Satellite P300 giving "KRTOP is compressed" message at startup

Similar Questions

• Satellite P300-1FY - Message: Configfree does not work

  Hello

  I want to solve it is to you that I regularly receive a notification (menu of task status bar conFiGFrEE don't work), is a type of laptop Satellite P300-1FY, why do I receive the message and this than that?

  The problem may be caused by trojan or virus such as reported in other forum Toshiba us
  http://forums.Toshiba.com/T5/drivers...OT/TD-p/317426

  I recommend to uninstall the ConfigFree, then analyze and clean the system using antivirus software, but in addition you could clean the registry with CCleaner... after that you could reinstall the Configfree again...

• Satellite P300 guard crashing and giving me blue screens

  Hello

  I got a Satellite P300, running on Windows Vista home premium and its provided with a card ATI Mobility Radeon HD 3650.
  My laptop crashes and send me windows and blue screens said that it is the cause of ls my graphics driver and the eror message is Atikmdag.
  I've tried everything (I think), I re - installed windows but what I had to do a restore with the current settings, because in some cd a little way my F8 function does not work so I couldn't restore my windows from my hard drive.
  I also had the latest Ati drivers, it does not help either, I also re-installed and tried to run my laptop on windows drivers, it doesn't help either.

  I don't really know what to do, can anyone help me please?

  Are you sure you're running video drivers downloaded from a site of Toshiba? Unfortunately the drivers may not be the root of the problem, so it is important to eliminate as the cause. How to remove AMD recommended driver is [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of drivers Toshiba, then your laptop must be in a State also provided

  I would recommend that you look at this [how to troubleshoot display driver stopped responding and has recovered, errors of type ATIKMDAG.sys | http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]

• Satellite P300-1CN - error message when download of MSN messenger

  I recently updated my Satellite P300 - 1CN PSPCCE to Windows 7, after this everything seems to work ok but if I try to download msn messenger is comes up with an error saying the file may be corrupted hr: 0x8007000d.

  I am not the most technical of the world, but would like to know what I need to do on this issue!

  Help please!

  Hi Brian,.

  I think that it of really difficult to tell why you get an error when you download MSN messenger.
  Where do you download the Messenger? You should try MSN or Microsoft page.

  This will happen if you click on download or start the downloaded file?

  Have you noticed this behavior with other downloads too?

• Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

  Hello there;

  I use for my laptop Satellite P300-219 (PSPCCE) newly bought about a week now. When you type I can't help noticing, the place where I put my left hand, I want to say the empty space to the left of the touchpad, feels much too hot. I looked for the manual and I have learned that it is where the CPU.

  Then I searched for a way to measure the heat of CPU, and after having tested some programs with too many different measures, I led to believe that the 'CPUID hardware Manager"gives the best results, after you set the correct value TJUNCTION.

  Here are the steps I get today while typing this message:

  ACPI hardware monitor
  Temperature 0 45note ° C (112 ° F) [0xC6E] (THRM)

  Intel Mobile Core 2 Duo T6400 hardware monitor
  Temperature 0 56a ° C (° F 132a) 0 x [31] (Core #0)
  Temperature 1 54a ° C (° F 129a) 0 x [33] (Core #1).

  Monitor hardware ATI Mobility Radeon HD 3650
  53A temperature 0 ° C (° F 127a) (GPU Core)

  Hardware Hitachi HTS543232L9S monitor
  Temperature 0 37â? Â ° C (98A? Â ° F) (0 x 25) (Assembly)

  From now you mind, windows taskbar indicates that I use roughly about 15 & 35% CPU. After a little use, I even though the CPU heats by a maximum of 69a ° C.

  The truth is, I don't know what to do with these readings, is my laptop which works very well, or he has problems? Could someone please tell me what should be the optimal level of heat for a P300, or where I can learn?

  Thanks in advance.

  Hello

  In my opinion, everything is ok with your laptop, buddy and the temperatures are quite good. Don t be to worry about this!
  If your laptop could overheat, it would have to close or freeze immediately. If this isn't the case, everything is ok with the temperatures.

  What you can do is to change the cooling method in Windows power management. Here, you change between performance and battery optimized cooling.

  By the way: you should also clean your laptop at any time. I clean my laptop every 3-4 months using a jet of compressed air. This blows the dust from the cooling fans.

  Welcome them

• Cannot start from the CD in my Satellite P300-23F

  Hello

  I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

  When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

  I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

  No idea what's going on? Is it possible to make it work?

  Stand by.
  When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
  When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

  Maybe you can use the CD but not DVD. check it out please.

