Why anyone cannot access a device of storage attached to the Linksys router?

Similar Questions

• Cannot access a file with a padlock in the icon.

  Cannot access a file with a padlock in the icon.

  I created a file using an application called TV Expert (download the file of my Cam handy Sony Hi-8 on PC). I can access the file by using the software, but cannot access the file using Windows Explorer. The location of the file is c:\Program Files\TVExpert\Movie.

  The file size is about 3.6 GB , when I check the size of the Explorer folder it sows 0 bytes .

  When I open the file using the TV Expert software I see a Pad lock symbol in the icon of the file

  I want to copy the file to another location so that I can edit the file.

  Try this: right click on the file > do you see in unlock general tab button? If so, click it.

  ...

  If it does not help...

  What happens when you try to copy this file to another location? Do you take information that it can be done by the administrator? If Yes, there should be a continue button, so click it.

  You can also try this: right click on the file > Properties > Security tab. Who is listed under group or user names ? Is your user name? If not, you can click on change... > Add... > enter your username > OK

• How to access internet throug a firewall of the Linksys router?

  Recently, I went to the ADSL2 + Internet broadband.

  So bought router "CISCO Linksys WAG120N" as my hardware firewall (FortiGate60) had no any port to connect to ADSL.

  Now I am accessing internet throug the Linksys router above and do not use the firewall because I don't know how to configure the firewall to get access to the internet through the firewall of the router.

  My previous broadband service was directly connected to the WAN port on the firewall because it was compatible.

  Please help me to configure the firewall to access the internet from the router through the firewall.

  Thank you

  You must configure the WAG120N in Bridge mode and then configure your firewall to your (probably PPPoE) internet connection.

• Cannot access specified device or file _ path

  HI can anyone help me every time I have download a program, as updates to adobe, or a program for a digital camera (a disk) or try to access my firewall settings, I get a message saying (windows cannot access the specified device or file path. You don't have permission to access this item) this started when I took it to the shop and had done a system restore.     Please please can u HELP ME it has XP pro 2002 SP3, IE 8 I, M a COMPLETE NOVICE to the PC if I NEED STEP BY STEP ADVICE. Thank you helphelp

  http://helpdeskgeek.com/help-desk/Windows-cannot-access-the-specified-device-path-or-file/  See if that helps!

• Property or method of a null object reference. "OK, go crazy. account of $ 50 for a paypal account, if someone explains why & solution - "cannot access a pro."

  I guess that's cheezy to offer money to help (and I guess this a little tied to a post being discussed yesterday), but I'm so tired of searching - been trying things ALL day and its value at a minimum of $ 50 if someone takes a while to help with an explanation of what is happening and how to fix it (hopefully it's just a matter of newbie that I) be cursing myself for lack.)

  I have things to a restricted version of the app to demonstrate the problem. You can download (link at the bottom of page) and just run the html/SWF in bin-debug and you will see the problem (or perhaps understand the linke also supplied code). Click Connect and then ' Add used ' and it just put the cursor in the firstname field and click. You'll find yourself with the following error:

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at mx.managers::FocusManager/focusInHandler() [C:\autobuild\galaga\frameworks\projects\framew ork\src\mx\managers\FocusManager.as:601]
  to flash. display::Stage / set focus()
  at mx.core::UITextField/setFocus() [C:\autobuild\galaga\frameworks\projects\framework\src\mx\ core\UITextField.as:1525]
  at mx.controls::TextInput/setFocus() [C:\autobuild\galaga\frameworks\projects\framework\src\m x\controls\TextInput.as:1832]
  at mx.managers::FocusManager/setFocus() [C:\autobuild\galaga\frameworks\projects\framework\sr c\mx\managers\FocusManager.as:553]
  at mx.managers::FocusManager/mouseDownHandler() [C:\autobuild\galaga\frameworks\projects\fram ework\src\mx\managers\FocusManager.as:1896]

  I know that the problem is related to _defaultButton null in FocusManager focusInHandler (at least the debugger shows the problem here), but do not know why this is * there. You will see in two simple display batteries, I've set creationPolicy = "all" (I even tried to set createionPolicy = 'all' on almost all the components.)

  View the main relevant files:

  http://Pastie.org/610389

  Download the sample application demonstrating the issue

  http://DL.getdropbox.com/u/86998/EmployeeMaintenanceTest.zip

  If you file a bug with your testcase, this will help to make sure we don't break it in Flex 4.  I don't know if there will be a new version 3.x.

