Satellite P200 - 17 c - freezes at loading Vista

Similar Questions

• Satellite A100 - 02 M fails to load Vista

  My Satellite A100 - 02 m fails to load Vista.
  Is there a repair partition on the hard drive?
  If yes how do for her?

  Jef

  I don't know what the problem is here, but if you're not able to load Vista using F8 and safe mode, then there must be a serious problem.
  I think the best solution for you is to install Vista using recovery media delivered.

• Satellite P200: Screensaver does not start on Vista Home Premium

  Hi people!

  I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

  ChrisB

  Hello

  Can I ask you if you use the Microsoft wireless mouse?
  I discovered that this may affect the functionality of the screensaver on Vista OS.

  Strange!

  Then maybe you should check out this MS article:

  + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
  http://support.Microsoft.com/kb/911895

  Feedback would be appreciated.

• Satellite P200 - update of the BIOS under Vista x 64

  Hello

  I downloaded the update of the BIOS on the toshiba site (1.70 WIN). I can't run on Vista x 64.

  Is it possible to update my BIOS?

  Thank you very much
  Simon.

  Hello!

  > I have trouble running as she complains the PHLASHNT.sys driver.
  Sorry, but I don't understand what you mean. It's not clear to me.

  I downloaded the package to update the BIOS for your Satellite P200 (PSPBGE). It contains the setup.exe file and the file ROM.
  Extract the two files to a folder and run the installer as administrator.

  Good bye

• Satellite P200: Keys Fn and message Bluetooth Vista

  I just installed the drivers updated for my Satellite P200, and now the Fn keys do not work for the brightness of the screen, etc.
  Also, I get a message when I boot not being able to turn on the Bluetooth module (because the switch located on the front is off).

  I have the Value pack installed (re-installed), but even now, keys Fn, can still tell me what I need drivers or something?

  And also how to get rid of the message Bluetooth (but still have the screen in the status bar!)

  Thank you

  Well, my Fn keys are back. I'm sure it wasn't to uninstall then reinstall the value pack, so I think it might have been reinstalling the flash utility cards.
  By the way, when they were not working, I noticed very oddly that F1 - F8 would not work, but F9 (disable the touchpad) would be!

  I got rid of the bluetooth message uninstalling Bluetooth Monitor 3. That means actually I don't know, because I always have the bluetooth icon in my tray, because it belongs to Bluetooth + Manager + - confusing!

• Satellite P200-140: cannot install software on Vista with the administrator account

  Hello

  just bought a new P200-140 Sat with windows vista at home, but I cannot load the software on the computer.

  I'm in administrator mode and when I am trying to load the software I get an error message saying "can only load software as an administrator of disconnection and reconnection as Administrator", but the problem is that I am the administrator.
  can anyone help

  Hello

  Are you sure that the admin account has been activated and you are connected with the admin rights 1005?

  I asked because the administrator in Vista OS account is disabled by default.
  Why? Well, it's an idea to Microsoft ;) and I think that the user must often work with limited rights.
  But if you want to enable this account you can do the following:

  -Right-click on the computer
  -manage
  -users and groups
  -double click on administrator
  -Remove the brand to deactivate account

  After this procedure you can connect to the Vista operating system as an administrator.

  I hope that these tips will help you.

  Good luck

• Satellite P200-140 sometimes freezes in XP

  Hello

  I put Windows XP with Service Pack 2 on my P200-140 after his purchase last week.
  For some reason it sometimes freezes, but recovers by itself after 10 minutes or more.

  It only happens two times a day at most and happens so that only programs runnig 1 or 2...

  I installed all the Windows updates, but also the latest BIOS update.

  I will probably reinstall XP, but the thought that someone might have a simpler solution.

  Any ideas?

  Simply repair?

  Well, you could solve the problem if you want to know what exactly is the problem!
  But I put t think anyone here will be able to tell what is causing these strange crash.

