Satellite P100 - 442 PSPAAE - Bios Update

Similar Questions

• Satellite P100 - 160 PSPAAE Vista: all my Toshiba Utilities stopped working

  All of my Toshiba Utilities stopped working.
  Message appears saying "* stopped working" windows is looking for a solution.

  It was after that updates have been installed in the correct order as posted earlier in the forum. Not only the value added package configfree as well as PC diagnosis, etc.

  I have a Satellite P100 - 160 PSPAAE under Vista Home Premium.

  Any ideas? I think that perhaps is McAfee Security Center has something to do with it.

  Hello

  I suggest the following: recover your machine and update tools and drivers again. I don't know if McAfee is the cause of your problem, but if a system is broken on the software side, then, among the most popular and useful actions is to restore the system, and then being happy when it works again.

  Would appreciate comments on your success.

  Welcome them

• Crashes BSOD and Satellite P100-160 PSPAAE

  Hello

  I own a toshiba satellite p100-160 PSPAAE

  I love my laptop, but I had nothing that trouble with it since I bought it a year ago

  I have insurance but my insurance claim there is nothing wrong with it and fix it the custom (tech guy)

  I get blue screen errors and then it crashes, it s happening more and more often, especially when I turn on my laptop.

  It is never used for whatever bad happens normally randomly about 7 - 8 times a month, now it every time I turn on my laptop, after that it restarts its ok again.

  Here are some of the stop codes that I get)
  BCCode: a
  BCP1: B27E4B16
  BCP2: 00000002
  BCP3: 00000000
  BCP4: 81C92FC1

  2)
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81C7B7A9
  BCP3: ADEA7A74
  BCP4: 00000000

  3)
  BCCode: 4th
  BCP1: 00000099
  BCP2: 000405F5
  BCP3: 00000007
  BCP4: 00000000

  4)
  BCCode: 1a
  BCP1: 00041284
  BCP2: A5BCC001
  BCP3: 000055ED
  BCP4: 87 00000

  5)
  BCCode: 23
  BCP1: 000E0100
  BCP2: A81D66C4
  BCP3: A81D63C0
  BCP4: A81D677F

  6)
  BCCode: d1
  BCP1: A3B653E8
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 8C9E8E5E

  7)
  BCCode: 50
  BCP1: 80000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000

  I formatted my laptop about a month ago and have already 15 blue screen errors, my memory is ok, I let my phone update of its self.

  Please help me, I'm thinking that it my motherboard, but I'm not an expert, when its not to crash it works very well, had a few other problems.

  Sorry, it's really long to read but I don't know what to do, thank you

  Hi Sarah,.

  I suggest formatting again and see what happens. You have also all updates installed (Vista SP1 if you are running Vista or XP SP3 if you're running XP?).

  Hope this helps

  Neo-Tech :)

• Satellite P100 loses its next update

  Satellite P100 V3.30 Sound BiOS: Conexant HD Audio v 4.8.0 Windows Vista 32 bit

  Following a Vista Windows Update which contained an update of his Toshiba, all sounds have disappeared from the laptop. I did a system restore to before the update sound, and the sound is back.
  Update details: Conexant - Audio - Conexant high definition Smartaudio HD2. (The current sound details: conexant HD audio v 48.0)

  The sound went twice already, back after a re - install, although I only made the possible link with the update.

  Please advice!

  My advice is: do not touch the well-executed system. I have Satellite P200 and I don't do any driver updated or upgrades. If everything works should well, why I do this?

  Good bye

• Satellite P100-160 (PSPAAE-01D00UEN) - upgrade processor

  I currently have a Satellite P100-160 part number: PSPAAE-01D00UEN. Is it possible to upgrade the processor in this machine, I find it very slow in the graphics work I do.

  Any other suggestions as to speed up the machine would be greatly received.

