Installing Dell TL2000

Similar Questions

• Current firmware for Dell TL2000

  Hello:

  I have a Dell TL2000 tape drive and I would like to know what current firmware is available for my device.

  Here is what I am running.

  Currently installed firmware library	C.00 / 3,20e
  Revision of the Firmware bootcode	0.80

  Vendor ID	IBM
  Product ID	ULT3580-HH4
  Serial number	1068062128
  Version	2
  Firmware revision	D2AS

  I think that the current library firmware is C.30, but I don't know which drive firmware should I install to the drive itself.  When you download the latest firmware, it provides you with all the firmware for all readers.  Should which firmware I install to the drive that I listed above?

  Thank you.

  Hello gshadley,

  Here is a link to the latest firmware for your TL2000. http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/PowerVault-TL2000?driverId=5VDYP&osCode=WNT5&FILEID=3327558851&LanguageCode=en&CategoryID=Ta

  The latest news from the library is C.30

  Later, for your tape drive which is a LTO4 HH = D8D5

  Please let us know if you have any other questions.

• Installing dell openmanage 6.1 on esxi 4.0 (released).

  I noticed that dell management is available for download:

  Dell OpenManage VIB for ESXi 4.0

  http://support.Dell.com/support/downloads/download.aspx?c=us & l = in & s = gen & releaseid = R227503 & SystemID = PWE_R905 & servicetag = & os = ESXi & osl = in & deviceid = 21859 & devlib = 0 & typecnt = 0 & vercnt = 1 & catid = 1 & impid =-1 & formatcnt = 1 & libid = 36 & 326356 = starts

  On the directions of installation, it lists:

  Customized for oem-dell-openmanage - esxi_6.1 - 0000.zip instructions:

  ##################

  1) download the appropriate package of RCLI (Remote Command Line Interface) of http://www.vmware.com/download/ If your system runs on Microsoft Windows or Linux.

  (2) copy the Dell OpenManage bundle into a directory on your system.

  (3) use the vihostupdate command. If you use Microsoft Windows, navigate to the folder where you installed the RCLI utilities to use this command. If you use Linux, this command is installed when you install the RPM RCLI.

  (4) run the command Vihostupdate - Server-I - b.

  (5) the output of the command shows a success or a failure update.

  You must enable OEM CIM providers on VMware ESXi 4 system after installing Dell OpenManage package to manage a system with Dell OpenManage Server Administrator.

  With vSphere Client to allow CIM OEM suppliers:

  To allow CIM OEM suppliers using VMware vSphere Client, you must have the vSphere Client tool installed. You can download and install the tool of http://where is the IP address of the VMware ESXi system 4

  To activate OEM CIM providers on the vSphere Client VMware ESXi 4 system:

  (1) log on to the VMware ESXi 4 system where vSphere Client is installed.

  2) click on the Configuration tab.

  (3) pursuant to the software section on the left side, click Advanced settings.

  (4) in the Advanced Settings dialog box, click on 'UserVars' on the left pane.

  (5) change the value of the field "CIMOEMProvidersEnabled" 1.

  6) click OK.

  (7) reboot your system for the change to take effect. Use the summary in vSphere Client tab to restart the system.

  ##################

  So I downloaded the zip file.

  Put the system into maintenance.

  Attempt to update via vihostupdate.pl, which gives the error:

  e:\oem-Dell-OpenManage-esxi_6.1-0000.zip unpacking...

  Metadata.zip.SIG does not exist

  signature mismatch: metadata.zip

  Unable to decompress the package update.

  I checked that the zip files are valid.

  I'm patching of a windows 2003 System. I'm under esxi build 175625.

  Ideas?

  It seems that the cim hp patch has the same question:

  http://communities.VMware.com/message/1307359#1307359

  Nice to hear that

• Error code: Trying 80072F8F update windows after fresh install - Dell Vostro 1510 - (Windows 7 x 64 PRO)

  Hello, I'm trying to update windows after installation and I get error code 80072F8F.  After looking for other pages, I checked my BIOS date and time are correct and Windows as well.

  Laptop: Dell VOSTRO 1510
  Windows 7 x 64 PRO

  I already activated Windows (silly me to check everything actually works) and I need a solution as soon as POSSIBLE.

  I needed Windows update to try and fix a number display adapter (card intel not giving not external display resolutions)- but that's another question.

  I hope that there is a fix out there somewhere in the ether.

  -Giant_Cheeseman

  No anti-virus installed at the present time, no anti-spyware, no firewall.

  Repost: What were the problems you are experiencing that you thought that a "new facility" could solve?

  The foregoing notwithstanding, and since you neglected to install an antivirus application...

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp cannot install dell printer

  uninstalled printer tries to install the update of readers had saved in the folder on the desktop, but he wants to install drive is c:\dell\drivers\r109906

  Hello

  1. What is the exact error that you receive when you try to install the latest drivers for the printer?

  2. why you have uninstalled the printer?

  3. What is the number of the printer model?

  You can follow these links and check if the problem persists:

  To add a printer attached to your computer

  To install new or updated printer drivers to update

  Hope the helps of information.

