Satellite P200-1JV failure

Similar Questions

• Advice on which necessary to a Satellite P200-1JV driver

  Hello

  I have a Satellite P200-1jv (PSPB6E) and miss a driver after a format for a mass storage controller.

  If someone can advise which driver should I install?

  THX vinnygreg

  XP or Vista?

  Did you install a copy of Windows Street?

• Satellite P200-1JV - screen begins to blink in different times

  Hello!

  I am owner of a Satellite P200-1JV since last week and three days ago I had a strange problem.
  My laptop * screen starts flashing * in different times.

  The flash frequency increases by 3.4 times to 10 +.
  In addition, the number of times to flash occurrence increases significantly.

  The blinking persists even if I do * not * activate any program.
  All programs are by default.

  Everyone knows the same problem before? Any solution?
  The graphic problem (ATI Mobility Radeon HD2600)? Or is it a manufacturing problem?

  Could you please help me?
  Thanks for in advance!

  What do you mean by manufacturing problem?

  It very difficult to imagine that how the display flashes or what might the case these flashing but it certainly looks like a hardware problem.

  If its hardware issue you will need to contact a technician from Toshiba for a fix. I think it's clear

  The P200 seems to be a new laptop and my knowledge, the guarantee must cover all
  So, don t waste time and ask an ASP in your country for a control from laptop

  Good bye

• Satellite P200-1JV: A DVD from Toshiba drive - unable to output video...

  Hello

  I just signed up so forgive me if I posted this question in the wrong place.

  I have a Satellite P200-1jv and I could read the dvd on it without problem. Now when I try to play a dvd using the Toshiba player, I get a message coming indicating + * impossible at the exit of the video on an external device. Please change your device display by pressing Fn + F5 keys after the end of this application + *.

  I'm trying this and lcd comes but never changes. What I am doing wrong?

  Thanks for your help.

  Stretchmo

  Hello

  I think I can help and I found a solution.

  I recalled to this topic and searched a bit here in the forum and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726𜀦

  Jack Black has posted a link to the document from Toshiba which describes exactly this problem and offers a solution.

  The problem can be solved by updating the Realtek Audio driver.
  You can download the driver from his most recent on the Realtek site and may reinstall it.

  Concerning

• Satellite P200-1JV of music rises like a sound card will not play

  I have a toshiba Satellite P200-1JV and I'm on spotify (music player)
  Music is coming as a flaw of the sound card and will not play. Little play and it's a little bit distorted.

  Are there updates/drivers sound card I should be downloading?

  Sorry to be thick. And thanks for any answers

  Stretchmo

  Hello!

  To be honest, it looks like bad equalizer settings, so try to reset as Akuma said.
  And by the way, do you have the same problem with external speakers?

  In your case, I will try to update the audio drivers. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I hope it works for you!

  Good bye

• Question about battery on Satellite P200-1JV

  Can someone answer this question please: what Satellite P200 battery and battery recharging happens at 100% load, and the light is blue are there continuing fees to the battery or does the pc disconnect the load?

  I ask this question because my laptop is plugged in for long periods of time and I don't want to fry the battery because 99% of the time its used as a desktop pc.

  Hello!

  Have you checked the manual for more information? I downloaded it on the Toshiba site because I have another model and I can find the following information on the LED power:
  + In normal operating mode, the power light is blue (depending on the model you have purchased). If the system is in Standby Mode, the LED flashes orange, while the light is off when the computer is turned off or in Hibernation mode. +

  I put t know if this information is useful for you, but if the laptop is connected with the adapter AC/DC battery will not be used.

  Good bye

• Satellite P200 - 1JV - installation of HD DVD software does not

  I try to install the software HD DVD (drive) on my laptop and I get the message error "this application cannot be installed on this computer.
  I know that I have the HD player. I'm using Vista SP1 and install the correct drivers. My firmware is - SD - L802B (TO01). I couldn't find anywhere to update. I use the newest BIOS for laptop.

  Any ideas would be great.
  Will be

  You have a Toshiba recovery media for your laptop model.
  I know it sounds stupid now but the recovery images include an HD DVD player and you can have if you install OS using this recovery media.

