Satellite P200: Keys Fn and message Bluetooth Vista

I just installed the drivers updated for my Satellite P200, and now the Fn keys do not work for the brightness of the screen, etc.
Also, I get a message when I boot not being able to turn on the Bluetooth module (because the switch located on the front is off).

I have the Value pack installed (re-installed), but even now, keys Fn, can still tell me what I need drivers or something?

And also how to get rid of the message Bluetooth (but still have the screen in the status bar!)

Thank you

Well, my Fn keys are back. I'm sure it wasn't to uninstall then reinstall the value pack, so I think it might have been reinstalling the flash utility cards.
By the way, when they were not working, I noticed very oddly that F1 - F8 would not work, but F9 (disable the touchpad) would be!

I got rid of the bluetooth message uninstalling Bluetooth Monitor 3. That means actually I don't know, because I always have the bluetooth icon in my tray, because it belongs to Bluetooth + Manager + - confusing!

Tags: Toshiba

Similar Questions

  • Satellite P200 - 17 c - freezes at loading Vista

    Hi all, I have the following system:

    Satellite P200 - 17 c
    Intel® Centrino® Core 2 Duo Processor T5450
    Genuine Windows® Vista® Ultimate Edition
    DVD Super Multi (Double Layer) drive
    2 048 (1 024 + 1 024) MB
    17.1 "Toshiba TruBrite® WXGA + TFT display

    The issues I'm having is that when I start the laptop, it freezes at the loading bit Windows Vista. I so can't further.

    I did some research on the internet and he advised removing the DVD drive, and then start the laptop. I did and he'll actually past Windows loading, but then the screen turns white for a while, eventually he'll in CHKDSK - here it always freezes at 31%. I was able to access the Advanced Boot Options, but it freezes trying to get into Safe Mode. I don't have a disc of recovery at hand, however, I have a Vista OS disk, I can also access the BIOS.

    Please indicate how should I proceed? Thank you

    Hi masave,.

    If your laptop also freezes if you enter mode Windows safe, it seems that the OS is confused upward and you probably have to reinstall

    In your case, I'd do a recovery facility. You can use the function of your laptop HARD drive recovery. Go to the advanced Windows (F8) boot menu and select Repair my computer. The installation of recovery will begin now.

  • Digital satellite P200 (PSPBGA) - footprints and the webcam will not work on Windows 7

    I use a Satellite P200 (PSPBGA) and have upgraded from Vista to Windows 7 Ultimate 32 bit.

    However the Toshiba Fingerprint Utility and Web Chicony Camera Assistant Software both do not work. I checked and there is no new update on the Australian site.

    Can you please help me with these two questions?

    Hey Buddy,

    I think that in this case, you can't do anything. I mean Windows 7 isn't on the market yet and at the moment there no drivers available. You can only try the Vista drivers because most of them are also work on Windows 7.

    Alternative I founded on the Toshiba page we some drivers beta Windows 7. Maybe they work:
    http://www.CSD.Toshiba.com

  • Satellite P200 - update of the BIOS under Vista x 64

    Hello

    I downloaded the update of the BIOS on the toshiba site (1.70 WIN). I can't run on Vista x 64.

    Is it possible to update my BIOS?

    Thank you very much
    Simon.

    Hello!

    > I have trouble running as she complains the PHLASHNT.sys driver.
    Sorry, but I don't understand what you mean. It's not clear to me.

    I downloaded the package to update the BIOS for your Satellite P200 (PSPBGE). It contains the setup.exe file and the file ROM.
    Extract the two files to a folder and run the installer as administrator.

    Good bye

  • Satellite P200: Screensaver does not start on Vista Home Premium

    Hi people!

    I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

    ChrisB

    Hello

    Can I ask you if you use the Microsoft wireless mouse?
    I discovered that this may affect the functionality of the screensaver on Vista OS.

    Strange!

    Then maybe you should check out this MS article:

    + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
    http://support.Microsoft.com/kb/911895

    Feedback would be appreciated.

  • How to install Vista using product from the bottom of the Satellite P200 key?

    Hi all

    I recently had to replace my HARD drive as my P200 took a fatal error, corrupt all the data on the old HARD drive. I have no recovery at all disks, (none were provided), and I was wondering how am I supposed to do to reinstall Vista using my product from the bottom of the laptop key? Can anyone give any help please?
    As I read other related topics, I feel I need to approach Toshiba and buy a restore CD, at my expense. Is this correct?

