Satellite Pro P200-1JV - how to reset to factory settings?

Similar Questions

• Satellite Pro P200-HD: how to use it with Win XP

  Recently, I received the new Satellite Pro P200 HD of Getech. I asked Getech to change the XP operating system because my University will not support Vista. I was told that some features are lost with XP, such as the hot key utility and I agreed to go ahead.

  However, I was not informed that the sound is scratchy and the video will behave as if I play a scratched CD.
  It is true with windows sounds as well. I was not able to enjoy the music or video. I have all the drivers updated and the new Bios XP released recently has been updated.

  Please does anyone know someone using this model with XP as an operating system with the sound and video works properly?
  This would mean that I was sold a laptop with a defective sound equipment and should get a replacement because I had this problem from day one.

  Thanks for the help in advance.
  Calvin

  * @ Vivien *.

  How about this:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  There, you might choose the satellite Pro P200 to download XP drivers

• Satellite Pro P200-1MA: how to disable battery beeps less than 10%?

  I use my laptop (Satellite Pro P200-1MA) especially indoors, connected to the outlet, but because I am a student I travel on a regular basis and usually I watch movies during this time. About an hour and a half in the recall of battery low film begins making movies for the last 10-15 minutes completely unbearable. That is why it is of absolute importance for me to find a way to disable this callback no value. Thanks in advance.

  Have you ever tried to find these settings only?

  Please don't be crazy on me, but it's really raise what you're asking here. You need not more than 2 minutes to find a way to reduce the critical battery level.

• Satellite A300 - how to reset to factory settings?

  Hello everyone,

  first of all, sorry for my English, it is not my native language and I do a lot of mistakes, I hope you can understand me correctly.

  My problem is that I have a toshiba Satellite A300 provided with Windows Vista op time after I have bought I installed windows 7 on it (you know, so new that I have to try). Now, my problem is I want to reset my phone. I have the recovery disks, and the folder HDDRecovery D: but my computer cannot read.

  What can I do? I tried a lot of things... How can I reboot my computer to factory settings?

  Hope you can help me,

  Best regards.

  Hi biguri,.

  After the installation of another operating system, you will need to use the Toshiba Recovery disk to restore to factory settings. That means Vista preloaded with all the drivers and tools you get back if you boot from the recovery disc and follow the on-screen instructions.

  But don't forget to make a backup of the important files like photos, videos, etc., because the recovery disk will wipe the entire HARD disk.

  You have problems with the recovery disk?

• Satellite L30 - 10Y - how to reset to factory settings?

  Hello

  I have a Toshiba Satellite L30 - 10Y, I want to back to factory setting, but how can I do this?

  Thank you
  Niall

  Hi prescott91,

  You have the Toshiba Recovery disk? If so, it is very easy: just boot from that disk and follow the instructions on the screen. The recovery disk will delete the whole HARD disk restore factory settings and then recreate the partitions.
  So if you have important data on it, make a backup of it if not already done.

  But it is also described in your user manual. Have a look at. It s interesting documentation. ;)

• Satellite A200-195 - you try to reset to factory settings

  Hello

  After you have backed up all my data, I'm trying to reset my Toshiba Satellite A200-195 back to factory settings, to try to get some of the performance. Internet search has launched a number of ways to do this, but none do not work for me.

  I tried now button 0/F1/F8 when switching on the PC until I get the beeps. But then, the only options I get are safe mode, safe mode with networking or start Windows normally.

  I pressed the F8 key the time Toshiba screen upwards and got through a number of options, including the repair of the system. However, after selecting that, when the dialog box appears, these are all the options I get

  1 Startup Repair tool
  2 system restore
  3 Windows complete PC Restore
  4 Windows Memory Diagnostic tool
  Command prompt 5
  6 restore the full Windows operating system.

  There is nothing obviously suggests a Toshiba Assistant or mentions the factory settings. I tried the last option, which brings up a dialog box telling me that if the pre-installed files are corrput I can use the recovery disks and just the OK option. After clicking on OK nothing happens. I tried several times, but each time waived forward and pressed the stop down or restart buttons.

  I also tried the first 3 options, but none of them gave me an option to reset the default or the other.

  I have no recovery disks and I saw searched the help files for the system backup, can't find anyway to create them - only standard data file backups.

  I don't have any disks that came with the laptop.

  I am running Windows Vista Home Premium.

  Can anyone suggest anything, that I have not tried yet please? PLEASE?

  Thank you. :)

  Obviously the HDD recovery partition isn t available on the HARD disk and, therefore, you will not be able to perform HARD drive recovery procedure.

  To retrieve the computer laptop back to factory settings, recovery disk should be used.
  If you n t own this disc, try to order the support on this page:
  http://backupmedia.Toshiba.EU/landing.aspx

  But in case the laptop is too old, you will not be able to order this support more.

• TouchSmart 310-1020 how to reset to factory settings

  I just bought a hp 310-1020 a friend... I knew who buy it he lost the password key disk. How can I reset back without the administration of windows code 7.

  is what OS this?  If it's windows 8, there's all this that new view dekstop watch if she will likely w7

  for w7, I know if f11 or f10 you can press start the system upward after him disappears from the HP logo on the touch screen, but for me I would be (being old timer) have a usb keyboard plugged to the top before restarting and you maybe able to do it from the physical keyboard

  OK to restore the pc restart or start and the HP logo disappears prest f11 or f10 and hold the button for a few seconds

  and there should be a restore mode command prompt

  If she window 8, then I don't know not sorry and until I get a w8 pc and then I know more about and sorry

• Re: How can I add a second internal hard drive to a Satellite Pro P200?