  To be honest, your question is strange. I have Satellite P200D without HD DVD drive, but I managed to install a HD Toshiba DVD player to this topic. No problem at all.

  You have a Toshiba DVD drive installed on your laptop?

• Satellite P200-1JV - tough screen very bright

  Hi guys

  I've had this laptop for centuries without problems. But lately the screen went bright. Happens every two days and the F6/F7 keys do not work for this problem, actually they don't work at all. :(

  It can stay for 10 minutes and do or in hours, and then this. I have to restart the laptop to clean.

  Help me please. Laughing out loud

  Hi stretch,

  Very bright, means that the display jumps to highest brightness of the screen as if you were using the FN + F7 key combination to enhance the brightness?

  Have you checked the brightness of the screen in Windows power management?

  What operating system you are using? Maybe you need to update the VAP and utility Support Flash Cards to use the FN keys again.

• Satellite Pro P200-1JV - how to reset to factory settings?

  Hello

  I'm trying to reset my Satellite Pro P200-1JV to factory settings. I tried pressing reset and turn on, also tried pressing F8 and turn on and no system recovery doesn't happen as I was told that it should.

  I put everything in place of discs with it and it's a Vista operating system.

  Help, please!

  Thank you!

  Al

  Hi alanmanley,

  Why you press the zero key to restore factory settings?
  You can restore the factory settings if you go into the advanced Windows (F8) boot menu and select Repair my computer. Then will begin the recovery of HARD drive and reinstall Windows.

  In addition, this option is available on OS preinstalled Toshiba and the recovery disc, that you create yourself as mentioned in the user manual.

  Last but not least check this article:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• Satellite P200-1 b 6: Sound Driver update fails, and HD-DVD player does not work

  I just bought a laptop Satellite P200-1 b 6 and spent the day installing the updates recommended by the TEMPO programme. One of them was an update of RealTek audio driver but on run this it fails at about 80% of the way through with an error: "install Realtek HD Audio Driver failure!

  Now, the reader of HD DVD, Toshiba will fail with an error "unable to output the video to an external device.

  Please change your display keys of the device by pressing the Fn + F5 after the end of the application "." I tried this but it seems to have no effect.

  I'm now regretting starting to update the drivers installed. Should I try to rebuild the machine using the recovery discs or is there another solution that someone found? Or if others have found the upgrade work?

  All advice welcome

  Hello

  When I started using PC, one of my friends told me something: do not touch the well-executed system. I know that you, like so many other people out there, have updated things but as you can see, it can go in the wrong direction.

  This TEMPO software is good, but if all goes well the leave it as it is. What you can try is to use the System Restore tool and move the BONES to earlier time and hope everything will be OK again.

  Please post the result.

• Cannot format second HARD on a Satellite P200-13 s PSPBGE drive

  Nice day

  I have a s system of Satellite P200-13 friends in front of me who was reinstalled using the recovery CD.
  It took me some time to update the operating system (Vista Home Premium SP1) after that and so on.
  I've also renewed the BIOS. The system seems stable, everything is on a green status but I have a problem.

  This system has got 2 hard drives, C:\ on which runs the operating system and programs are installed and there is therefore a 2nd HARD drive D:\.
  Now, if I look in the hardware Manager or disk management tool, I can see this disc and it says that it is functional and ready but the disc needs to be formatted before using it, which seems logical, of course.

  When I try to format the formatting begins, but after a few seconds, I get a message that there have been a failure and it cannot be formatted. The State of the disk is still no failures.

  What is a defect in the disc itself? He was untouched and has worked before.
  Thanks for any help or idea.
  Dany

  Hello

  How have you tried to format this HARD drive?
  You can describe it in the steps of the view?

  The HARD drives are usually already formatted and you don't need to format it again...
  Check if you can access the second HDD and save files on it!

• Problem with the Broadcom BCM70010 on Satellite P200-123 video decoder

  I ran the Broadcom DiagTool.exe, getting several shortcomings, including the Version Compatibility Test.

  It's on a Satellite P200-123 part number: PSPB6E-02L028EN, Vista Home Premium 32-bit.

