Satellite L300-217 - connection to the Bravia KDL - 40EX503 LCD TV

Similar Questions

• After standby mode Satellite L300 cannot connect to the internet

  Hello

  I have problems with my Satellite L300, if I put the laptop to sleep it disconnects from the internet and when I try to continue later, he said that there are no wireless networks.
  The only way I can connect again is to restart my laptop. Can someone help me please?

  Thank you

  Hello!

  I have a Satellite L300 too but I can t view such a question because I often use the Hibernate and the day before.

  In any case, I think you should try to install the latest driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before installing the new version, you must delete the old first and then reboot the laptop. After that, you can install the latest version.
  And if it doesn't work, you must update the BIOS that you can find on the Toshiba site too.

  Good bye

• Satellite L300-1AQ - connection to the TV using the component cable 3RCA

  Just got the cable above EBAY - there the 15 pins would be "connector that fits outside the computer socket and on the other end 2 type records 'phono' (red, green and blue).

  Problem is that I can't make it work. My medion LCD 32 '' has the colorful entries and I tried all the external input options, but not luck. The laptop says cable provider must support "component video out" but nowhere is no reference to that in the literature of my laptop.
  Help please!

  All that happens when I connect the laptop to the TV is the change display resolution the TV says "no support". Yes, I tried all the options output of F5 also.

  Hello

  Just a question: your external monitor or TV has a such 3RCA component of entry?
  As far as I know not all monitors have these ports.

  You should maybe use a VGA to S-video or Composite adapter and try again.

• Internet via the Bravia KDL-32EX710

  Hello dear colleagues,
  We bought the TV Bravia KDL-32EX710 and connected through a router to the internet, but the problem is that I get an error "server list cannot be updated. Can you please give a hint how to solve this and this that features this TV to Internet (I guess that access to social networks such as Youtube and so on).
  Additional information: the network connection to my internet is ok: I checked Bravia KDL-32EX710 gets correct DHCP configurations and I recorded on a network gateway queries DNS of Bravia KDL-32EX710, I also connected computer to this cord - connected to the Bravia KDL-32EX710 and I can access the internet from this computer through this cord. So I guess that some configurations of addition are needed on the Bravia KDL-32EX710. Fill please how to watch this type of Internet TV content.
  Thanks in advance!

  I found the solution: the first step - is to record a TV on internet.sony.tv with code that TV displays, so TV access all the features of the internet!

• Satellite L300 - icons moved to the left

  All the icons on the function bar, Satellite L300, have moved to the left. Tried to bring back to his normal position with the mouse, but failed.
  What can I do?

  Thank you

  Hey Buddy,

  Hmm... What icons tell you exactly? Do you mean the desktop icons?
  If Yes, you can move them using drag and drop. That s pretty easy.

  By the way: what operating system you have?

• Satellite L300 PSLB8A reconnect to the net after log off or stop

  My son has the L300 that connects to the network wireless to the router in another room.

  When it disconnects, or stop, the next time it starts it loses connectivity.

  I am able to get it reconnected in connecting the router and reconfirming the setting, but it's tedious and quite often does not work.

  His laptop computer often shows that it is connected but slow. I can't find a reasonable solution to all this.

  It is not a problem with the signal that I have placed the right of the laptop next to the router, but still the same problem.

  Any help, clues you can give will be greatly appreciated

  Hello

  Have you tried a new Wlan driver?
  You should definitely update the driver

  I have no idea what you have the WLan card but this Toshiba WLan driver page provides all possible drivers of the WLan for Atheros and Intel cards
  http://APS2.toshiba-tro.de/WLAN/
  You can also try updating the BIOS is an is available

  Just a note: my laptop has Atheros WLan card and I m in order to establish the connection using the Atheros WLan configuration tool
  It automatically connect my laptop to the Wlan

• Satellite L300 Wireless icon has the Cross Red but connected - SOLUTION

  Satellite L300. Home Premium Windows 7 32.

  Updated the wireless driver Atheros to the download area of Toshiba (the newest driver released on 11/27/11). After the reboot, the icon in the notification area wireless shows with red cross through it even if it is connected. Not a big deal but annoying.