    Thank you

    Lee

    Hello

    If you didn't burn the recovery disc after the purchase of your computer, you will need to order it for the money. , Talking Vista using my product key from the bottom of the laptop, this is not any type of key on recver Vista, this is a serial number of your computer. You can also install the original copy of Windows with the drivers of Toshiba page.

    Welcome them

  • Satellite P200-144: after upgrade to Ultimate Vista FN keys do not work

    Hello

    I've upgraded to Vista Ultimate and now the Fn keys do not work. Multimedia keys are beautiful, and execution of the program of Flash cards, but no Fn key. What should I do to get back them?

    TIA
    Geoff

    Like the first, you need to tell us which model of laptop you have.

  • Cannot retrieve the Satellite P200-123 - IMAGEX error message

    Hello

    I HAVE A LAPTOP TOSHIBA P200-123 AND I AM DOING A RECOVERY, BUT FOR SOME REASON, IT IS ABOUT 19 TO 26% AND THEN RETURNS WITH AN ERROR SAYING THAT IT COULD
    IS NOT APPLICABLE TO IMAGEX AND I'M AT A LOSE WHAT TO DO.

    IS THERE ANYONE WHO CAN HELP ME WITH THIS PROBLEM.

    Hello Erin

    It is not easy to say why this happens because this error message occurs for different issues.
    One thing can be the reason for this.

    If I well remember when you start the recovery option it must be key SETUP (next step after the confirmation of the language). Maybe you're trying to use installation option OS on the existing partition).
    I tested it a long time ago, and I can confirm that this will not work. What is happening is very strange.
    What is happening, it's a procedure facility trying to install the OS on partition WinRE (Vista). This partition is 1.5 GB only and after 20 or 30% facilities simply stops.
    Maybe you try to do this. I do not know.

    Try using the installation of recovery with the default settings. Don't change anything in the configuration option.
    Test if you please and let me know exactly what is happening.

  • Satellite L350 - key FN and F9 touchpad does not work

    Hello

    I have a toshiba Satellite L350 with Vista 32 bit and my problem does NOT work FN keys.
    I installed already Synoptics Touch Pad V6.3 from Toshiba Web site, but it did not help.

    I searched for other software mentioned on this forum, but I could not find.

    The biggest problem is that my touchpad is locked, and fact without work FN + F9

    Use me keyboard just - what is difficult and annoying :(
    I'd be really greatefull if anyone can help me :(

    Hugs,
    Kate

    I agree with Akuma
    You need the PPV for the FN keys work.

    PS; If you want to use the Toshiba OS preinstalled, so everything should work properly!

  • Satellite P200-140: cannot install software on Vista with the administrator account

    Hello

    just bought a new P200-140 Sat with windows vista at home, but I cannot load the software on the computer.

    I'm in administrator mode and when I am trying to load the software I get an error message saying "can only load software as an administrator of disconnection and reconnection as Administrator", but the problem is that I am the administrator.
    can anyone help

    Hello

    Are you sure that the admin account has been activated and you are connected with the admin rights 1005?

    I asked because the administrator in Vista OS account is disabled by default.
    Why? Well, it's an idea to Microsoft ;) and I think that the user must often work with limited rights.
    But if you want to enable this account you can do the following:

    -Right-click on the computer
    -manage
    -users and groups
    -double click on administrator
    -Remove the brand to deactivate account

    After this procedure you can connect to the Vista operating system as an administrator.

    I hope that these tips will help you.

    Good luck

  • Satellite P200-144 never stop correctly using Vista Ultimate

    Recently made a regeneration of my P200-144. Used with Vists Home recovery disk. Then upgraded to Vista Ultimate. After it was sold went to the web site of toshiba for the latest drivers and decided to update the bios.

    To restart the laptop is it never shutdown properly. Left with no other choice it off (left by logging out of the screen).

    Now computer laptop won't do anything. Is it possible to get the bios to boot / restore or do I need to reach a support centre.

    Hmm, looks a little more that the BIOS update failed?  :|
    Usually, in such situation the ASP help is necessary.

    But before contact you the ASP and will be sent to this device on the balance I would recommend removing the battery and disconnect the laptop power adapter.
    Then wait about 20 min, then reconnect both sides and try to start the laptop.

