Satellite P300-1GL battery falls to 85% when you unplug the charger

Similar Questions

• Half the Office disappears when you unplug the external monitor

  I have a MacBook (early 2011) with a single office shared between two monitors - with one hand on the internal screen and the other half on a Dell 23 inch. The Dell is my first when I use both at the same time. Until a few months ago, when I unplugged the external monitor, all windows automatically appears in the monitor to the laptop, including the menu bar and dock.

  After an operating system upgraded a few dos systems (I'm on version of El Capitan.6), when I unplug the screen seems not to register - in other words, the left side of my office, including the menu bar and the dock, and all the apps that were there just to disappear. So my laptop seems to think that the other view is always connected and direct, unless I restart with the detached monitor. (I unchecked 'Displays have separated spaces') in Mission Control.

  Is that what I can do to force the Office to redesign the internal screen? (Note that the display is a Dell S2330MX, which seem not to support any Mac OS - so who could answer the question here.) Thank you

  I've known who issues from time to time, try to close and reopen the lid, which needs to redraw your office.

• Blue screen when you unplug the power of the computer dell laptop XP

  I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

  Hello suncoastsrq,

  Usually, when we see problems during shutdown, the cause is something that loads at startup.

  To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

  You can download the dump Auggy's previous suggestion?

  Let us know.

  Best regards

  Matthew_Ha

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• Satellite C series - cursor will move only when you press the trackpad button

  Cursor on my mousepad suddenly stopped moving unless I have push button left or right, the cushion itself is not locked (fn + f5).

  Please help this is driving me crazy. I tried to uninstall drivers and reinstall but still will not work

  This behavior is very strange.
  Can you please tell us which model of laptop you have, what OS you are using and since when did you notice this problem?

  You use an external mouse at this time?
  When you open Mouse Properties try please use option restore all default values.
  If the problem persists, you can try to reinstall OS (recovery image) and test the functionality with the factory settings.

  In the case that the same problem my only explanation is that must be material junk.

• Problems loading of the ipad. When you insert the charging cable, it must be at a certain angle to recharge.

  When you try to load the mini ipad cable must be in a particular angle to register as a load.  This area can be changed?

  Take a flashlight and if possible a magnifying glass and control lightning port on the iPad. See if there is any dirt, debris, lint etc in the port which could impact on insertion of the plug of the lightning. Otherwise, you can take a date-Genius Bar at the Apple store near having examined material. Be sure to bring the cable with you as well.

• Windows XP SP3 system crashes when you unplug the USB device

  the user has a laptop Dell Latitude D630 under Windows XP SP3.  In the last 2 weeks, the laptop started to hang when it unplug a USB device.  Click on the system tray icon to remove the device but the system gives breaks down.  That's all the info I have at this point.  What should I look for?  Does anyone have ideas on how to solve?  Thank you.

  How to crash the system?

  What is a blue screen crash?

  If so, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• LaserJet Pro 200 color MFP: print problems when you use the charger

  Copy and scan works very well when I place the original on the glas

  However, if I use the charger a straight black line appears from the top down in the middle of the copied or scanned document.

  How can I fix

  Thanks, MariusMo

  Hi MariusMo,

  I'm glad that the problem has been resolved with the cleaning.

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

• Satellite P300-1 has 8 - password requests when you turn

  Hello

  I bought a P300 Carphone Warehouse for years as my first laptop, but because I am not versed in computer things, I thought that he had broken causing buy me a new acer laptop.

  Yesterday, I found the laptop and tried to put on with a spare magazine and discovered that it was not the laptop, which was broken, but the actual charger wire has been damaged, so it worked yesterday but when I tried to turn it on this morning he asked me a password to 8 digits in a blue box.

  After 3 incorrect ones, it would be closed.
  A friend told me that it is a bios password and I was hoping if anyone knows the password because I threw away the manual who died in 2007.

  Thank you in advance!

  BIOS password is the individual password and not a standard password that you can find in manuals s or any other official document.
  Someone put this password and the laptop is now locked.
  All you can do is check the Toshiba authorized service provider and allow them to remove this password.

• Satellite L50-B-1NM - speakers turned off when you move the screen

  Hello

  yesterday, I got Toshiba L50-B-1NM.
  Everything seems to be ok except for one thing.
  Speakers to stop when the screen is slightly moved. There are positions of the screen, when they work, but just slightly push the screen and they are now closed. Movement of the screen has no impact on its external [helmet], is without a doubt the speakers or its connection.
  I wanted to use warranty, however, I am not sure if it covers this kind of defective. Anyone know?

  And he also said: [even if the warranty is still on]
  Product not available, unfortunately your product is currently not available so please contact your place of purchase.

  Thanks for help

  Thanks for your comments... Great that you can solve this problem

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• iPhone 6 s is not wake up when you remove the cable from the charger.

  Hi all.

  I noticed that sometimes my iPhone didn't wake not (the lock screen display) when the charging cable is removed. the charger / sync port seem otherwise works normally.

  Is this normal?  I'm guessing that this happens because sometimes when the battery is fully charged, no power goes to the phone and if you pull the cable then, the phone can't tell you have removed the cable, but I have not seen this happen on my previous phones.

  Thank you!

  Yes, this sounds like normal behavior! On my iPhone 6, when it reached 100% of their capacity and is completely loaded, as it stops in charge, which is why when you unplug the iPhone from the charger the screen does not automatically wake up, because the charger stopped output power to the iPhone when it finished filling. I hope that answers your question!

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• Satellite P300-1gn starts up it free or by touching the Mute button

  My satellite P300 1gn starts that it self.
  It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated?

  I wonder that it is a hardware issue or a result of a virus?

  Help, please.

  Hey Buddy,

  It starts by itself from the standby or hibernation mode? Or when you turn the computer off completely?

  Have you tried to load the default settings in the BIOS?

  The laptop must usually start only when you press the power button. If it is an update of the BIOS might be useful in this case

• Satellite A100 - line number on the keyboard does not work when you enter the password

  I have an A100 / Pro A100 series satellite laptop, what ever that means.
  Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.
  It appears to the integer line, including BACKSPACE don't work.

  I can use the mouse to select and remove, but that leaves a mark of character in the password box.
  Other buttons work except the row number.

  If I need to connect an external keyboard to verify where I connect (if I can)?
  Any help would be great.

  Can I change the keyboard?

  Hello

  trying to connect a keyboard external usb to check it out. Yes, you can change the keyboard of laptop and it is not a complicated procedure.
  Details how to change keyboard, you can find here

  irisvista.com

  Welcome them