Satellite P200 - 14 H no sound using external speakers

Similar Questions

• No sound from external speakers

  I just started to use external speakers connected by USB. They work fine for playing music or streaming content from Netflix and also for content that I downloaded using VLC media player, but they do not work for content using Flash, like YouTube. The internal Laptop speakers work fine with Flash. Support the customer for the external speakers proposed to change the sound setting in Flash but I can't figure out how to do this. I see the settings for microphone and camera, but not for her. I am able to change this setting and if so, how?  I use 11,5,31,2 on a Sony Vaio laptop, running Windows 7.

  I finally discovered that this isn't a problem with Flash, but a google chrome question, I notice now I don't understand this browser info in my question.

• Satellite C655 - no sound on external speakers

  I just bought a Toshiba Satellite C655 and I can't not all the sounds from my speakers.

  I do, however, by small internal Laptop speakers. I looked at the configuration of the card its (Conexant CX20671) and cannot find a way to select a configuration of external speaker. I use the good line jack (not the headphone jack), so I'm really confused as to what is the problem. What is this audio driver compatible with my external speakers (Logitech Z-540)?

  Thank you for your help.

  Hello

  Just a simple question: have you tested other external speakers or headphones?

  I mean if the internal speaker is working properly, it's is not a problem of playing the sound because you can hear the sound.
  So in your case I test headphones and try to update the audio driver from Toshiba Web site.

• Satellite P200-1 b 6: Sound Driver update fails, and HD-DVD player does not work

  I just bought a laptop Satellite P200-1 b 6 and spent the day installing the updates recommended by the TEMPO programme. One of them was an update of RealTek audio driver but on run this it fails at about 80% of the way through with an error: "install Realtek HD Audio Driver failure!

  Now, the reader of HD DVD, Toshiba will fail with an error "unable to output the video to an external device.

  Please change your display keys of the device by pressing the Fn + F5 after the end of the application "." I tried this but it seems to have no effect.

  I'm now regretting starting to update the drivers installed. Should I try to rebuild the machine using the recovery discs or is there another solution that someone found? Or if others have found the upgrade work?

  All advice welcome

  Hello

  When I started using PC, one of my friends told me something: do not touch the well-executed system. I know that you, like so many other people out there, have updated things but as you can see, it can go in the wrong direction.

  This TEMPO software is good, but if all goes well the leave it as it is. What you can try is to use the System Restore tool and move the BONES to earlier time and hope everything will be OK again.

  Please post the result.

• Satellite A300D-158 - no sound on external speakers

  Hello

  I use A300D-158 with Vista 32 x internal speakers work ok but when I switch to external nothing changes (I can hear sound from speakers for laptop, but nothing about external speakers - as if I didn't all go). How can I handle this?
  Thanks in advance for the help.

  Hello

  Check please follows thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=177375& and read the last post here.
  This can help you?

• Satellite A300D - 14 d - no sound on internal speakers

  Hey, I'm sorry for my bad English.

  I just restored my Satellite A300D - 14 d to its default settings. If all the drivers and software are as I bought the laptop. The sound worked fine but after restarting the computer laptop 2 or 3 times because of the Windows Vista updates, the its all just disappeared. The internal speakers are pregnant harman/kardon.

  If I plug my headphones everything works fine, but I want to listen to the music via the internal speakers. If I unplug my headphones but there is no of his coming through the laptop speakers, I hear nothing.

  I tried his last card drivers form the home page of the support from toshiba for the A300D - 14 d, without a succsess.

  Need help pls!

  Hi Schurik,

  Have you verified that the windows audio settings? Usually in driver audio, you can switch between the audio output on speakres internal and external speakers (headphone).
  Check this box!

  What service pack for Vista is installed? More recent SP2 is installed?

• Sound from external speakers too low

  Original title: Windows 7 - sound too low external speakers

  I have a laptop Toshiba Satellite L70-1 DR with Logitech speakers.  There is no roulette volume on this laptop.  A few months back the volume of the speakers slightly reduced.  I just increased the main volume and that of each player (Itunes, Spotify etc) to sort.  Then a few weeks ago the noise decreased again.  First of all, I plugged in my speakers to my daughter's laptop computer and they worked very well.  Then I made sure that the levels of the speakers in speaker properties has been increased to 100 and I have also increased the equalizer in Windows Media Player.  This worked well even though I was a little concerned why it was happening.  However yesterday, its got even lower and then its listenable, if you sit next to the laptop its way too low compared to what you would expect reasonably.  The noise level when I plug my headphones is very well.

  I went through the troubleshooting procedure described in other posts, nothing helps.  I reinstalled the sound drivers - no change. I tried different improvements in switching in speaker properties - deactivation of all works of improvements, better but not good enough! And I've changed in exclusive mode on and outside, but no change.
  There can someone provide other tips?  Thanks a lot :)
  John
  Thanks for that - but I managed to solve this problem by removing the speakers, fiddling and putting them back together... Sorry if I wasted your time!

• Qosmio G10 - no sound with external speakers

  When I connect external speakers, no sound coming from them, on the built-in speakers. Could this be a hardware problem?
  Thanks for your help.

  Hello

  You didn't explain what happening exactly when you put the audio in Audio out port Jack. Now integrated speakers shouldn't be active any more. If they still work, I guess this little mixer of audio port which allows to switch between internal and external stakeholders can be damaged.