  Thank you

  Ian

  Hi IanGreen,

  A CPU upgrade is not possible, or let s say not supported. All that is supported is the preinstalled Toshiba CPU. If you want another CPU, sometimes at your own risk. Probably the motherboard, BIOS or chipset is not able to handle this or the cooling module is not good enough for faster CPU

  Anyway, your laptop is not the most recent, and if you need more performance, you should look for a new model ;)

• Re: Satellite P100-160 (PSPAAE) - support 4 GB of RAM?

  Hey guys,.

  I was wondering if there was any way I could v4.70 BIOS to support 4 GB of RAM? I am running Slackware 13 x86_64 and still not get my installation to reveal the true amount of RAM installed. It displays all of the RAM in BIOS. Here is the output of/proc/meminfo...

  root@drgr33n ~/Software/64pkg $ cat/proc/meminfo
  MemTotal: * 3081500 kB *.
  MemFree: 535712 kB
  Buffers: 438504 kB
  Cache: 1131636 kB
  SwapCached: 0 kB
  Active principles: 1179124 kB
  Inactive: 1051940 kB
  Active (Anon): 754716 kB
  Inactive (Anon): 0 kB
  Active (leader): 424408 kB
  Inactive (queue): 1051940 kB
  Unevictable: 0 kB
  Mlocked: 0 kB
  SwapTotal: 0 kB
  SwapFree: 0 kB
  Sale: 308 kB
  Writeback: 0 kB
  AnonPages: 660920 kB
  Mapped: 144520 kB
  Slab: 205584 kB
  SReclaimable: 179052 kB
  SUnreclaim: 26532 kB
  PageTables: 20064 kB
  NFS_Unstable: 0 kB
  Bounce: 0 kB
  WritebackTmp: 0 kB
  CommitLimit: 1540748 kB
  Committed_AS: 1617896 kB
  VmallocTotal: 34359738367 kB
  VmallocUsed: 558552 kB
  VmallocChunk: 34359120235 kB
  HugePages_Total: 0
  HugePages_Free: 0
  HugePages_Rsvd: 0
  HugePages_Surp: 0
  Hugepagesize: 2048 kB
  DirectMap4k: 6720 kB
  DirectMap2M: 3129344 kB

  root@drgr33n ~/Software/64pkg $ dmidecode - type memory
  # dmidecode 2.10
  SMBIOS 2.4 present.

  Handle 0x000C, type of DMI 16, 15 bytes
  Physical memory
  Geographical area: motherboard or motherboard
  Use: System memory
  Type of Error Correction: no
  Maximum capacity: * 3 GB *.
  Handle error information: not provided
  Number of aircraft: 2

  Handle 0x000D, DMI 17 27 bytes
  Device memory
  Handful of table: 0x000C
  Handle information error: no error
  * Width: 64 bits
  * Data width: 64-bit *.
  * Size: 2048 MB *.
  Form factor: SODIMM
  Value: 1
  Location: M1
  Index of the Bank: Bank 0
  Type: DDR2
  Type Detail: synchronous
  Speed: unknown
  Manufacturer: Unspecified
  Serial number: not specified
  Inventory number: not specified
  Part number: not specified

  Handle 0x000E, type of DMI 17, 27 bytes
  Device memory
  Handful of table: 0x000C
  Handle information error: no error
  * Width: 64 bits
  * Data width: 64-bit *.
  * Size: 2048 MB *.
  Form factor: SODIMM
  Value: 1
  Location: M2
  Index of the Bank: Bank 1
  Type: DDR2
  Type Detail: synchronous
  Speed: unknown
  Manufacturer: Unspecified
  Serial number: not specified
  Inventory number: not specified

  As you can see the BIOS, see the two sticks of 2 GB, but it also shows that the BIOS supports only 3 GB of RAM? Would it not possible to Flash my motherboard with the firmware of another model of laptop computer? Or is there a BIOS update in the near future that will allow me to make use of my full 4 GB of RAM?

