Satellite P200 - 17 c - I want that back factory settings

Similar Questions

• Satellite P200-where is the switch that makes display to turn off?

  Hello world

  I have a Toshiba Satellite P200, there is a problem with the display, it works and it doesn't work.

  I did some checking, the backlight is turned on, and it works well with a second monitor.

  The question I really want to ask, where is the switch or contact on the lid or the body of the laptop that stops at the screen when I close the lid?

  I have the laptop stripped down and I see there, not anywhere, where there is some sort of mechanical or magnetic contact between the cover and Palm rest.

  I thought he got me something where the lid locks close but can't see anything there.

  I know that there must be something that puts the laptop into hibernation when I close the lid, but the sensor or another location.

  see you soon

  Spike

  I think that the sensor is part of the motherboard, but can't tell exactly where he might be.
  But as far as I know that the JP9 (40pin) is used to connect the screen.

  However, in my opinion this is not a sensor delivers
  If something is wrong with the screen, you may need to replace either, FL inverter, LCD screen or check the connection between the screen and motherboard

• Satellite A200-195 - you try to reset to factory settings

  Hello

  After you have backed up all my data, I'm trying to reset my Toshiba Satellite A200-195 back to factory settings, to try to get some of the performance. Internet search has launched a number of ways to do this, but none do not work for me.

  I tried now button 0/F1/F8 when switching on the PC until I get the beeps. But then, the only options I get are safe mode, safe mode with networking or start Windows normally.

  I pressed the F8 key the time Toshiba screen upwards and got through a number of options, including the repair of the system. However, after selecting that, when the dialog box appears, these are all the options I get

  1 Startup Repair tool
  2 system restore
  3 Windows complete PC Restore
  4 Windows Memory Diagnostic tool
  Command prompt 5
  6 restore the full Windows operating system.

  There is nothing obviously suggests a Toshiba Assistant or mentions the factory settings. I tried the last option, which brings up a dialog box telling me that if the pre-installed files are corrput I can use the recovery disks and just the OK option. After clicking on OK nothing happens. I tried several times, but each time waived forward and pressed the stop down or restart buttons.

  I also tried the first 3 options, but none of them gave me an option to reset the default or the other.

  I have no recovery disks and I saw searched the help files for the system backup, can't find anyway to create them - only standard data file backups.

  I don't have any disks that came with the laptop.

  I am running Windows Vista Home Premium.

  Can anyone suggest anything, that I have not tried yet please? PLEASE?

  Thank you. :)

  Obviously the HDD recovery partition isn t available on the HARD disk and, therefore, you will not be able to perform HARD drive recovery procedure.

  To retrieve the computer laptop back to factory settings, recovery disk should be used.
  If you n t own this disc, try to order the support on this page:
  http://backupmedia.Toshiba.EU/landing.aspx

  But in case the laptop is too old, you will not be able to order this support more.

• Satellite C850D - error 10-FC12_045D during recovery to factory settings

  Hello

  I own a C850D satellite with Win7 64-bit, and for several days, the system became extremely slow and inadmissible. I first thought of a virus so I started it in integrated security mode and running antivirus (MS security essentials), another analysis has been made to a live CD antivirus Kapersky but no virus was detected.

  I took the decision to restore the whole system parameters according to the instructions of the user manual, and the restore process will fail with an error 10-FC12-045D.

  I suspect that the cause is a faulty hard drive. 2 quesntions:

  1. can anyone confirm this diagnosis? Should I seek other ways to diagnose a hardware problem on this laptop?
  2 - if it is confirmed that the HARD drive is broken, as I suspect, what is the process to get a new one and reinstall the OS Win7 to factory settings? I don't have any recovery media.

  Thanks in advance for your help.

  Yves.

  Hello

  If your laptop still has factory settings follow the user s manuals recommendation and create recovery discs. Test you like these discs and try to install the recovery image. If the same problem occurs again and again I m afraid HDD can be the troublemaker.

  I put t know if the warranty is still valid, but I recommend you to contact the nearest Toshiba authorized service provider and ask for help. Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Please send comments.

• How can I restore back factory settings (computer acer laptop) do not have a disk windows vista

  Please help I need to restore my computer laptop back to settings factory, I don't have a disc or instructions to help me have tried hitting F8 at startup upwards and does not give me the way that I need.  Please help it will be much appreciated t

  It is an acer aspire 5920

  Hello paulharrisonXE,

  Press the combination of keys Alt + F10 at startup to start Recovery with your Acer factory settings.

  If asked for a password for it, if you have not changed the try Acer recovery password 6 zeros (this is the default password for Acer).

  Then follow the prompts.