• Installing dell aio 944 on vista and linksys printserver wpsm54g, installation after the installation wizard

  After installing linksys printserver wpsm54g with my printer dell aio 944 on vista, vista said it still need the installation driver for wireless printserver even if I finished the whole plant without problem.

  1. install the linksys with the cd print server

  2. after the computer restarts, reinstall your printer driver by downloading from the dell web site and use the driver installation network. 3. restart your computer again and use the printserver utility and click on log in your lower right corner of the utility on the start bar. You are now finished! PM me if you need help.

• I want to know if you can install Dell windows 7 into a vista HP

  I have a HP with vista on it and I would like to install Windows 7... but the only one I have is a new Dell I.  Will this work?

  Nope. It is OEM and tied to the computer, with which he came. You can buy a copy and license.

• 8.1 recovery problem and install dell backup and recovery software Windows...

  I switch my windows to 8.1, the problem is that I can't install Backup Dell & recovery, when I install and update EP I get FACTORY SETUP ERROR 5

  is it techniques help me please... thx

   

   

  However... their valuation of cant or reset my laptop back to the original image...

  

  just like this picture...

  recovery turn... Refresh also cant...

   

   

  just similar, even with my problem, my only factorysetup error 5, I think that its different...

  However, my recovery of uninstalled software, because installed new version need to uninstall the old version, after that it cannot install the new version...

  then your laptop can start recovering or not? My only can't just show picture above...

• (Redirected) Cannot install Dell system Detect em

  I get the text following error when I try to install the dell system detects, I need in order to dell check my pc for problems.  I have trouble getting the Windows 10 app, and if I don't have the system detect it on my computer, Dell cannot determine what the problem is that I need drivers, etc..  What is the solution to this?  I can download the system Dell detects, but cannot open it, even with the permission of the directors.

  Hi pwbernedell,

  Please repost this in the Windows operating system support forum 10.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• I want to REMOVE pre-installed Dell program Sync Up.

  Hello

  I never used and do not always hear using the Sync software on my Dell laptop. I want to know if there is anyone with enough know-how to REMOVE it completely from my system. Key word: DELETE. I don't want it to exist on my computer at all. I want to REMOVE it. I don't want to turn it off I want to REMOVE it. If you can not tell me how to REMOVE it then don't post because you are not answering my question either. I have read and felt the frustration of many others trying to get this resolved and they only got shit 'answers' (they were not answers if they offer something that the user did not like to turn it off). If you are trying to suggest / tell me something that is not completely REMOVE the crapware from my system, I'll probably do panic.

  Thank you

  Gabe

  Hi Gabe,

  Please share the system model and the installed operating system. Assuming that you are running Windows 7, you can follow the below mentioned steps to remove it:

  • Click on Start -> Control Panel -> programs -> programs and features -> uninstall a program.
  • Select the application you want to uninstall and click Uninstall.
  • Follow the on-screen instructions to remove the application.

  If the step above does not work, you can install Revo Uninstaller Pro from the link http://www.revouninstaller.com/. Install it on your system, and use it to uninstall the app Sync Up. The operating instructions are shared under the section How To manuals and videos. This should completely remove it from the application of the system.

  Note: It is a third party application, Dell cannot support or sponsor this application.

  Answer please if you have any questions. I'll be happy to help you.

• I installed Dell Windows Vista on the Vaio, I can't do the drivers and software

  I have the Sony Vaio VGN-CR220E Vista Home Premium was pre installed on. I had to reinstall and borrowed A friends Dell CD. Nothing works right. How can I get the right programs for my Vaio

  It does not work like that

  You cannot use a disk from Dell on a Sony Vaio.

  http://eSupport.Sony.com/en/VAIO

  Here are the General news for the recovery to factory settings:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install Dell OMSA on a free host VMware or VMware vSphere Hypervisor comments?

  We are virtualizing our 2012 R2 Windows Server and you have a Dell PowerEdge T310 server. We have installed vSphere hypervisor free version 5.5 on the physical server.

  Does anyone know how to install the Dell OMSA? I heard that it will not work if it is installed on the Windows Server R2 2012 host because of the virtualization layer.

  I read a few posts on how it's done, but I can't always get my head around it. I think I've also seen people install a VIB on the hypervisor vSphere itself?

  Can you please describe the General steps or point me in the right direction on how to run the OMSA? The Dell PowerEdge server has a RAID, and we must use OMSA to see a RAID controller unexpected sense errors if they are generated. We used to have a problem with consistency RAID and have had to start again before.

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Hello

  There are a lot of articles and posts on how to install OMSA under VMware. If you encounter problems then please post an explanation of what you are having problems with. Here's a post I did on the subject. It has a link to a youtube video that includes step by step instructions:

  http://community.Spiceworks.com/topic/403141-Dell-open-mange-in-VMware

  jeff0000

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Integration of OpenManage for VCenter requires always the OMSA agent must be installed on the hypervisor. Correct, it is not a free version of VCenter. No installation procedure who advises using VUM or VCenter should be ignored because you will not have access to these utilities.

  Thank you

• Hard to install Dell 966 printer

  Glad to find this forum. Thank you for making this service.