  First, it would be very interesting to know if the laptop works properly with the delivered original OS (vista).
  Try to install the OS restore CD.
  In this case the laptop runs with the factory settings.

  You test it without any installation of the 3rd party software and programs.
  If the system will work stable, then it is definitely not a hardware problem of problem but the software.

• Satellite P200-144 never stop correctly using Vista Ultimate

  Recently made a regeneration of my P200-144. Used with Vists Home recovery disk. Then upgraded to Vista Ultimate. After it was sold went to the web site of toshiba for the latest drivers and decided to update the bios.

  To restart the laptop is it never shutdown properly. Left with no other choice it off (left by logging out of the screen).

  Now computer laptop won't do anything. Is it possible to get the bios to boot / restore or do I need to reach a support centre.

  Hmm, looks a little more that the BIOS update failed?  :|
  Usually, in such situation the ASP help is necessary.

  But before contact you the ASP and will be sent to this device on the balance I would recommend removing the battery and disconnect the laptop power adapter.
  Then wait about 20 min, then reconnect both sides and try to start the laptop.

  If you won't be successful then the help of ASP is required

  Good luck

• Satellite P200 - 1FC dies reboot after installing Vista SP1

  As recommended I tried to install the service pack for Vista, but when he tried to restart I got "the installed program cannot start. Click OK to turn off the computer. »

  It will not restart in safemode, or any mode, actually.

  The drive only what i've got is the recovery disk that says that if I use it I lose all my data. Microsoft says 'Toshiba to ask. "

  So, here I am.

  Any ideas?

  If you want to ask Toshiba then you will need to call the support hotline
  This is a user forum and as much as I know there is no people of Toshiba

  So now you deliver what laptop do you have?
  How have you tried to install SP1?

  More details are needed...

• Satellite P200-144: after upgrade to Ultimate Vista FN keys do not work

  Hello

  I've upgraded to Vista Ultimate and now the Fn keys do not work. Multimedia keys are beautiful, and execution of the program of Flash cards, but no Fn key. What should I do to get back them?

  TIA
  Geoff

  Like the first, you need to tell us which model of laptop you have.

• Satellite P200 - Webcam no longer works after Vista upgrade

  Since the upgrade Vista Home Premium, Vista Ultimate, the built-in webcam did not work. I have re-installed the software camera which proceeds to driver software update point. Process to fail with the message "Windows has encountered an installation problem the software of the driver for your device. "Windows found driver software for your device, but has encountered an error trying to install it." Chicony USB 2.0 Camera ". «The driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  Download from Toshiba site does not contain the drivers for this device. only the Camera Assistant Software. Chicony Electronics site contains some drivers for cameras, but is not described cameras and refers to model numbers that are consistent with the references of Toshiba. I tried the latest model, but the driver installation completed with no termination message and the camera still does not work. Running the installation again recognized that something had been installed and proceeded to remove it, once again no completion message. A real class act!

  Can anyone suggest where I might find a solution?

  Hello

  > Download from Toshiba site does not contain the drivers for this device. only the Camera Wizard Software
  The pilot what s * and * software! This is a set that you need for the webcam!

  Before installing the latest version of the software, you must remove the old one first of all. Then, restart your laptop and use CCleaner to clean your registry and Windows. A reboot, and you can install the latest drivers from the Toshiba site.

  Check this box!

• Satellite P200 - 17 c freezes sometimes and the images have a red tint

  OK heres the problems...

  So year ago my computer crashed a lot, I am finally really bored with it so I erased the memory cool.
  Then after doing this, the problem has been resolved, but a new problem came.
  A red hue on everything I have not a clue of how else to to describe. The lines of each image for example a piece of grass has its image in red.
  It seems to just terrible and ruins all movies etc. which is annoying because im fond of youtube.com, I decided to open the laptop (which proved be a pig to open) and cannot find the problem, but when I closed the laptop and shake him a slight noise rattling at the top left of my laptop nearby speakers is here... (laptop = p200 - 17 c)

  2nd problem is that if I leave my laptop to go to a screen saver I will return to the laptop and it will randomly crash, crash not that I can't move my mouse but rather everything that says not responding do not and I turn it off because I can't do anything, has happened for about 2-3 months.
  3rd problem every time I charge the laptop, it is said that the camera is broken and it needs to be reinstalled... since it has never been installed, I don't know what's happening, it is built into the laptop!