  I have a Satellite Pro P200 with a single internal hard drive. There is a second Bay in the computer of another internal hard drive, but I couldn't find any information about it. There is enough space for a 2.5 "SATA but I do not see a connector.

  I contacted Toshiba Dutch customer service who said that it was official policy not to provide any information on a second internal drive. They also said that they would not provide parts to make it possible.

  Can anyone provide more information?

  Hello!

  I think that if there is no connector you cannot add a second HDD.
  It of Nice to have a second Bay, but it's nothing without a connector.

  Good bye

• Failure of the BIOS - Satellite Pro P200 - 16 c

  I installed Windows 7 64 bit on a laptop Satellite Pro P200 today. I then tried flashing the BIOS through windows with program Flash BIOS on Toshiba driver download page. I used the program flash for Vista because none is available for Windows 7. The program started and took a backup of my old version of BIOS and then Flash the BIOS. Then after a while an error occurred saying that this operating system was not supported.

  Alright. I restarted the computer and he was going to access the BIOS to see if the new version was done to install or not. But I can't access the BIOS now since the TI of suddenly password protected. I tried Google known standard Phoenix BIOS passwords, but they do not work. Now I've mistyped the password if often the computer won't let me even start without entering a correct password.

  How can I reset the BIOS? Should I open the laptop and remove the CMOS battery? Which will work?

  Help, please...

  Hello

  You used not compatible BIOS and it seems that module ROM BIOS was not flashed properly.
  Unfortunately, there is nothing to do but to contact the ASP of Toshiba in your country,
  Guys could remove the password and can reflash the BIOS using a traditional disk BIOS version and the crisis.

  > How can I reset the BIOS? Should I open the laptop and remove the CMOS battery? Which will work?
  No, remove the CMOS battery would not help because as far as I know that the CMOS battery is not removable on laptops just ASP can clear the BIOS password.

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• Satellite Pro P200-150 - where to find drivers for Win 7

  I have a PC Satellite Pro P200-150 with Vista Business bought in 10/2007.
  I want to change the hard drive 250 GB, I want to take this opportunity to pass on Windows 7 Home Premium Version.
  I'll buy a load of DVD.

  My question is: How can I get the drivers, but especially utilities Toshiba?
  On sites that I've explored I find driver downloads but no public services.

  Thank you for your response.

  Hello

  Check the Satellite Pro P200 driver download area.
  You will find all the drivers Win 7.

  Note: the P200 is a little older series you must choose in the Archive of the Type of product to get the drivers

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• No software DVD player with my new Satellite Pro P200

  Just bought a new Satellite Pro P200 and, to my surprise and dismay, it has software player DVD No. inside? I downloaded the DVD drive on the official download here, but Vista abandoned the facility saying that I can not install the application. Have you tried to configure it as a Admin, but the same message is given running.

  Suggestions as to how I can get the software to run movies DVD on the new laptop computer would be most appreciated.

  The laptop is model is PSPB7E, it has Vista Business installed and has a HD-DVD drive installed.

  Would apprecate a response early to what I already plan to return this item, demanding a full refund since it seems that it does NOT use a software which SHOULD run (IE. Compatible versions of some software XP will simply not installed because Vista blocks!).

  Kamshot - discouraged by the new culture of 'Vista '!

  Hi Kam

  As far as I know every Toshiba laptop comes with pre-installed software allows you to watch DVD movies. It is a part of the standard installation and the application is called WinDVD.

  According to the specifications of the laptop, your laptop has no HD DVD player, just DVD-Super Multi (+ r DL). Because of this there is no HD DVD player.

  > Would apprecate a early response to what I already plan to return this item and requesting a full refund because it > seems that it does NOT use a software which SHOULD run

  No comments for this

• Recording on Satellite Pro P200

  How can I connect an audio mixing table, record of my Satellite Pro P200? I have Cakewalk Sonar.
  Thank you!

  Hello

  If you want to do this on a professional path you should look for more information on the net and maybe check some forums on the audio/video support. These things have nothing to do with specific for laptop or desktop manufacturers.
  As Homer written you can use an audio cable and connect it to the microphone port on your desktop. I don't know how it will work with your software. You can also use external devices like this.

  As I've written before, use Google and see what others wrote about the experiences in various media forums.

• Satellite Pro P200-14W and WXP - no driver for PC memory controller

  I installed Windows XP on the Satellite Pro P200-14W and installed all the drivers I could find on the Web of Toshiba site following the instructions provided.

  I always have a controller memory PC that appear in hardware Manager who is not driver related to it.

  My main problem however is that at random intervals (sometimes when you pull the power cable) the defects of the screen and turns into a mess of the desktop computer and the computer must be restarted because it does more. I tried several types of graphics drivers, but this does not stop the problem.

  Any ideas on how to solve this problem would be greatly appreciated.

  If you have installed XP on this laptop Vista you must also update the BIOS to the version of Windows XP.
  Seems that at this time it s a 5.00Win version of the BIOS.

  To get rid of the yellow exclamation mark in Device Manager, you must install the
  Flash Media Driver. This is the driver for your bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Good bye