Satellite P100: How remvoe the Touchpad shortcuts

Similar Questions

• Satellite P100: How to deactivate pine tick when the HID device fixation

  Satellite P100 with Toshiba bluetooth stack, barcode reader Intermec SF51 bluetooth with emulation of keyboard HID profile, Scanner is recognized as a bluetooth keyboard, but when I try to pair these two together, a prompt window me to enter the pin code on my pops up "keyboard" for a very short time, and then without any intervention on my part, it closes, and the connection fails.

  I tried to disable all controls security for HID devices in the advanced settings and security level the lowest setting but nothing helps. How can I attach device just by a MAC address with no control PIN? Bluetooth stack version is 4.00.30. I know that this is not the latest version but after 5.10 installation wi - fi work and I had to back off.

  I don't know if it's possible for such devices disable pin code check as you can do with mobile phones.
  Because I think that it should be disabled on both sides, operating system and devices.

  But what exactly is your problem? Just enter a PIN or it is not possible due to the short time that the window?

• Satellite P100 - how to find the part number display

  Hello!

  I need to change the LCD screen for my Satellite P100, but above all I need to know the number of part of screen to check compatibility.
  How can I find it?

  Thank you.

  Hello

  New view of the laptop is not cheap. You need to spend a lot of money.
  If you need one that is compatible then get in contact with your ASP.
  The authorized service partner would be useful to order 1.

  You can also visit this page:
  http://www.screentekinc.com/toshiba__Satellite__P100-series-laptops-LCD-screens.shtml

  You will need a 17 WXGA LCD.

  Welcome them

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

  Hello

  I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

  I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

  Someone has ideas how to get this working again?

  Thanks in advance...

  Kind regards

  Matt

  Hi Matt

  Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

• Satellite P100-473 - suddenly the screen turns black

  Hello

  Since a few days, I have a problem with my Satellite P100-473 (with Vista Home installed recently + teamspeak only) after you have installed the latest version of Nero (maybe a detail)
  and do not know how, all of a sudden the screen went black.
  I so reboot and still black but the laptop properly started, the screen is activated (light up/down).
  I'm trying not to switch the display on an external monitor (VGA and DVI) no signal.
  I remove the battery for a few minutes.

  After a lot of irritation I gave it a week, I am again yesterday and after two tests display return with an error (such as a debug message), I forgot to note due to the excitement... ten minutes later same problem again:'(.)
  Yesterday before restarting the screen, I wait to start completely > type my password > sound > wait a minute > and type ESC / enter key at random.

  Can you please help me to find the source of this problem and maybe the solution to solve?

  Thank you very much for your future assistance, I hope you understand my pathetic English
  Best regards

  Hello

  Wait. You said you use external LCD and an external LCD related to this laptop.
  Do you use an external monitor Samsung, and maybe have you installed MagicTune software on your laptop?
  Please check this box.

  As far as I know software Samsung MagicTune can permanently disable the integrated computer Toshiba LCD display screen. Why?
  Because the MagicTune software is designed for use with desktop computers that do not have a built-in LCD screen.
  If your integrated LCD display has been disabled by the MagicTune software, you will need to make an arrangement for repair with a Toshiba authorized Service partner.

  But I hope that you have not installed this software.

• Re: Satellite L - how to disable touchpad tapping?

  How can I disable the "tap to click" function on the touchpad?

  I've done it before, but it has stopped working properly and I had to reinstall a few days ago, with the default settings. I am autour stumbling in the dark now try to disable the function ' tap to click on "boring.

  I put t know what Satellite phone and OS you have, but on my Satellite L300 I can disable tapping in this way:

  1) go to control panel > mouse > device settings
  (2) select the touchpad and click settings
  (3) on the new window, you must only click on listen and then remove the mark on activate Tapping.

  All that s! :)

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite R850 - scrolling on the touchpad stopped working

  For no reason at all. (as far as I can remember). I was just stuff randomly on pc (like every other time), surf the web, while I just recognized that my scrolling on the touchpad does not work. I tried to restart the pc, turn on/off touchpad, but doesn't have hepled.

  I have the Satellite R850 2R laptop with win7 on it.

  Try to check if Windows update has installed something today and roll back the OS to an earlier time (if possible to return in two days) using System Restore tool.

  I put t know if this will help but you can try it. Several times I saw this update of the synaptics driver is offered by the windows updates option.

• Satellite L500-164 - has the touchpad scrolling feature?

  Hello
  I am interested in buying the laptop L500-164.

  Can someone tell me if this phone has a touchpad with scroll function?
  And so, only the page down, or "from left to right?

  Thank you!

  Hello

  Yes, the Satellite L500 supports virtual scrolling.

  But that's why you need the driver for the touchpad, this feature is software based on other laptops. It is not a problem because the driver is already preinstalled and more you can download on the page of Toshiba. :)

  Fun with a new Satellite L500. A friend bought me too and it s really great and the price is also good.

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• Satellite P100 - cannot delete the data from CD - RW disks

  I have a laptop Toshiba Satellite P100.

  According to the user manual it says:
  You cannot delete partially all the data written to a CD - RW

  I thought the idea of using a CD - RW so you could delete everything that you wanted to and use this part of the disc again and again.

  Can someone explain?

  I didn t find this info in the user manual and if you burned a few data on the CD - RW disks, then it should be possible to format this CD - RW by using a tool like Nero Burning ROM third 3rd for example.

  I've done several times using Nero and still managed

• Looking for Satellite P100-PSPA3U of the driver for XP Pro SP3

  Hello

  I tried the driver for the Toshiba Satellite P100-PSPA3U. I am trying to get the driver on the European site, but I could the found.
  I'd really appreciate it if someone could help me with this problem.

  The laptop has the English version of Windows XP Pro SP3 32-bit.

  Kind regards
  Caesar Garnier

  Hi Cesar

  What is the country of purchase? It is P100-xxx?

• Satellite L750 - how to DISABLE touchpad zoom

  How can I deactivate my touch pad on my L750 zoom feature? I couldn't find anything in the user guide, but it drives me CRAZY. There are like 5 already zoom functions and toshiba decided what I really need, it's still right on the touch pad, where it will always get in the way that a.

  Anyway, any help would be appreciated.

  Hello

  I assume you mean on the pinch zoom.
  It an additional option of Synaptics. The touchpad settings should provide the ability to disable the pinch zoom.
  Go to control panel-> mouse control
  Here you must check the tabs in my case it s last tab called Advanced. Here, I have to go into the settings of advanced feature that contains more options.

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.