Satellite P200-1EE connected to LCD TV via HDMI

Similar Questions

• Satellite P200-1EE - connect to the router N project

  I just changed the router, I am using a rating of g to the n side. However the new router is only detected at 54 Mbps.

  Are there settings I can change within the computer to get the fastest transfer rate? We have another laptop that automatically goes to the faster connection.

  Hi Witchypoo,

  Project to support Satellite P200-1EE doesn t N, so it does not faster than 54Mbps connect. The laptop supports only 802. 11a / g

• L750 satellite will not connect to the TV via HDMI and stops

  Hello

  When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

  I tried all the HDMI ports on the TV and the different HDMI cords without change.
  Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

  Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

  Is it possible to change/upgrade, that?

  All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

  Thanks :)

  You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
  The HDMI isn't limited to a certain TV interface.

  The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

  In your case, there is an open question about preinstalled system.
  Do you use the operating system preinstalled by Toshiba or did you change it in the past?

  If you have changed the system, the problem could be linked to the preinstalled graphics driver.

  However, my recommendation is simple:
  First of all I recommend you to reinstall the graphics driver.
  First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

  Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
  In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
  Now connect the laptop to the TV using an HDMI cable.
  Turn on the TV and then laptop.
  Shortly after, use the function FN + F5 keys to switch to the external video output.

  Good luck!

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.

• Satellite P200-1EE PSPB6E: problem of battery and Webcam

  Hiya People,

  New on the Toshiba Forums here and stuck on a problem I have with this laptop.
  I have a Satellite P200-1EE model number: PSPB6E 0GM028EN. The election House of Uni a few days ago my refuses to laptop to turn on the laptop on and happening only when I put a Power cable in.

  I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened.
  Strange thing is that, once it is running, and I take the power wire, it works fine.

  2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again.
  I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop.
  Am I right in thinking that its due to the new version?

  Any help or Suggestions are appreciated and thanks in advance

  Seamus

  > Laptop on and lights up only when I put a power cable. I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened. Strange thing is that, once it is running, and I take the power wire, it works fine.

  It is maybe something wrong with the battery of laptops of s?
  How old is your laptop? Guarantee is valid?

  As far as I know, the guarantee covers the battery for one year. Then maybe you should ask and ASP in your country for a control? Maybe the battery doesn't work as it should.

  > 2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again. I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop. Am I right in thinking that its due to the new version?

  I n t have a solution to deliver you but I assume that it s associated with the software/driver of webcam.
  You should visit the European driver Toshiba page from time to time and need to check if an update is available.

  Good luck

• Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

  Hello

  I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

  I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I tried the update audio drivers but it tells me that I have already installed the drivers the best.

  Any help would be most appreciated.

  Thank you for your time.

  Hello

  What OS do you have?
  What is Vista?

  If yes then another question; have you installed SP1?

  Please also see the European driver of Toshiba page and choose your model of laptop.
  There is a DVD HD v4.32.00 patch reader.
  The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

  See you soon

• Satellite P200-1EE - hard drive not found if I try to install XP

  Hi I have a problem.

  I recently bought a Toshiba Satellite P200-1EE laptop computer series (of all things) running Vista and nothing else problems so im trying to install XP Professional and crush Vista.

  But whenever I try to install it says "disc not found... no access to.
  I heard about such problems before something as a "block of software Protocol.

  Any suggestions?

  Hello!

  Why you n t search forum before starting a new topic?
  I mean you will find hundreds of discussions on this question here in the forum and you will find the solution to your problem in a few minutes.

  Well, the reason for this is because you need the SATA drivers before installing Windows XP. As far as I know that your laptop is equipped with an Intel chipset and so you have the Intel Storage Manager. You can integrate the drivers of external floppy drive or nLite [www.nliteos.com]. In addition, this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have any other questions, please use the forum search!

  Good bye

• Satellite P200 - 1EE HD DVDs - cannot play beyond the language selection

  Hi all

  I recently bought a new Toshiba Satellite P200-1EE.
  However its HD-DVD player would not play a movie HD DVD (Transformers) at all!

  When I insert the disk it shows the first screen - language selection Menu
  When I choose English or anything else out there it just crashes and beyond would play.

  I had the same problem with another disc too.

  All the world has experienced the same problem and managed to resolve it?

  I went through some of the other solutions given here inculding update to the latest drivers etc, but nothing seems not to help.

  Thank you very much - Arvind

  Hello

  You should visit the page of the Toshiba driver and need to update the firmware of CD/DVD players and HD Toshiba DVD player software.

  This aid comes of course!

• Satellite P200-1EE: HD DVD 'Harry Potter' hangs

  Hi all

  I just got a new computer "Satellite P200-1EE" eager and got a HD DVD "Harry Potter OOTP" and it hangs just... is sujests I need a firmware update?

  I tried to search for a file called firmware update, can anyone point me in the right direction...

  OK I bet its simple dead - but I'm everywhere LOL
  Thanks for your help; (o)

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=103921&

  Please don t forget a fact; HD DVD technology is very recent, and not all movies have been designed with the same level.
  Probably, this could be a reason why the movie Harry Potter HD DVD does not work!