  Hello

  Normally, the Satellite P100-160 supports 4 GB of RAM. If you check the user manual, you can find this information it can be upgraded to 4 GB of RAM with two 2 GB memory modules.

  Just a question: how much will be shown in the BIOS directly? He acknowledges the full 4 GB of RAM?

  And don t forget you can only use 4 GB of RAM with a 64 bit OS. If you use 32-bit OS, you can only use up to 3.2 GB of RAM.
  Have you installed Linux 64-bit version?

• Satellite A110 - 180 PSABOE - Bios update failure

  Hello.

  I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop does not start because I think I lost the bios of programming. I test this http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-S4747-Bios-update-failure/m-p method but the laptop will beep 3 times every 2 seconds without stopping and with black screen only. The CD-ROM unit tries to start but that's all.

  If anyone knows a separate solution that replace the motherboard, please tell me to probe it.

  Thanks for your help.

  > I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop doesn't start

  To me, it looks like the BIOS update procedure has no
  I'm afraid you have no other alternative besides contacting an ASP using m.

  It seems that the ROM module is not flashed on the correct order and the technician could try to relash Rom module with a BIOS version of crisis

  I would recommend contacting the local ASP in order to solve this problem

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite C660 - 13r PSC0LE - BIOS update problem

  I bought the Satellite c660-13r 11.05.2011

  After installing and configuring Internet conection, only he had messages on the Bulletin Board, NEW BIOS update the bios of the laptop of TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 without any problem,

  NOW I HAVE A BIG PROBLEM.
  1 POST takes 30 sec,
  2 start windows is slow
  3. laptop is so slow I can cry!
  4. when I open the new window or klick simply open the new link, stay for 3-4 sec

  and I must ask, how is this posibile, when I open HWSetup, in the menu start-> toshiba-> utilytis
  I can see the BIOS. 08/04/2011 I can send screenshots of version 1.40

  How can I flasch BIOS with other versions,
  His big problem to work

  Thank you and I hope you can help me...

  Hello

  The version of the BIOS should be mentioned in the BIOS settings.
  Turn on the device, press F2 and verify the version here.

  Also I recommend the settings of the BIOS back to default settings.
  In the BIOS settings, you will need to press F9 to get the default value. Then save the changes and exit the BIOS.
  Restart the machine and check how many processes are running in the context of the BONE.

  I recommend disabling of certain non-essential processes in msconfig.
  There, you can go to the Startup tab and could uncheck the unnecessary process.

• Satellite C855 - 19 X - BIOS update problem

  Hi all

  I have a Satellite phone C855 - 19 X and the alert tempo TOSHIBA utility prompts me to update my BIOS. However when I am doing so I get the following message

  "Error".
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1"

  Does anyone have any experience with this kind of problem? Should I add this parameter, or is otherwise around it? Because the BIOS will be affected I hesitate to do so.

  Thank you in advance.

  Hello

  First of all, you should know that the update of the BIOS is a sensitive technique and using wrongly you can damage the motherboard. So be sure to always update the BIOS.

  Second, the update of the BIOS is not quite necessary in case your laptop runs correctly.
  You have problems using the laptop? Isn't it? Well, in this case I wouldn't touch the BIOS.

  However, the error message is telling as secure boot
  Secure boot is an available option in the BIOS settings. You should probably disable secure boot before running the BIOS update file.

• Satellite P100 - 160 PSPAAE - memory upgrade question

  Hello

  can someone tell me if it works in my Satellite P100-160
  Part number: PSPAAE-01D00UEN

  Kingston memory - 2 GB - SO DIMM 200 pin - DDR II
  Storage capacity 2 GB
  Upgrade to generic Type
  DDR II SDRAM technology
  Factor of form SO DIMM 200-pin
  Memory speed 533 MHz
  Verifying the integrity of data Non - ECC
  Latency CL4 Timings
  Features without buffer memory
  Supply voltage 1.8

  Thank you
  TREV

  Why not?

