive D:".

    In this case, I'm talking about movies on DVD. Please tell me there is a way to fix this without sending the computer to the customer service...
    I wouldn't think he fell down a few days after the expiry date of the guarantee.

    Hello

    Well, you can try to remove the Device Manager order form.
    After restarting again the reader should be recognized again. Then, check if it is possible to read the DVD - R, CD.

    But the question sounds like a lens calibration error. If you use different media, the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
    Unfortunately, in this case only the replacement of the drive will resolve this problem.

  • Re: What is the difference between Satellite M40-103 & Satellite M40 136

    Hi, can someone tell me what the difference between the two laptops;
    M40-103 and M40 - 136.
    They seem to have the same characteristics.

    Thanks in advance.

    Hello

    Yes, it is possible
    In most cases, the laptop hardware parts are the same, but only the system language is different, it means that the two laptops could be released for different countries.

    But the hardware specs are the same

  • Satellite A40: Question about product dvd recovery

    Hello

    Please help me on my computer toshiba Satellite A40 laptop...
    I want to reformat my HARD drive with operating system XP...

    My first question is, it installs my XP OS after that I run the recovery cd?
    I'm afraid that after I run the recovery cd, I'll lose my OS XP...

    I don't have an XP CD... I only got this product recovery cd (disc1)

    There a disc2 because the cd that I got was just disc1...

    Please help me with this...
    Thank you

    Restore CD contains recovery image. Recovery image include the operating system, drivers, utilities and software tools extra.

    When you install recovery image you own preinstalled WXP. For cell old models were most two disks: 1/2 and 2/2 so if you the second you will not be able to install the OS completely.

  • Satellite M40-136 PSM40E: faulty driver for Multi-lecteur of DVD

    Hello
    I got my dvd rw Multi-lecteur drivers faulty in that it burns no more files. How can I have access to the driver/firmware for matsu * a uj - 831 s? the bios intel available again "failed to loadbiosimage".

    Thank you very much
    George

    Hello

    I think that you need to download the latest driver of DVD for your M40 from the Toshiba download page and reinstall.

    Good bye

  • On the Satellite L650-116 product key recovery

    Hello

    I am owner of laptop Toshiba Satellite L650-116. I bought my laptop with Windows 7 Home Premium 64 bit (OEM license) original. Unfortunately I am forced to reinstall my Windows 7 system, but I realized that my product key sticker is wiped out (I can't recognize any of the numbers). I don't know if I have the recovery partition (I know there is a way to reinstall Windows, if you have this partition).

    Are there opportunities that I can restore my product key without having to buy a new one?

    I would be grateful for a quick response!
    Greetings,
    Edyta.j

    Hello

    At first, I have to tell you that this product key that you can see on the Microsoft sticker doesn't help. This product key belongs to the original version of OS you have with your machine, it cannot be used to activate Windows if you install your own version.

    First try to install the original recovery, if possible. How it works, you can read on - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

    Please post comments.

  • Recovery of Satellite L735-101 with DVD recovery

    Hello

    When I bought my laptop, I created the recovery DVDs. Today, I try to reinstall this PC with this DVD.
    The integrated DVD burner no longer works and I connect an external DVD burner on a USB port.
    I boot from this external DVD.

    The operation starts normally, but it seems to be automatic without menu or the option to choose.
    And after a few minutes, installation try to copy a file from ZZimg\14637XSP.swm to x:\... infinitely.
    I have try several times and I sometimes get a message: copy of CRC failed.

    I change the HARD drive, but it's the same problem.

    Could you help me please?

    Just for your info: recovery discs can be ordered on - https://backupmedia.toshiba.eu/landing.aspx

  • Audio buttons do not work on Satellite M40 - 136

    Does anyone have an idea how to get the play/pause stop buttons etc.? They worked once but have not worked since.

    Hello rain.

    You did it all changes (reinstalling the OS)?
    Please check the properties of Toshiba controls in the Panel. In multimedia applications, you can set a good player that should be used for audio CDs and video DVDs.

    As far as I know these buttons can be used in Windows mode and mode of fast Media Player.

    Try to reinstall V3.14.1503 controls TOSHIBA (to 6). You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com

    Good bye

  • Satellite M40 136/PM740D173/512/60

    Can someone please tell me how to turn on the built-in computer microphone, or in the Act if it is built in microphone?
    The manual clearly referred to one and gives a warning about feeding possible return between the microphone and the speakers on page 4-26 in paragraph ' using the microphone'.
    Thank you

    Hello

    One of my friends has a M40 and there is no internal microphone. Only audio external Microphone Jack.

  • Re: How to disable boot PXE 2.1 Pre on Satellite M40?

    People
    I would like to disable the PXE 2.1 Pre boot that seems to be part of the BIOS on my laptop. It's just a gene such that it expires after a while.
    the laptop is
    Satellite M40-136
    BIOS V1.70
    2048 MB RAM
    Win XP Pro operating system

    I don't see a setting in the BIOS to disable the PXE 2.1 Pre Boot. I don't think its anything to win the OS it loads at switch on before the start of the BONE.
    Anyone know a solution please.

    Thanks in advance.

    Dennis

    AFAIK, you can't turn off.
    What you need to do is to change the boot order in the BIOS.

    Set the LAN as last bootable device as first boot HARD drive device. That all s that you do.

  • Satellite M40: message: can not play because the DVD decoder is not installed

    not serious... I am back... I did a little reading and tried to read another cd in the drive and the message came to say "can't play because the dvd decoder is not installed, so I guess that's the problem because I have a recovery * DVD *.ยป Anyone know where I can find a dvd for a Satellite M40 decoder?

    > can't play because the dvd decoder is not installed
    This message appears if you want to play DVD movies with an application like Windows Media Player that has no (plug-in) installed DVD decoder.
    Usually the DVD can be played with special programs like WinDVD or PowerDVD for example!

    But this DVD decoder has nothing to do with the Toshiba Recovery DVD and the fact your new DVD Player cannot read the recovery DVDs.

  • Satellite M40 - cannot boot from the recovery cd after format HARD drive

    Hello

    After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

    After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

    Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

    Hello

    Can you see the HARD drive with all the details in the BIOS?
    If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
    If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

    But this should not affect booting from a bootable CD.
    Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

    The question is; Why you are unable to boot from any CD?
    Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
    If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

Maybe you are looking for

  • About Airport Express speed

    So I have an airport express 802.11n 1 St gen. I just had a new place and got a TWC modem with internet high speed 200/20. To maximize the speed of the internet, I bought my router? And if not what device would be capable of managing the total capaci

  • Excel sheet can not be changed op OSX machines

    We received an Excel spreadsheet for tracking working hours. This Excel sheet works fine on all devices Microsoft with Office 2010-2016. When we try to use the same sheet Excel on a Mac Excel sheet can not be filled. Excel keeps saying that it is sec

  • separate single time to timestamp value

    Hello Time stamp has two time & date. Is it possible to separate the time alone time stamp value?

  • BlackBerry Smartphones BBM disappeared after the 7.0.1 update

    I've updated BBM from version 7 to 7.0.1. After the reboot, I found that my BBM was gone. I checked my world in Blackberry World, to see that it is installed, but it was gone. So I had all my BBM Messages messages. Make a restore from a previous back

  • Substance of the message of change of blackBerry Smartphones

    Just got my first BlackBerry. Some things are fairly easy to get to, other property a bit frustrating... I would like to get rid of the background of the band in the message window. It does not seem to make the connection between the choice of the th