  I got around the problem by adding to the level superior canvas in Main.mxml:

  defaultButton = "{mainNavigation.addEmployeeButton}" "

  In my view, that principle is once you assign a default button in a container, to keep something like the default button after that.  If the focus moves to a container without a default button, then I think he's in trouble.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• My computer, I cannot access my account even though I have the password.

  I have problems with my user account on my laptop Inspiron 1525 Windows Vista. Although I tried to type my password to access my account, it keeps giving me a message. The message reads: "the user profile Service service has no logon. User profile cannot be loaded. "I appreciate all the comments and solutions to this problem of mine. Please and thank you s!

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• PhoneListener cannot access a public static vars initialized in the main thread

  Using the emulator (SDK 4.7, phone model 9500)

  I have a class PhoneListener defined and recorded, he gets the phone events without any problems. It's all public static public var that is initialized in the main thread is always null when it is examined in the context of the PhoneListener callback thread, when examined in the main thread or a son they are defined.

  I guess since the PhoneListener callbacks are called from a system thread, it cannot access the battery of my request - it seems correct? is this in any way about this?

  I tried Application.getApplication () .invokeLater (...), but validated all executable from the PhoneListener recalled suffers from the same problem.

  Thanks - Lindsay

  Exactly, that's what I was wondering - I found the answer according to the PhoneListener in the MIDlet . Now I store my UiApplication object in the running store and access them from the PhoneLister to publish objects on my main application via invokeLater.

  Thank you

  Lindsay

• WRT54G: cannot access IP addresses a particular range of the internet

  We have a WRT54G (material v6) we have used for some years, in conjunction with a modem cable to create a home wifi network. In recent days, we have been unable to access sites in the 130.160.x.x IP range (i.e. those at the University of Alabama). A particular example is ua.edu (130.160.4.131). The rest of the internet works fine.

  It's on Ubuntu 12.04, Windows 7 or Android ICS; with Chrome, Firefox, IE9, or SSH. If I connect the modem to a laptop Ubuntu directly by USB, I can get to ua.edu very well.

  I tried to reset the default router, update the firmware, connection via ethernet instead of wifi and use the servers Google's DNS 8.8.8.8 and 8.8.4.4 in the router, but the problem persists. Naturally, au helpdesk, Comcast and Linksys were all useless, helpless, or uncooporative.

  Traceroute looks like this:

  tsbertalan@hustlenbustle:~$ traceroute ua.edu
  traceroute to ua.edu (130.160.4.131), 30 hops max, 60 byte packets
  1 192.168.1.1 (192.168.1.1) 2,972 10,518 10,979 ms ms ms
  2 * * *
  3 you-9-3 - sr02.gadsden.al.tusca.comcast .net (68.85.205.121) Mrs. 21,529 Ms. 22,001 Ms. 22,432
  4 you-7-3 - ar02.huntsville.al.hunts.comcast .net (68.85.205.57) 23,350 32,048 32,432 ms ms ms
  5 xe-5-1-0-0-ar01.b0atlanta.ga.atlanta.comcast.net (68.85.109.221) Mrs. 34,972 Ms. 35,433 Ms. 36,119
  6 pos-3-5-0-0-cr01.atlanta.ga.ibone.comcast.net (68.86.93.125) 37,672 23,108 (68.86.93.201) pos-3-6-0-0-cr01.atlanta.ga.ibone.comcast.net MS MS ms 22,178
  7 pos-0-3-0-0-pe01.56marietta.ga.ibone.comcast.net (68.86.87.134) 25,761 26,809 26,300 ms ms ms
  8 * te4 - 2.ccr01.atl02.atlas.cogentco.com (154.54.10.233) ms 132,485
  9 te0-2-0 - 5.mpd22.atl01.atlas.cogentco.com (154.54.83.209) 29.493 ms te0-3-0 - 3.ccr21.atl01.atlas.cogentco.com (154.54.83.181) 28.450 ms te0-2-0 - 5.mpd22.atl01.atlas.cogentco.com (154.54.83.209) ms 28,892
  10 te3-(154.54.82.114) 2.ccr01.atl04.atlas.cogentco.com ms 191,126 te9 - 2.ccr01.atl04.atlas.cogentco.com (154.54.82.122) 192,406 te3-(154.54.82.118) 1.ccr01.atl04.atlas.cogentco.com ms 191,817 ms
  11 38.104.182.10 (38.104.182.10) Mrs. Ms. 35,561 Ms. 36,035 34,520
  12 *.
  13. *
  14 *.
  15. *
  16. *
  17. *
  18. *
  19. *
  20 *.
  21. *
  22. *
  23. *
  24 *.
  25 *.
  26. *
  27. *
  28. *
  29. *
  30. *
  tsbertalan@hustlenbustle:~$

  Any ideas?