  Corrected by:
  (Note: you must take note of your routers WEP key before doing this and if SSID is not it broadcasts)

  1. go on the network and sharing Center
  2. click on manage networks wireless on the left-hand menu
  3. highlight your connection and remove it.
  4. stop and restart the network connections service (to go to the Services console right-click on computer in the start menu and click on manage.) Expand Services and Applications, click Services).
  5. reconnect to your network by choosing from the list of available and entering the WEP key (or use him manually add... option if you must enter the SSID).
  6. If still the same then restart and reconnect to your network.

  Worked for me.

  Alternatively you can try of course to roll back to the old driver.

  Thank you much for sharing this info with us!
  Perhaps, it might be useful to other people here in the forum!

  Great post!

• Satellite L300 not connect to Netgear router

  Hi, I wonder if someone can help me.

  I recently installed a Netgear wireless home router. Although the Mac laptops and iPod in the House have all connected without any problems my Satellite L300 (PSLB8A-0VK004) is not.
  Curiously however Island L300 connects to a public network wireless outside my house without any problem.

  I have contacted Netgear, and they tried many things with me by phone. One of the operators of Netgear said it was a well-known problem of them and that he had a problem with Vista. They said I had to download Service Pack 2 for Microsoft (which I did) and the last 'Wireless drivers from the Web from Toshiba site'.

  I went to the Toshiba Download Center, but the drop-down list, it provides does not my laptop from its selection model. Also if I manually scan through the list of available downloads, I see those who are "Netgear Wireless Drivers".

  Can someone tell me where I can find these drivers?

  THX

  I think you Australian mobile phone model.
  Have you checked Toshiba Australia support and download page?

  Here is the link - http://www.mytoshiba.com.au/

• Satellite A100-784 - connect to the TV via a HDMI cable

  Hi friends,

  I have a Toshiba Satellite A100 - 784 PSAANE. Its a product abandoned now :-( I wonder if I can connect this laptop with the Sony Bravia LED TV via HDMI cable.
  I'm not able to find if the laptop is compatible for it.

  Please help me a way to find a solution to connect the led TV and how to do it? Please also help with the cables needed for the same thing.

  Sorry guys, I'm quite naïve HDMI company.

  Thanks for all the help,

  Kind regards
  Perkins

  Hey Buddy,

  What do not know exactly?

  The laptop has only VGA and S-Video output port but no HDMI port. So that you can t connect the laptop to the TV because you can t connect the HDMI cable to your computer.

  If your TV is VGA or S-video port, you can use this cable. After the connection to the TV, press the key combination FN + F5 to switch between monitors.

• Satellite L300 PSLB8E - connection WLan keeps falling

  Hi all

  Have gotten my Satellite L300 PSLB8E some 2 months ago and since the first day (RTL8187b) wireless is having serious problems.

  Continuous wireless connection drop if other phones that I use at home are very good.
  LAN on the same Satellite works fine as well, it's just wireless problem with this particular machine.

  I have tried to restore the system, using recovery discs, tried every possible update Toshiba as Realtek, but problem remains intact.

  Help, please!

  Mustafa

  Hello

  What version of BIOS you have on your laptop?

  There is a version v1.8 of BIOS on the European driver Toshiba page.
  Check if you have a lower version. If so update!

  In addition, I would recommend WLan driver download Realtek page:
  http://www.Realtek.com.tw/

  You can find the most recent driver.

  Last but not least that it would be a good idea to verify that the settings in the Panel-> WLan card properties-> Advanced tab.
  Here you can change the encryption, the channel and the power saving settings.
  I recommend turning off the energy-saving WLan card.

  You should also update the Vista of the State. I read that Vista has caused a lot of issues that have been fixed with the latest patches and fixes.

• Satellite L300-1AS: connection WLAN don't Comeback

  Hello

  I'm having a problem of wireless network card. If the connection goes out, it never came (manual/automatic), unless the computer is restarted.
  Is there a solution to this problem?

  Thank you

  Jay

  Hello!

  Do you have the BIOS and latest drivers? Search on Toshiba website and install it:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I have a Satellite L300 and have no problem when I lose the connection. It takes a few seconds and back.