  Satellite P100 supports the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules of the series.

  You can switch to 4 GB max.

  See this page:

  [Memory for Toshiba Satellite P100-160 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=28327&ft=m&st=3]

  You will find compatible module.

• Satellite M40 - 307 (PSM44E) BIOS update

  Hello
  I'm actually having a satellite M40-307 with a BIOS version 1.2.
  Many of them came with BIOS v.1.3.
  If someone is having a 1.3 or a higher version of BIOS, I want to send him a Toshiba util to send me its firmware.

  Concerning

  Hi Etienne

  Don t think that a series of Satellite M40 PSM44E were shipped with the BIOS 1.3 or higher.
  Series only the BIOS 1.2 is available for the PSM44E. It s on the page of the Toshiba driver.

  Of course, you will also find an other BIOS updates; v1.7 and v2.0
  But these versions are released for other Satellite M40 series and are not compatible with the Satellite M40 * PSM44E.*

  Welcome them

• Satellite L670 - 1 FT Bios update failed

  I have a laptop "Satellite L670 - 1 FT" computer when the update of the BIOS does not.
  There is a possibility of screen WITHOUT doing a BIOS update, and if yes what do I need?

  I tried to copy the BIOS file. ROM on a USB key and start the laptop by pressing Fn + B.
  It takes about 5-10 sec for the stick, but unfortunately I still have no display.

  Thanks in advance

  + The message has changed: the content has been translated.

  If the BIOS is not successful, the ROM module must be flashed with special crisis disk BIOS
  Unfortunately, as far as I know something like this can be done by a Toshiba authorized service provider available in your country.

• Satellite A500 emit after bios update 1.50

  Hey guys and girls,

  I have some problems after the update of the bios. Before the update my laptop has been the scene of much smoother and everything was fine and dandy until Tempro told me to update my bios. The problem is that after the update, the temperature seems to be considerably higher as usual when I play the game (I am a gamer) and also all the games I play seems to be much slower than before (lower, gal frame rate). Before the update I could play Dragon Age Origins with 1366 x 768 with 4 x anti-aliasing and the only one that I could get the same performance with the graphic parameter above is on 800 x 600. Now, it is certainly a big problem for someone who is a graphics junkie when it comes to games.

  * What do you think I should do? *

  A. downgrade my bios for when I bought everything first? (I don't know what version of bios is if anyone knows the stock bios?)
  B. perform HARD drive recovery?
  C. clean install of Windows 7 64-bit?

  My laptop computer spec:

  Model name: Satellite A500
  Part number: PSAR3E-00N005EN
  Serial number: X9206227K
  OS version: Windows 7 64-bit Home Premium edition
  BIOS version: 1.50
  Physical memory: 4096MB RAM
  Graphics card: NVIDIA Geforce GT 230 M

  Any help with this is greatly appreciated.

  Post edited by: Poyzen

  Hi mate

  I think you had a version of BIOS 1.30
  In older versions of the BIOS update are not available on the Toshiba driver download page. Only ASP (partner) has access to these early BIOS versions

  In any case, I found an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577

  Not sure if it could be useful but check

  PS; the graphics card driver update is a good idea it too check

• Re: Satellite C660 - after cooler BIOS update speed is increased and troubling

  Good evening
  Five hours ago, I did update the BIOS and restart the computer after that I noticed that the speed of the cooler is increased and worrying. Mention that they bought a Toshiba Satellite C660 last month.
  Please, if you can help me how to set the correct rotation!

  Thank you!

  PS: Sorry for my English I'm not from England!

  I think several people have posted about it here on this forum so it's a shame you don't l l check this forum before you took the decision to put the BIOS updated. If you have some time check other assignments in category C satellite.

  In any case, I can say, it's that you can try to reduce the speed of the cooling fan with cooling method option in the advanced power settings.

  This should reduce the speed of the cooling fan and your laptop will work a lot quieter. Put simply to option in battery mode.