  I could probably just pick up a cheap router and see if it works instead of investing too much time on it. It would be the best way to isolate.

  You can choose a refurb out of the store pretty cheap linksys router. It is never a bad idea to have a backup router anyway.

  I'm going to you humour with my last guess apart from the FBI or the NSA. A member of your family or a neighbor's an auburn fan and they consulted your router GUI and blocked the site using parental controls. That's my final guess.

• SAS storage attached to the FC NAS storage

  Hello

  I am designing a solution of BC/DR with VMware SRM using vSphere replication. Our ESXi 5.5 site production servers are SAS attached to storage, while our ESXi 5.5 DR site servers are FC attached storage. I wonder if it is a supported configuration, attached to the attached FC SAS?

  Thank you...

  Exactly. It is one of the main advantages of vSphere replication. It is based on the host to the underlying storage is not serious.

• D620: Cannot use an external video display attached to the laptop

  Latitude d620 Windows XP sp2, when I toggle the nothing affects F8 happens, no external monitor is attached. The gray little info-box representing a portable external video display and ad got a title: history of the "presentation Mode is:" the computer:

  1. Windows reinstalled by the assistance service
  2. laptop connected to an external LCD display "." Switched by F8. Successfully
  3. Intellitype pro 5.2 Windows and installed intellipont (mouse and wireless keyboard)
  4. some problems with the observed keyboard characters
  5. IntelliType pro 5.2 and uninstalled intellipont
  6. Cannot use the F8 key to switch between the display of the laptop and external display
  7. Impossible to step to the point 2 with recovery system

  So I'm stuck any suggestions to fix this?

  
  

• Why iTunes cannot access the iTunes Store on my Mac running 10.8?

  My Mac is running system 10.8.5. iTunes is version 12.2.0.145. iTunes does not connect to the iTunes Store. Says I need an internet connection, which of course I and is running. Also, I can not connect to the App Store. I tried everything on the card of Apple for "Cannot connect to the App Store.", including:

  Settings of Date and time incorrect (they are correct)

  Without serial number (it's here)

  Invalid or incorrect network preferences (everything seems fine)

  Invalid or incorrect certificates (did these steps twice but not go)

  Change your keyring (no blue & positives)

  Help please!

  Hi Jawman,

  First of all, check that you have tried all the troubleshooting steps of the resource If you can not connect to the iTunes Store .

  If the problem persists, here are a few more things to try:

  • Update to the latest version of iTunes.   12.3.2 iTunes is compatible with OS X 10.8.5.
  • If you have automatic updates enabled in iTunes, temporarily disable and check if you have incomplete downloads.

  Get help using automatic downloads for purchased Apps, music and books

  Resume interrupted iTunes Store downloads

  • Check the payment details for the Apple ID used for purchases on the iTunes Store.  To do this, you may need to re - enter your credit card expiration date and CVV code.  Make sure that the billing address matches what is on your bank statement.  Then click OK to save the changes.

  Manage your Apple ID account information

  Your identifier Apple is the account that you use to access all services Apple, App Store, Apple music, iCloud, iMessage, FaceTime, and much more. You can keep all of your information from Apple ID account to date of the Apple ID account page, such as your username, security information, name, birthday, devices and more.

  Update your payment information

  You can change your payment information in your Apple ID on your device or via iTunes. This payment information is the same as what you use to buy apps, music and storage iCloud.

  To change your payment information to an iPhone, iPad or iPod touch, follow these steps:

  1. Go to settings > iCloud.
  2. Tap on your Apple ID. If requested, enter your Apple ID.
  3. Tap on the payment.
  4. Update your payment information and press Next.

  To change your payment information to your Mac or PC, follow these steps:

  1. Sign in to your Apple ID account page.
  2. Down payment, click Add a card, or click on modify.
  3. Update your payment information and click Save.

  You can also change your information for payment in iTunes on your Mac or PC. Get help if you want to change your payment to zero information and do not see the option or cannot select.

  Take care

• When you try to add a new device, on access to tools, Options, Sync tab, no manage an account or add a device link button. I can get codes displayed to appear on another device but cannot access a screen that I can enter the codes.

