Satellite P100: How to deactivate pine tick when the HID device fixation

Similar Questions

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How to validate an entry when the focus leaves the intensity absorbed in

  How to validate an entry when the focus leaves the intensity absorbed in a form?

  "Ansury" wrote in message
  News:garo90$L71$1@forums. Macromedia.com...
  > Not AFAIK. Event.Target has a reference to the object that sent the
  > event. In livedocs:
  >
  > "Every event object has a goal and a currentTarget property that help."
  > you
  > Hold where it is being spread. The target
  > property
  "> return to the sender of the event."
  >
  > BUT...
  > Your if statement will never evaluate true because you compare one
  > UITextField to a TextInput. A UITextField (stored internally in a
  (> TextInput, it makes the text) actually dispatches the event.

  currentTarget gives you the object on which the event actually listener
  attached to...

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• Satellite P100-286: Explorer no longer responds when leaving hybernation

  I have re-installed Vista from disk Toshiba supplied with the cleaning machine, gone through the process of updating, that is microsoft and Toshiba updates and drivers.

  I have searched data base Microsoft on the errors of Hybernation for Vista, most are to do with the USB, but without coming through what im getting.

  My problem is that if you come from hybernation explore stops responding and does not recover.
  I have tried to restart Explorer by the Task Manager but still don't get the desktop or allow me to stop in the correct Manor.

  Regarding loans Vista boot USB that I use, which stuck ok to use it in vista, activate or disable the always the same problem.

  Do you have ideas about how this can be fixed.

  Based Satellite P100-286, but with 4gig of RAM

  I presume, after reboot, you can use new IE. Am I right about that?

• Satellite P100: How remvoe the Touchpad shortcuts

  I have a Satellite p100, and I can't find the shortcuts around the touchpad very useful. I would like to remove them but may not know how to do it.

  Can anyone help?

  Hello

  I put t know if it of possible, but if yes then you should take a look in the properties of the touchpad.
  Go to control panel-> mouse-> device-> synaptic settings settings

  You will find different options such as Tapping, buttons, etc., virtual scrolling

• Satellite P100 - how to find the part number display

  Hello!

  I need to change the LCD screen for my Satellite P100, but above all I need to know the number of part of screen to check compatibility.
  How can I find it?

  Thank you.

  Hello

  New view of the laptop is not cheap. You need to spend a lot of money.
  If you need one that is compatible then get in contact with your ASP.
  The authorized service partner would be useful to order 1.

  You can also visit this page:
  http://www.screentekinc.com/toshiba__Satellite__P100-series-laptops-LCD-screens.shtml

  You will need a 17 WXGA LCD.

  Welcome them

• Satellite P100-286: cannot change "Customization" options in the Panel

  Toshiba Satellite P100-286

  Hello guys!

  Can someone help to solve my problem? For some time, I am not able to change/enter in ma, for example: screensaver of personalization in Control Panel. I can use only 2 of 7 available in "Customization" options/links Could someone help me, please?

  "Customization" isn't the only one of all the icons I can't come. There is a bit more such as: keyboard, Mail, regional and Language Options etc. Looks like the links to each of them does not work for me! :(

  I don't want to go through reinstalling Windows Vista so any help to solve this problem will be greatly appreciated!

  Thank you very much!

  Krzysztof (Chris)

  PS. one last thing, I tried to restore my system to the previous point, but I'm not able to do.

  Hello

  It is very strange to believe me, it's not easy to say why it happened and, therefore, we must study a little bit
  Did you install third-party applications on your laptop that could have a negative influence on the operating system?
  Have you changed the rights of account user or something like that?
  How about Antivirus applications? Always update you this software? Maybe it s a kind of virus

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management

• Satellite P100-434 - graphics card gone will be the motherboard replaced?

  Hello!

  Last night, on my laptop screen went black on reboot, but the rest of the laptop seems to load very well. First of all, I thought it was the light back who had died, but an external monitor did not work either, so my son thinks that the graphics card is dead.