  If there is any attempt of trying to connect headphones or external speakers to make sure that no sound is at all.

  Good bye

• Internal speaker satellite L555-110 will not stop if external speakers are plug

  Hello

  Realtek Audio drivers L555-110 with Windows 7 32 Bit (via recovery).

  If I plug in external speakers, Realtek ask you if they are external speakers and then these exetrenal speakers, but ALSO the internal speakers of survey not very good.

  -> Y at - it a trick of configuration to switch the internal speakers and use only those external?

  Thnax 4 support!

  ZIALO

  Hello

  You can change the settings in Realtek audio Manager located in the control panel.
  There should be a tab named IO or something like that
  Right, you will find the headphone plug and microphone make a right click on the headphone plug and check if the internal speakers enable has been activated

  See you soon

• Satellite P200 - LCD is black but the external monitor is OK

  Hello

  I have a Toshiba P200 17.1 ", LCD has gone black,
  You can see the backlight in the background.
  It turns on sometimes.

  I checked with an ohmmeter lead LCD and it seems to be ok, is not sure that that is the problem.
  When I connect it to an external it follow the work ok, made his first appearance on the backlight.

  I suspect it is the LCD screen, but I would check with certainty before I part with my hard earned money.

  Question, I have a spare screen Latitude D600 14.1 ", with the same connector on the LCD (30pin)
  Could I use with inverter P200 to see if there is a signal / MoBo to the power connector.

  Thank you

  Spike

  Hello

  You must use the display 17.1.
  Your Latitude D600 screen is 14.1 "so it will not work.

• HD - DVD will not play on Satellite P200-123 unable to output to external device

  Hello

  Yesterday I bought a P200-123. One of the first things I tried after installation of Vista originally ran a HD-DVD. I know that the drive is fine as it works in my Xbox 360. Unfortunately, it has not worked with the software provided the HD-DVD player - the play icon will light up and then I get this error message:

  "Impossible for the release of the video on an external device. Please change your display keys of the device by pressing the Fn + F5 after the end of the application. »

  I don't have an external display connected to the laptop. I tried different discs but all gave me the same error. I then carried on the update of drivers and install a bunch of Windows updates. I tried several times the HD-DVD player in the countless updates and restarts but I still get the same error. Frustration, I bought PowerDVD Ultra. Who played the film for about a second before giving me an error:

  "Failed to initialize the display secure session - (error Code = 0122).

  The error dialog box goes on to say that the error can be caused by an incompatible graphics driver or even because I use a Setup dual monitor. The reference to two monitors is common to every player application so I wonder if the problem is in this area. I have not connected to a secondary screen but when I look at the standard windows display properties or the ATI Catalyst control center app dialog I see a disabled secondary monitor. I guess that's normal - there is no obvious way to remove the secondary display disabled.

  Can anyone help me to work the HD-DVD playback?

  Thank you

  Ian

  Have you tried updating the Toshiba HD DVD player?

  You can find the update in the Qosmio G40 section check it and try to run the update. Notes; Don t delete the old version of the laptop!

• Satellite P200-144 never stop correctly using Vista Ultimate

  Recently made a regeneration of my P200-144. Used with Vists Home recovery disk. Then upgraded to Vista Ultimate. After it was sold went to the web site of toshiba for the latest drivers and decided to update the bios.

  To restart the laptop is it never shutdown properly. Left with no other choice it off (left by logging out of the screen).

  Now computer laptop won't do anything. Is it possible to get the bios to boot / restore or do I need to reach a support centre.

  Hmm, looks a little more that the BIOS update failed?  :|
  Usually, in such situation the ASP help is necessary.

  But before contact you the ASP and will be sent to this device on the balance I would recommend removing the battery and disconnect the laptop power adapter.
  Then wait about 20 min, then reconnect both sides and try to start the laptop.

  If you won't be successful then the help of ASP is required

  Good luck

• Satellite P200 - 156 PSPBGE: can I use XP drivers of similar P series

  Hello

  Bought a new laptop P200 - 156 (PSPBGE) - which has Vista Home Premium installed.

  You can use as a development (developer) - need to install Oracle databases. So need to have enterprise (Vista). Expensive!

  Anyway,.

  -If I install XP Pro - (pilots - only for vista ONLY) - can question I use similar series xp P drivers?

  How much hassle involved?

  Any feedback is greatly appreciated.

  Hello

  In fact for the P200 XP drivers are not available at this time and it seems that we must wait for the compatible XP drivers!

  But maybe there is a light at the end of the tunnel
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24481

  It s on the use of P100 XP drivers on the laptop P200.
  Only XP drivers since the P100 must run on the P200 because this series are similar.

• Satellite P200: How install only Vista using Toshiba Recovery Disc

  Hello

  I would like to reinstall my operating system using the restore disk provided by Toshiba.

  I would like to know what changes I need to do to reinstall drive so that it installs Windows Vista only and does not install all the software it comes from, as well as pilots of two years.

  Hello

  It is not possible!
  The Toshiba Recovery disk contains an image. The image is a package that contains the Windows OS, drivers Toshiba, tools and utilities.
  Using the recovery disk, you will install the whole package.

  Welcome them

• How can I use external speakers with my MacBook Air?

  How can I use an external speaker with my MacBook Air? I have a Samsung wireless speaker.

  They are Blue Tooth? If Yes, then you need to pair by using the preferences of BT.