  When you go to the tab sync, I see nothing like the picture in the help pages that show a button manage an account and Add link device. I think I need to access the device link add to reach a screen that I can enter codes to set up the easy way sync. I have already overcome the problem of connection and enter my key synchronization but it's more effort and it seems to me that adding new devices does not work as described. I'm on a Win7 PC and a laptop Windows XP using Firefox 5 and using Firefox Home on an iPod Touch. I have not found a way to get into the 3 codes of four characters shown on my Win7PC on one of the other devices.

  Hello!

  If you have an account, but it seems that you are not logged in. Please, follow these steps:

  -Go to your tab sync in the Options window.
  -Press «Set up Firefox Sync»
  -Press half 'connect' down.
  -Select "I don't have the camera with me.
  -Now enter your contact information, including your sync key. And you're ready to go.
  -If you have lost your sync key, select the option below "I have lost my other device" and follow the instructions.

  I hope that this information resolves your issue.

• Why have none of my devices of storage is more recognized?

  My storage devices - camera, USB drive, backup hard drive - are no longer recognized by my laptop.   I tried them on another computer and they work fine. The mouse and the printer work well in all USB ports.  Everything was fine when I made a backup on 10/16/11, but more than two weeks now I tried to solve the problem.  I deleted a few upgrades of Apple who came after the date. I can see the devices in the Device Manager when they are plugged in and I tried the suggestions on the uninstalling and reinstalling the drivers and I tried to change the drive letter, but nothing seems to work. I tried to temporarily disable Norton and which makes no difference.

  Hello

  1. what happens when you try to connect to the USB, the camera and the hard drive?

  2. think you that USB detected in Device Manager?

  3. do you get an error message?

  4. have you tried to connect the devices on the back USB ports?

  Method 1: Create a new user account.

  Follow the steps to create a new user account and check if the problem persists.

  Create a new user account and check if the problem persists.
  Follow the link below to create a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  If the problem is resolved in the new user account, you may have corrupted profile.
  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   

  Method 2: Perform a system restore.

  I suggest you do a system restore while working much earlier.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Why anyone cannot repair vista print spooler errors?

  many 'experts' both 'fixes' so much useless information... I can't be alone in here... I tried every recommended around work
  of all the sites I find... and always impossible to add a printer on a vista 64 pc!

  Hello

  1. What is the exact error that you are experiencing when you try to install the printer?

  2. What is the model of the printer, and who is the manufacturer?

  3. What are the steps that you have tried to solve this problem?

  4 is this a wired or a wireless printer?

  5. is it a standalone printer or a network printer?

  6. What is the exact error that you are experiencing?

  I would like you to explain to me so that we can help you in a better way.

  Method 1:

  I suggest you follow the steps mentioned below.

  a. click Start> select Control Panel> in programs and features> select turn Windows features On or Off.

  b. click + sign of Printing Services.

  c. Select LPD and LPR. You must remove the Internet printing Client. Restart your PC to ensure there is no error in the spooler service.

  d. try to reinstall your printer software/driver.

  Method 2:

  I suggest to stop the spooler service, then restart and see if the problem is resolved. Follow the steps mentioned in the article below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3:

  If you use a network printer, then I suggest you follow the steps mentioned in the article below.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  See the links below.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• There is no communication between devices that are connected to the Linksys WAP4410N Wireless access point?

  Hi all

  I have deployed the new Linksys WAP4410N Wireless Access Point and it works fine. Laptop which is connected to the AP may be able to access the internet. It can communicate with AP and also the gateway IP (IP Router) but it is wireless devices are not able to communicate with each other. In the case of peripheral LAN can communicate with wireless devices. Cannot able to share files between wireless devices.

  Please help me solve this problem. Wat could be the problem here. Stage of Wat I have to take to eliminate this problem.

  Advance thanks.

  Thank you and best regards,

  Chandhuru.M

  Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

  The title of security without thread/how do you have isolation set up wireless?

  Insulation wireless (SSID) on the inside must be disabled to allow the computers associated with the same SSID to see and transfer files between them wireless

  Thank you

  Eric Moyers. : | :. : | :.

  Cisco Small Business U.S. STAC Advanced Support Engineer

  CCNA, CCNA-wireless

  866-606-1866.

  Mon - Fri 09:00 - 18:00 (UTC - 05:00)

  * Please rate the Post so other will know when an answer has been found.