  The laptop is almost three years, but, fortunately, it is still under an extended warranty. My question is, repair the laptop, no doubt, replace the motherboard or is not cost-effective and that they will give me a new laptop? Also, how time Toshiba take to repair laptops under warranty?

  Thank you for everything hep.

  Emily

  Hello

  Of course, if the graphics card is faulty, you will get a new mainboard, and due to the extended warranty, it will be free for you. You will not get a new laptop, only the motherboard will be exchanged I think because it s cheaper as a new laptop and Satellite P100 is pretty portable. ;)

  I think that no one can say how long the repair takes to your laptop. It's always different and depending on the availability of spare parts. Therefore, you should ask the authorized service provider. They can tell you more.

  But I have to say on my laptop, that the motherboard was also exchanged the ASP. Repair didn t take much time, as far as I know it was only a few days. Nice service and the technician are cool people. :)

• Satellite P100-238: stuttering graphics and sound with the game

  Hello

  A few days ago, I bought a P100-238 both for business and holiday makers with leisure activities include mainly games, I thought this would be a great opportunity to take the next level and buy something powerful with Vista on board... IM starting to think ive made a big mistake. First impressions of the laptop were great (and vista although it is a little welfare State is very good).

  The problems started when I installed a few games (Please take into account, it is a system of 4 GB with 2 gig of ram and a Geforce 7900 gs graphics card, it should theoretically be ideal). The first few games I tried was wonderful... If you stopped, but as soon as you moved (in the game) about every 3 seconds the games would stutter to stop, then start again... every 3 seconds. Okay, I need the drivers, so I jumped on nvidia and tried installing different drivers to see none to work with laptops. In fact whenever I tried to install I got the message that or the other driver is up-to-date or that I'm «not equipped for vista» Anyway to cut a long story short, I discovered www.laptopvideo2go.com when I discovered that Nvidia does not support drivers for laptops (even once cut a long and painful story short) so I used it recommended modded INF files as well as various pilots until the later. Unfortunately I still had the same problem, someone recommended it can become again the sound driver so I tried that no different.

  After further investigation on various forums, it seems im not the only person who knows these probems. On these boards, I noticed that someone had the sound and graphics too jerky and sent it for repair to have the CPU, motherboard, ram etc replaced until they found the error on the HARD drive and once replacement he was fine.

  Using this info and finally think I had put inside of it I took my laptop to the store and he was replacing, ultimately reinstalling everything and lift a game and running... guess what... still the same.
  This is totally unacceptable.
  How do you market a product as games and entertainment laptop when she's obviously serious faults preventing these activities.

  Anyone here have the solution? Also, I should mention that this problem persists when the resolution and graphic details fell to a minimum in the game.

  Thank you
  Darren

  [Edited by: admin]

  It's not a hardware problem or a laptop, but Windows Vista!
  Check out the other discussions in forum games on Vista performance with games!
  Some people have installed XP and it s running like in a dream!

  It seems that we have to wait for a first Microsoft Vista SP1 or certain patches.
  Maybe then the Vista will be more compatible with all these games on the market!

• Satellite P100: Black screen but I can hear the sound of Windows OS

  Hello

  I have a problem on my Satellite p100.
  I broke the screen or something!

  When I start the computer I press the Start button and the laptop start normal. But the fact is that the computer starts but not the screen.

  The screen is not from, but the computer does!
  The screen is black, but I've heard say that im in windows beacause of the sound beginning...
  I didn't break the screen,

  Can Some1 help me? Please, I beg you!

  Maybe you accidentally switched the display on an external monitor?  :|
  Have you tried to use the FN + F5 key combination to return the display on the laptop?

  In addition, I would recommend linking the external monitor to the laptop to check if something appears on a second external display.

  If this does not help with this strange problem I would recommend contacting the ASP in your country. Maybe, display works really bad and a very small part or whole LCD screen needs to be replaced

  Good luck