• DVD ROM is not working on Satellite P300

  IM under Vista Edition home premium and my DVD (TS-L633A) does not work on a Satellite P300 - 18M

  When I check in the Device Manager the dvd has a '!' next to her and an error message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to download the latest drivers on the site of toshiba and reinstalled but it still doesn't work. I removed from Device Manager and rebooted the laptop, but still no joy.
  Anyone have any ideas?

  Post edited by: stuckuser

  Hello

  Try to fix this suite this Toshiba document - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• Very loud beep on the Satellite P300-17R

  Satellite P300-17R: when my virusscanner (antivira) detects a virus or spyware it gives a signal very hard, and I mean very hard! In the program, I can't change the options of caution and close my sound card doesn't help either.

  Can someone help me get rid of this nuisance

  Post edited by: DKing

  *@razorrazor*
  This signals warning has nothing to do with the problem described in the other thread (link in your message)

  *@Broi*
  You can change the volume in Control Panel-> sounds-> read-> Speaker tab, then press the properties button-> Choose the level tab-> settings of PC beep at a lower level.

  Good bye

• Satellite P300 - steering wheel Volume control writing a series of C

  Good day to you all,.

  I have a satellite P300 and the wheel of the front volume control no longer work as before. Unable to adjust the volume, unless openind sound icon control. In addition, if I try to adapt (volume) while working with a word processor, a series of C is written on the page to the screen.
  What is happening and how to get it working properly again?

  Thanks a lot
  JCP34

  Hi JCP34,

  I found a similar thread on the same behavior on Satellite A300 and the solution was very simple: it's the dirt on the inside and with jet of compressed air, blow it. After that, it s working again.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=155238𥹦

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Satellite P300 - output HDMI does not connect to the model of TV Samsung LE32B450

  When I use the Toshiba "HDMI" out utility to connect my Satellite P300 - 19K to my Samsung LE35B450 TV, I get the message "it is only effective when the PC is connected to a TV set that supports HDMI control via the HDMI cable.

  Does anyone have a solution for this? My Samsung TV is newer and has 3 HDMI input jacks and the same result. Is there another driver from Toshiba not requiring this vibration control function? This seems hardly reasonable given that all I want to do is display & there is normally no 2 communication channels via a HDMI cable anyway.

  Thanks in advance for any help there.

  I m not 100% sure, but I think that in s manuals is described clearly that this tool is designed for use with Toshiba Regza TV. With other words, it is Toshiba specific function.

  If you want to have the photo on your standard procedure for TV use for this purpose connect the laptop to your TV using a HDMI cable, turn on the port HDMI (HDMI channel) on the TV and use the combination of keys FN + F5 to switch between laptop and TV.

• Satellite P300 - very slow

  I recently put a Satellite P300 from a guy on ebay, it seems to be very slow. Can anyone suggest what I can do?

  Thanks for your time and your help. (apart from him giving back lol)

  Hello

  What to say? I think that it of not possible to say something because nobody knows what operating system you are using and what things software you already have installed maybe you can add this information

  Usually these problems are related to the OS if a lot of software is installed. Therefore, it would be useful to reinstall Windows

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• Satellite P300 - 17Q: Installation of VAP - ID-ERR-NOTINSTALLTVALTZ

  Hello

  When I m install the value pack added to my Satellite P300 race - 17Q Windows Vista 64-bit Edition, I get the following error:
  'ID-ERR-NOTINSTALLTVALTZ-MESSAGE' as well as installation is to undo the changes. My Bios is updated.

  Y at - it something with my software or is it also to someone else?

  Hello!

  Toshiba value added Package is for your model only available for Vista 32 bit, not 64-bit.

  Therefore, there is no way to solve this problem. You have to wait for a 64-bit version appear.

  Good bye

• FN key does not work on my Satellite P300-1 c 8

  Hello

  I recently tried to reduce the brightness of my screen, bur after pressing the FN key, no icons - no option appeared. I tried the system restore; did not help.
  Looked at control panel - Toshiba help, clicked on the "accessibility" icon (because there are image FN on it) and has shown the error message: "this system cannot use Toshiba Accessibility.

  I wonder why it should not all of a sudden. I looked for a relevant software or a driver on the Support from Toshiba web page; without success. Please help me solve the problem. I got Toshiba Satellite P300-1 c 8, windows Vista 32-bit. Thank you.

  Hello

  Check please if the Flash cards feature is disabled in the settings of Flash Cards.
  You can find under the menu START > all programs > Toshiba > utilities.

  If it will not let me know. There are other radical method that should help you. ;)