• Cannot restore my net book of packard bell back factory settings

  Please can someone help me I have restored my net book of packard bell back to factory settings that it kept freezing now the screen is stuck and just said the Installer starts services but nothing is past help

  Discussions were merged.

  Double not deleted to "inflate" list

  If this does not work, I suggest you contact Packard Bell for assistance this is a Netbook with no DVD player.

  Download the ISO file.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  Use the product key on the machine:

  

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

  See you soon.

• Back factory settings - Pavilion a642n - Windows 7 - 32 bit

  Initially, I had Windows Vista Home Premium, I did an upgrade to Windows 7.  I had problems with a corrupted user account files, I couldn't see my devices and printers, can not use Windows Move Maker, cannot use some of the troubleshooting wizards.

  I tried the following:

  How to fix a corrupted files users account.

  Recovery of a backup copy.

  Now want to want to use the collection to its original factory settings, as I do not have the recovery disks, there is another way to do it,

  Read "Scenario 4" here: "".

  http://www.MaximumPC.com/article/HOWTOs/how_use_your_windows_7_upgrade_disk_fresh_pc

• Satellite P200 - 17 c - I want to install Windows 7 64 bit

  Hello

  I use Toshiba P200 - 17 c (PSPB6E) and were broadcast on the public beta of Windows 7 32 bit because it had been released a few months earlier, but I am surely informed Windows 7 64 bit is the way to go, so I would like to give it a try when the RC was released on 5 May. I have some questions I want to answer it please:

  1. the "spec" for my laptop indicates that it supports the Intel 64-bit architecture, but that the BIOS must also support 64-bit. Can someone tell me if my P200 will support and run Windows 7 RC 64 bit?

  2. my current BIOS version is v2.50 for 32-bit and the download page was also a v2.50 for 64 bit, does that mean if I want to use Windows 7 RC 64 bit, I need to Flash my BIOS using thev2.50 BIOS 64-bit?

  3. If the answer to Q2 is Yes and I flashed my BIOS using the d/l 64-bit, do I need to re - flash BIOS 32 bit if I want to go back to using any 32 bit OS?

  4. If the answer to Q3 is Yes, then I would have thought that Toshiba would have created a BIOS that would support 32-bit and 64-bit at the same time.

  Regrads

  Dave

  > As mentioned above, I am using Windows 7 32 bit and if I had to install Windows 7 RC 64 bit, would I need to update my BIOS with BIOS of 64-bit while I use a 32 bit OS and then install the 64 bit OS, or I install the OS 64-bit with my current 32-bit BIOS and then update once the 64 bit OS is installed?
  > (My personal feelings are that I had to upgrade from 32-bit to 64-bit BIOS while I use Windows 7 32 bits and then immediately to install Windows 7 64 bit)?

  If you want to update the BIOS, then you must first switch to the OS preinstalled Toshiba!
  I doubt that the BIOS update has been tested with Windows 7 at the moment and in my opinion, there is a high risk that something went wrong during the BIOS update process!

• simple thing, I want that back photoshop, illustrator, indesign, lightroom, muse not much to ask, but it seems to be some problems with the adobe Manager and cs6 forget cs6, I just want to back cc 2015, I've been stuffing autour with this all day

  Ouch even tracks of communities a mistake

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• My Satellite L500 finish restoration of ti back factory settings

  Well, then I restored my computer laptop back to factory without a disc because settings that I didn't and don't have I not of the recovery disks. It gets to the point where its says the facilities of finishes and just never ends.
  Could someone help me please.

  I can not do again because when I fress F8, the repair option does! PS I'm not very technical, so please try to speak simply.
  Thank you

  > I'm not very technical so please try to speak simply.
  At this point, you will not be able to use the recovery saved on your HARD disk image. in other words - you need recovery DVD for installing the OS.

  Recovery disk Toshiba original that can be ordered on https://backupmedia.toshiba.eu/landing.aspx

  Sorry, but I see no alternative for you.

• I want to restore factory settings Inspiron E1405.

  "It's the directions I found however when I say at F8 the.

  "Repair your computer" option is not available

  I have restore but he wants to take me to restore point (which was not far enough into history and now I have cleared this point also to the date of today ' hui)

  I have the disk that have operating systems, but may not have to restore

  Also, I did not the "image to the Dell factory setting source.