  Good bye

• Satellite L300-1AQ connection to Toshiba Regza 37 '' LCD AV series 37AV505DB

  I think buying the Satellite L300-1AQ, how will I be able to connect to my Toshiba Regza 37 '' LCD?

  The LCD has no HDMI VGA port only 2, is a Toshiba laptop equipped with an HDMI port?
  What is the most cost-effective way on the connection of all laptops Toshiba to my LCD TV?

  Thanks for your help...

  Hello

  AFAIK the L300-1AQ supports only RGB (VGA port) port.
  This port provides only the analog signal and I doubt that you will be able to connect to the HDMI port because you cannot convert an analog signal into a digital signal.

  I put t know the other ports that is supported by the Toshiba Regza LCD 37 ", but I think that in this case, the HDMI port is not useful.

  Good bye

• Re: Satellite Pro A40 - connection to the local network

  Hello

  My names Andy and not bieng a total beginner computer, I tried to install all the drivers for my laptop model a SPA40 old fathers PSA45E-001VM-EN. (European model I think) everything looks ok, except that I can't get the ETHERNET driver.

  When I go into the Device Manager there is NO controller network displayed in the list and there is a yellow exclamation mark against two controllers ethernet ib the OTHER DEVICES tab looking here, I downloaded the atheros wlan xp file - 7704062.zip, broadcom wlan xp - installed 5604835.ziplan20070912134727.zip and nothing changes, we used to be able to go on the net and with the wifi card in the pci slot wireless go so I know its capable I think it's just the order of drivers and the drivers themselves,

  Then someone can point me in the right direction before as I have send myself crazy with this...

  You can

  regards and thanks in advance

  Andy

  Hey,.

  The drivers that you downloaded are WLAN Card and has nothing to do with the connection to the local network (Ethernet) normal

  I think you should check the Web from Toshiba site to download the latest LAN driver. You can find the drivers for Satellite Pro A40 in * archives *.
  ttp://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp h

• Satellite L300 - how to accept the Tempro privacy policy?

  Hello

  My utility to update version 1.x Tempro on Vista was working fine, until I did the Tempro v2.2 upgrade and now it is stuck: it says "waiting for confidentiality to be accepted. I click on 'View and accept' and a new privacy policy Tempro window opens and I click on accept
  Then a DOS window opens - TemproLanucher.exe - but it just gets stuck it (white) and will eventually close to return to the first screen "in expectation of confidentiality is agreed" again.

  Someone knows it please any way out of this loop?
  The firewall of windows Vista SP2, Satellite L300, (off does not help), no anitvirus, also I did the upgrade of the proposed too BIOS

  Thank you very much!
  John (UK)

  Hello

  Everything works well, read this thread

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54945&TSTART=0

• Satellite L300. Observation on the issues cover the recovery of Vista on a new HARD drive

  Hi all

  I need to reinstall Vista (on a Toshiba Satellite L300) runs the "recovery disc" created by Toshiba disc creator before recovery and using a disc of "nine" (Toshiba MK2035GSS, 200 GB).

  Issues related to the:

  (1) I have to partition and format the new drive before starting with recovery disks / DVD (s).
  or which will be done through the recovery process?

  (2) what is the reason for which the current disc is divided into two size equal C: and D: partitions, while
  D: partition seems to be reservered for the system, but only 5 GB are used?

  (3) what is the purpose of the partition 3. ("inactive") with about 1.5 GB of space?

  Thanks in advance for your support and help!

  Whalter

  > 1) I have to partition and format the new drive before starting with recovery disks / DVD (s).
  or which will be done through the recovery process?
  No, because the HARD disk should be formatted during the recovery process.

  (> 2) what is the reason for which the current disc is divided into two size equal partitions C: and D:, while
  D: partition seems to be reservered for the system, but only 5 GB are used?
  On the D partition, you can find the files and folder from HARD drive recovery. HARD disk recovery allows you to recover the laptop HARD drive and in this case, you don't need the recovery disc

  (> 3) what is the purpose of the partition 3. ("inactive") with about 1.5 GB of space?
  It is a Vista partition and is necessary for the backup files. Vista is able to repair the operating system if something bad is going to do this the necessary files that are stored on this partition.