    If you won't be successful then the help of ASP is required

    Good luck

  • Satellite P200 - Webcam no longer works after Vista upgrade

    Since the upgrade Vista Home Premium, Vista Ultimate, the built-in webcam did not work. I have re-installed the software camera which proceeds to driver software update point. Process to fail with the message "Windows has encountered an installation problem the software of the driver for your device. "Windows found driver software for your device, but has encountered an error trying to install it." Chicony USB 2.0 Camera ". «The driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

    Download from Toshiba site does not contain the drivers for this device. only the Camera Assistant Software. Chicony Electronics site contains some drivers for cameras, but is not described cameras and refers to model numbers that are consistent with the references of Toshiba. I tried the latest model, but the driver installation completed with no termination message and the camera still does not work. Running the installation again recognized that something had been installed and proceeded to remove it, once again no completion message. A real class act!

    Can anyone suggest where I might find a solution?

    Hello

    > Download from Toshiba site does not contain the drivers for this device. only the Camera Wizard Software
    The pilot what s * and * software! This is a set that you need for the webcam!

    Before installing the latest version of the software, you must remove the old one first of all. Then, restart your laptop and use CCleaner to clean your registry and Windows. A reboot, and you can install the latest drivers from the Toshiba site.

    Check this box!

  • the windows need key product and for my vista I write - and tell me its use - always ask to activate windows why

    I have windows vista with my computer

    He asks me to activate windows vista
    I write my product key
    It tell me that this product key is already used
    Why

    I have windows vista with my computer

    He asks me to activate windows vista
    I write my product key
    It tell me that this product key is already used
    Why

    Activate by phone:

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    Pay attention to step 2: how to do a phone Activation.
    Note: If the activation service informs you that she has failed and cannot help with activation, thenSTAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista.

    ..............................................................................

    Here is a response from Keith, Microsoft Support,
    Moderator, on this subject.
    Date: April 29. 2010
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-is-showing-as-not-genuine/6efea9fd-70a9-4530-88c8-93fd7b2d5484

    ................................................................................

    . How to activate Windows Vista
    http://support.Microsoft.com/kb/940315

  • Satellite C660 - key FN and wireless network detection no longer works

    Hi people,

    As a result of a virus, I put my computer to its factory settings.

    I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer.

    Also, my computer can not detect wireless networks more. I did all the required updates and checked the State of the wireless card, but still nothing.

    Any ideas?

    See you soon!

    Hello

    May I ask what system you have installed on this laptop?
    Is - this Windows 7?

    If you are using Windows 7, you need to install Toshiba Value added Package and Support Toshiba Flash Cards for utility work affects FN.

    I m nit course on the WLan driver because different C660-xxx supports various wireless network cards. Perhaps you could provide the name of the complete model of the C660-xxx
    This would facilitate the search for the Wlan driver.

  • Satellite P200 - 1FC dies reboot after installing Vista SP1

    As recommended I tried to install the service pack for Vista, but when he tried to restart I got "the installed program cannot start. Click OK to turn off the computer. »

    It will not restart in safemode, or any mode, actually.

    The drive only what i've got is the recovery disk that says that if I use it I lose all my data. Microsoft says 'Toshiba to ask. "

    So, here I am.

    Any ideas?

    If you want to ask Toshiba then you will need to call the support hotline
    This is a user forum and as much as I know there is no people of Toshiba

    So now you deliver what laptop do you have?
    How have you tried to install SP1?

    More details are needed...

Maybe you are looking for

  • Enter new credit card information

    Old card expired iPhone 6 won't let me enter the new credit card info to buy apps.

  • My Apple ID hacked after 12 hours

    2 days ago, I bought iPhone5. Last night I did nine iCloud email (account) and off course all find my iPhone on YOU. Everything worked very well, but this morning I tried to connect to Game Center and password was rejected. Then I went to the Apple s

  • Mail indicator - Hello blackBerry smartphones?

    Hi guys,. I got my Bold 9700 for a few days now - overall very happy. I'm a switcher iPhone and I am myself that I did not have the months of the switch there are kicking! However - a quick question! The notification next to the envelope icon does no

  • Model works on other pages except the blog

    HelloI have several templates that I use with my BC site. But when you want the blog itself, the model does not in effect and this appears:"Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If t

  • ORA-12162: TNS service name: net is incorrectly specified

    Dear allHelloI am facing problem when starting linux 4 64-bit version of oracle 11 g Recovery ManagerDatabase works fine and when I try to start giving rmanI put all the good setting and able to start the database data, but problem when you try to st