  Thank you for your help

  Dell Solution Network: Knowledge Base Article Restore your original Installation Dell computer factory with Dell DataSafe Local Backup 2.0 The journal ID: 10263S91YL Item number: 353562 Date of publication: 01/10/2009 Last updated: 25/05/2010 "Restore your original Installation Dell computer factory with Dell DataSafe Local Backup 2.0 To restore your computer to the original factory installation, follow these steps: 1 turn on the computer and press the key when the Dell Logo appears. 2 in the Advanced Startup Options highlightRepair your computer with the arrow keys and press . 3. click on

  Next >

  and connect you to your administrator account on the computer. The administrator account is the account is created the first time that the computer is turned on.

  4 options click Dell Factory Image Recovery and DataSafe and follow the instructions provided.

  
  Top of page

  "More information

  See the following links for more information about Dell DataSafe Local Backup 2.0.

  What is Dell DataSafe Local Backup 2.0? Article ID: 353560

  Creation of your discs with Dell DataSafe Local Backup 2.0 recovery system Article ID: 353561

  Restore your original Installation Dell computer factory with Dell DataSafe Local Backup 2.0 Article ID: 353562

  Create a backup using Dell DataSafe Local Backup 2.0 Article ID: 353563

  Restoring a backup using DataSafe Local Backup 2.0 Article ID: 353564

  Update for Dell DataSafe Local Backup 2.0 Professional Article ID: 353565

  Frequently asked Questions: Dell DataSafe Local Backup 2.0 Article ID: 353566

  
  Top of page

  You will need to contact Dell for further instructions.

• BACK FACTORY SETTINGS

  I HAVE A HP DV6000US LAP TOP AND IT CAME WITH XP, WITH THE DISCS TO A FREE UPLAOD OF VISTA, WHICH I LOVE, BUT MY COMPUTER HAS BEEN RUNNING SLOWER AND I WANT BACK TO THE ORIGINAL FACTORY.

  CAN ANYONE HELP WITH THIS? I DID a RESTORE DISK, BUT SINCE I HAVE VISTA ON HERE, I'M NOT SURE IF this IS FOR XP.

  THANK YOU AND GOOD AND HAPPY NEW YEAR

  I HAVE A HP DV6000US LAP TOP AND IT CAME WITH XP, WITH THE DISCS TO A FREE UPLAOD OF VISTA, WHICH I LOVE, BUT MY COMPUTER HAS BEEN RUNNING SLOWER AND I WANT BACK TO THE ORIGINAL FACTORY.

  CAN ANYONE HELP WITH THIS? I DID a RESTORE DISK, BUT SINCE I HAVE VISTA ON HERE, I'M NOT SURE IF this IS FOR XP.

  THANK YOU AND GOOD AND HAPPY NEW YEAR

  Hey renaileann

  Contact hp and ask them to send you a set of xp recovery disc

  they will do it for a nominal cost

  Reinstall xp and then upgrade to vista

  http://welcome.HP.com/country/us/en/contact_us.html

  have a Happy New Year

  Walter, the time zone traveller

• I have Satellite L40-139 and need to restore the factory settings

  The problem is, that the recovery of the program disk does not open automatically and even hold down F8 at the beginning upward does not work as I get another page to the screen showing the details of American Megatrends and no option to return to factory setings.

  Any ideas how I can get around this? This page has only been for about a week.

  Thank you

  I don't know what you're doing exactly, because it automatically start confuses me, and I do not understand you exactly.

  Before discussing the installation of recovery, I would like to know what you are doing exactly.
  You try to start the installation of the OS on the procedure of recovery DVD or disk HARD recovery using F8 and disturbances of my computer?

• IMac G5 to go back factory settings

  How can I remove all documents and set up my old G5 iMac to factory settings?

  Click here and follow the instructions. When you reach step 5, insert the original disc, restart with the C key or Option key, use disk utility to erase the internal drive and install a fresh OS.

  (141335)

• Satellite P200 - disabling Internet special button Close button walk / stop

  I have a Satellite P200. Recently, the problem that my Internet push button itself so multiple Firefox Windows begin to appear at random intervals. Sometimes 2, sometimes it's 30. Needless to say, it's pretty boring.

  I found where I can customize the buttons and make the Internet button open a different program, but it doesn't seem to be an option to turn it off completely. If I "Unregister" the Internet button, then it goes back to the default function of opening a Web browser when it is pushed.

  Is it possible to completely disable these keys?

  Thank you!
  Jason

  Hello

  I have the same model of laptop and disabling option is not known to me. What you can try is to remove the utility of technical support of added value package button.

  In Control Panel, you will find option programs and features. Click to remove the VAP. Generally, it should ask you to change the installation and you can choose which part of this package can be deleted, if it is not completely remove the VAP.

  Download the last option in the download page of Toshiba, but when the facility starts choose custom installation and uncheck the box in front of the technical support of button utility.

  So for now I see it as the only possible solution.