  Question is unable to re - install the print on the original disc driver, or a more recent version of the internet.

  Do this has occurred trying to get the printer added to the local network without wire or Win7 Homegroup.

  Material:

  Dell Inspiron 570, X 64

  BIOS A05 20/12/2010

  Dell 966 printer

  Service tag

  Code Express

  Difficulties to get the printer to join the homegroup or wireless router.

  NET activity light in the router port the printer was plugged at never blinked in all circumstances.

  Over group residential facility to be used between this PC and a laptop Dell Inspiron of Win7 has resulted no no recognition to the laptop. A PC RESTORE was attempted, resulting an error report Win indicating no RESTORE points were created, to establish a point, click the System Protection "." Clicking on another error showing for a new attempt because of a (OX81000203) SYSTEM RESTORE ERROR as a result.   Downloaded a new reader printer Dell, trying to successfully execute this didn't happen. Tried to re - install the original driver that does not work. Then found two drivers were installed. Attempted to remove all traces of any driver. Not a great success. Downloaded an own application outside and correctly install the original driver drivers. It did not work because the application reports no current driver parts.

  I know that it is now necessary get a clean install of good conductor new or old. This is where I am stuck. I keep trying but asking for comments in the meantime.

  Thank you

  Jim

  Attempts to get information about the operating system resulted in the same error.

  Jim,

  You have the Linksys set to use these parameters to the recommended wireless router I use channel 11. I have a new SSID to connect easier.

  AVG is probably going to be a problem with the connection to the wireless printer. I have these instructions, Allowing Wireless Printer blocked by AVG Firewall 8.0 , but you can disable AVG or uninstall AVG to install the printer. Once the printer is installed and connected to your network, using the wireless adapter, you can then try AVG reactivation/installation and if the justifications for the printer do not work, then the problem is with AVG.

  The printer connects ONLY on 2.4 GHz because of the b/g adapter has the printer.

  Installation instructions have been listed in a previous post and should work. Your desktop on your network, would be attached to a cable ethernet to wireless router, allows you to print to the printer wirelessly with no cable attached to the wireless printer.

  Let me know to what extent this time you are and that you need help, just ask.

  Rick

• No connectivity after installing Dell 1702 Driver for Wireless Adapter - of the suggestions?

  Hello world

  I'm completely confused on this one and at my wit's end.
  I have an Inspiron laptop M5110 and some difficulties to stay connected to my internet so this morning I decided that I would try to update the drivers. I uninstalled the Wireless and Blue Tooth drivers and reinstalled them, but now it will not even TRY to connect at all. In the lower right corner, there is a red x on the wireless bars and says No connections are available. Previously, it would have a circle of rotation while trying to connect, but that is more than all. My Ethernet connection works fine, I even uninstalled and reinstalled this driver (REALTEK) and his work with no problems. So to publish its specific wireless card...

  If I run IPCONFIG, the wireless card isn't even more appear. I tried to reset, deactivation, all I could think about. I tried several versions too many drivers, but nothing works.

  Right now, I removed it, so I have a yellow exclamation next to the network controller in my device settings. My hardware for the adapter ID is PCI\VEN_168C & DEV_002B & SUBSYS_02051028

  I think the info above, I believe that the Atheros wireless card belongs.

  Have any suggestions at all as to how I can get this thing to even try to connect to a network? I'm dead in the water... ANY idea would be so appreciated. I can stick captures screen or something else, if you think it would help.

  Thank you all,

  Tim

  Timmy1028,

  Zone Alarm because of the systems do not connect. Not very good if you want to continue your connection is allowed, or if you have a product key, for your subscription, temporarily uninstall Zone Alarm.

  The Dell Wireless 1702 802.11b/g/n connects to 2'4 GHz ONLY.

  Places to look to see if your connection is activated

  Also try reading, How to repair a connection

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Click Advanced. Look and see if this adapter has Antenna Diversity. If the adapter Antenna Diversity, change from automatic to the auxiliary voltage (can you also tell me if there or that it has no Antenna Diversity for my notes.) Thank you)

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• How to install Dell AIO 946 in Windows 8

  I have a Dell AIO 946 printer I am trying to install on Windows 8.  The driver is on my hard drive.  I don't know how or if I can continue from there.

  Hi Patsy,

  Do you use the 64-bit or 32-bit operating system?

  You can follow the suggestions mentioned below and check.

  Method 1: double-click on the Setup file and install the drivers.
  During installation it will ask you to connect to the printer, and then connect the printer, follow the instructions on the screen.

  Method 2: if the above fails, install the drivers in compatibility mode. Currently Windows 8 pilots are not available for your model.

  Dell all-in - One Printer 946, v.G9a A01
  

  http://www.Dell.com/support/drivers/us/en/04/driverdetails?DriverID=R145315

  Check out this link to install the drivers in compatibility mode:

  Make programs more compatible with this version of Windows.
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  
  

  You can also consult the following link:
  

  How to download and install drivers for Dell 946 all-in-one printer

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/kcsarticles/ArticleView?docid=266170

  Hope the above information is helpful.