  You might try another HD DVD to make sure that the HD DVD drive is not defective.

  A question:
  You use the Toshiba HD DVD player?
  You could try to update from Toshiba's HD DVD player with the update published on the Qosmio G30.
  There is an update of this utility, and the original version must be installed to perform this update!

  Maybe this will help.

• Satellite P200-1EE: How can I activate my Bluetooth

  How can I activate my bluetooth on I don't can't find it.
  I have BT on the bottom of my laptop and it's also on the box, but I can't find it.

  Any help would be greatly appreciated.

  Satellite P200-1EE PSPB6E-0GM028EN was not equipped with the BT module ;)
  SO you will not be able to start!

  If you want to use BT technology, then you could try t use an external USB BT stick.

  Good bye

• Increases brightness screen Satellite P200-1EE

  Hello, I received by Satellite P200-1EE with Windows Vista Home Premium.

  Some time ago I found that the screen itself become very bright. Usually after one or two hours, sometimes faster after coming back from the screen saver. Yet it's brighter, then I can set up using windows options or functional keys, I see not too much on the screen then. What can cause this problem?

  I hope that there is no hardware problem. Help, please.

  Hello

  This means that the brightness of the display will change automatically?

  Well, it's really hard to say why this is happening. Normally, you set a certain point for the brightness of the screen in each power profile, for example, symmetrical or optimized battery.
  Check it!

  Also, make sure that all Windows updates are installed.
  In addition, I would recommend updating BIOS. You can find it on the Toshiba site.

  Good bye

• Satellite P200-1EE has built-in BT?

  This will sound like a really stupid question (coming from someone who has worked in the computer industry)...

  I saw a lot of mention on the ' * Bluetooth *' feature, but * how do I know for certain if my 'lappy' it has *, _ * or * _ even better * if he was ever installation * for it
  (I have a * Satellite P200-1EE *-if that makes a difference)?

  Are there BT labels at the bottom of the unit?
  If not-> then it is NOT of Bluetooth
  If yes-> while the laptop supports the BT and can be activated using the FN + F8 keys

• CD and DVD is not a game on my Satellite P200-1EE laptop

  Hello I have a Satellite P200-1EE laptop

  My problem is that it won't read any CD or DVD, he repeats to me that there is no driver, someone know the answer to that?

  Its new brand

  Hello

  What you mean there's no driver?
  The optical disk drive is listed in Windows Explorer?
  What is the status in Device Manager?

• Satellite P200-1EE does not properly of the HD-DVD play

  Hello

  My Satellite P200 - 1EE laptop doesn t play DVD s correctly when the DVD loads up it plays but stops and starts as a 'jump' CD and the dubbing is very bad.
  So, I tried the setting on my DVD player program but made no difference at all

  I think HD-DVD player is broken.
  Can someone help?

  Hello

  I guess you are trying to read HD DVD using the HD DVD from Toshiba player.
  Am I wrong?

  So first of all, you should try to update your HD Toshiba DVD player software.
  Then, check if the HD-DVD player firmware update is possible.

  The two parties, you should find on the European driver Toshiba page!

  I noticed that Toshiba updated own HD-DVD player software and that has solved several problems about the HD-DVD playback.

  Good luck & best regards

• Satellite P200 1EE problems with playback HD video and USB ports

  I bought the laptop Satellite P200-1EE dixons for and I'm happy with it in many ways, but the main reason I bought the 1EE P200 was because of its potential to play and edit the video high defintion.

  I can't seem to play or watch video clips high definition without them being clumsy and with a frequency of images at 3 frames per second, and not the 30 frames per second, he must turn.

  The clips I'm playing are some MOV files record on my camera at 1280 by 720 resolution at 30 frames per second and the two Quictkime player and Realplayer they simply are not quite smooth. Given that the laptop has a DVD player high definition and a high-end graphics card ATI HD 2600 ispecifically intentional for high defintion watch a DVD high defintion to 2040 by 1080 I do not understand why he should fight with playback relatively low resolution video files.

  I would edit 720 video high definition and the speed of the processor, the speed of the bus, ram and graphics card should be enough for this high defintion video simple editing, so if he can not even play video high defintion, what chance does he have to edit video high defintion?

  After only 2 days of working completely fine Vista Vista completely crushed and the computer refused to restart. I had to use the recovery disk and completely wipe the hard drive. not a good introduction to vista which, apart from that, it was very slippery. After you have installed Office 2003 it works completely fine on Vista Home premium

  Does anyone have suggestions or solutions?

  Hi Daniel

  To be honest you message confuses me.
  The recorded movies (.mov files) are not format true high definition as in movies on HD DVD or Blue ray!

  I think you need to convert these files first in a format mpeg mov or avi format and then you can try to play with ordinary players like WMP, Real player, etc.

  Here are some useful tools;

  Converts mov to mpeg
  http://www.radgametools.com/binkhcon.htm

  Convert mov to avi
  http://www.JakeLudington.com/ask_jake/20051003_convert_mov_to_avi.html

  With regard to the question of the USB.
  Try to remove the USB port on the Device Manager and restart the laptop. After restarting again the USB ports should be recognized again and the USB driver should be updated.
  In most cases, this enables the USB flash drive.