  Says Vista Driver version 2.14.4 Device Manager & "this device works correctly.

  Version 2.14.4 is the only Decoder driver Broadcom available on the Toshiba for Satellite PSPB6E-02L028EN site.

  I wonder what to try next.

  Thanks for any help.

  ================================================== =====================================
  Broadcom high definition video Decoder Utility.
  2009-12-11 11:12:50

  ----------------------------------------------
  Details of the software.
  Product version: 2.6.40.1
  Driver version: 2.14.0.4
  Library API Version: 2.17.0.0
  Firmware Version: 2.14.7.1 / 0.0.0.0

  ----------------------------------------------
  Details of the material.
  Name of the decoder: BOUZHAM 970010
  Room type: Mini PCIe Card
  Review ID: 0x31B000FB
  Serial number: n/a

  ----------------------------------------------
  Results of the tests.
  Version compatibility test: fail.
  Registered control Test: pass.
  Non Volatile Memory test: not support on bulldozer.
  DDR memory test: pass.
  FW download Test: pass.
  DMA entry Test: fail.
  DMA Test output: failure.
  DMA CRC Test output: failure.

  ================================================== =====================================

  Hello

  Laptop manufacturer is obliged to support the Broadcom DiagTool?
  What Broadcom support on this issue? Have you contacted their support?

  I mean they have to have the best experience with own products. It has probably been tested on different hardware platforms for mobile computing.

• Satellite P200-144 - lost profile user & Running very, very slowly

  Hi, please excuse my explaniation below, but I'm not very technical interest and need help?

  I have a Satellite P200-144 curries in Sep 07 was bought for my college courses. I listened to a CD of night via windows media player. CD proceeded to freeze and then I got an error message something in the sense of "windows media player database corrupted", then the machine stops. When it restarts itself, my user profile and associated parameters have disappeared (as well as my documents, music, photsos etc.). Once the machine booted, I log in under my usual profile, but he told me that my profile would not load correctly and I've been signed by using a temporary profile? In addition, the machine seems to have trouble doing anything at any great speed; each individual operation is taking an absolute age... to open the internet browser is as slow as dial-up almopst and I am supposed to have high-speed broadband! The machine makes a quiet rattling noise that was not previously; someone suggested maybe it's my hard drive?

  On the advice of the internet and others, I tried the following:
  Creating a new user and copy my user data-error message back sying this did not succeed.
  Twp machine restoring previous dates separated - "error unidentified" who did not do so.

  Please help... anyone?

  > The machine makes a quiet rattling noise that was not previously. someone suggested maybe it's my hard drive?
  Hmm, HARD drive failure is possible... maybe some bad sectors in the partition or HARD drive, however, this is only speculation and a new installation of operating system from the recovery CD would be necessary and advisable to ensure that this is not a HARD drive problem.

  Of course you should backup you files and important data because this procedure would format the HARD drive.

  I know it's a radical procedure, but it is necessary to make sure if the problem is hardware or software associates.

  Good luck and best regards

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.

• HARD drive and memory upgrade on the Satellite P200 - 17 c

  Hello

  I own Satellite P200 17 c. My current memory is DDR2 PC2-5300 2 GB. I would like to upgrade to DDR2 PC2 - 6400 4 GB of ram. I can do and it's going to be some speed improvements, if I update to PC2-6400 PC2-5300 instead?

  I have 2 hard drives on my P200 17 c. 2 x 100 GB. I want to upgrade one of these two HD ranging from 100 GB to 320 GB 5400 RPM. can I do this? and it'll be a difference if I update with HD who has 7200 RPM?

  Thank you

  First of all: your machine is able to handle a maximum capacity of 4 GB RAM, but please be aware that you won´t be able to use all of the 4 GB due to some limitations of the chipset that are explained in the following article: http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  Regarding the speed of module: chipset specifications are defined for PC5300, so it will not improve your speed when you install faster modules.

  If you want to upgrade your hard drive then do as you like, because it shouldn´t be any restrictions, you can install a drive with 7200 RPM with a slower.

  The only difference will be that the faster drive faster. The performance of the entire system would increase only when you´re install your operating system on the disk more fast (which is the recommendation of my side :))