  So, any help would be great

  Hello Adam

  In my opinion, you should contact the nearest authorized service (ASP) and speak with the technicians. First question graphic problem is for me the evidence that card doesn't work properly.

  What you can do now is to reinstall the OS with delivered Toshiba Recovery DVD.
  Test this with preinstalled OS clean and without any additional software on the subject.
  If the same thing happens again > ASP.

• Problem with the Broadcom BCM70010 on Satellite P200-123 video decoder

  I ran the Broadcom DiagTool.exe, getting several shortcomings, including the Version Compatibility Test.

  It's on a Satellite P200-123 part number: PSPB6E-02L028EN, Vista Home Premium 32-bit.

  Says Vista Driver version 2.14.4 Device Manager & "this device works correctly.

  Version 2.14.4 is the only Decoder driver Broadcom available on the Toshiba for Satellite PSPB6E-02L028EN site.

  I wonder what to try next.

  Thanks for any help.

  ================================================== =====================================
  Broadcom high definition video Decoder Utility.
  2009-12-11 11:12:50

  ----------------------------------------------
  Details of the software.
  Product version: 2.6.40.1
  Driver version: 2.14.0.4
  Library API Version: 2.17.0.0
  Firmware Version: 2.14.7.1 / 0.0.0.0

  ----------------------------------------------
  Details of the material.
  Name of the decoder: BOUZHAM 970010
  Room type: Mini PCIe Card
  Review ID: 0x31B000FB
  Serial number: n/a

  ----------------------------------------------
  Results of the tests.
  Version compatibility test: fail.
  Registered control Test: pass.
  Non Volatile Memory test: not support on bulldozer.
  DDR memory test: pass.
  FW download Test: pass.
  DMA entry Test: fail.
  DMA Test output: failure.
  DMA CRC Test output: failure.

  ================================================== =====================================

  Hello

  Laptop manufacturer is obliged to support the Broadcom DiagTool?
  What Broadcom support on this issue? Have you contacted their support?

  I mean they have to have the best experience with own products. It has probably been tested on different hardware platforms for mobile computing.

• Digital satellite P200 (PSPBGA) - footprints and the webcam will not work on Windows 7

  I use a Satellite P200 (PSPBGA) and have upgraded from Vista to Windows 7 Ultimate 32 bit.

  However the Toshiba Fingerprint Utility and Web Chicony Camera Assistant Software both do not work. I checked and there is no new update on the Australian site.

  Can you please help me with these two questions?

  Hey Buddy,

  I think that in this case, you can't do anything. I mean Windows 7 isn't on the market yet and at the moment there no drivers available. You can only try the Vista drivers because most of them are also work on Windows 7.

  Alternative I founded on the Toshiba page we some drivers beta Windows 7. Maybe they work:
  http://www.CSD.Toshiba.com

• Installation of devices under windows XP on Satellite P200 - 14H

  Hello

  I recently bought by Satellite P200 - 14H. It came with Vista home and because the CAD software that we use in our society does not work on it, we installed WXP on this. Everything works fine, we got the system almost entirely functional, 99% of drivers, but in Device Manager, I have yet 2 devices that are not installed:

  1 PCI memory controller
  2. video Controller (VGA Compatible)

  For the controller memory PCI I tried almost everything and I think that does not recognize software catalyst ATI mobility radeon 2600 HD because of this (I get an error "no compatible hardware found on your computer".
  Anyone know how to fix this? I need to send this laptop with a Builder on the ground next week, and it can't go like this...

  Thank you

  Hello

  If you need video drivers, try these sites:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  This can probably solve your problem of video controller...

  See you soon