Satellite P300/Q01 - buttons Mute & Media LED is dead.

Similar Questions

• Satellite A300 - 1JH PSAGLE: button Mute & Media Player do not work

  Hello.

  I own the specifications described. I install it on Windows 7 64-bit version.
  I have install driver Toshiba Value Package added. The buttons touch media worked awhile. I have setup my media player application too.

  Now all of a sudden the mute and media player application launch touch button does nothing.
  I try to reinstall the drivers and still the same problem. For a while, everything was functional and all of a sudden just 2 buttons do not work.
  The rest of the buttons are ok.

  I thank in advance your help.

  Hi mate

  To my knowledge, there is a more recent version of VAP for Win 7 64 bit

  I recommend the VAP in the driver download section released for other series laptops more recent.
  Before installing the new version, please remove the old version, clean the registry (CCleaner is a good tool) and after rebooting again, install the VAP.

  Welcome them

• Satellite P300 - control buttons do not work after cleaning keybord

  Hello

  I got a Thoshiba satellite P300. It has beautiful sensor Panel of media players (next end, top, etc.).

  After I cleaned my keyboard (pc was off) the controls do not have start working.
  In the Manager of devices without errors.

  I reinstall windows, but without success.

  What can be the problem?
  Is there a combination of keys that turn off this Panel?

  Thank you

  Just a question;

  How to clean the keyboard and how you installed the Windows operating system?
  Have you used the Toshiba Recovery disk / HARD drive recovery?
  Or have you installed a clean Windows operating system?

• Satellite L50DT-a - buttons Mute / Volume not working properly

  My L50Dt-a satellite suddenly had the Mute button change its function.

  When I'm Microsoft Windows it full screens page I'm on rather than turn the sound we or off. I've updated question 8.1 window and it worked very well. The only change I have made to the computer last week is a new Logitech wireless mouse.

  Please can anyone suggest how to get my buttons Mute / volume working properly again?

  Thank you.

  Hello

  "Depending on whether the special function mode" is enabled or disabled, you will need to press additional FN button to use the special function of Toshiba key.

  Please check this Toshiba document how to change the Mode of function keys
  https://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

  By the way; This mode can be changed in the BIOS also!

• Satellite U400-22n - how to change the button mute for Led lighting

  Hello

  I can't turn off lighting on shortcut keys. The shortcut key to disable the LED has decided to change himself to put on mute. Does anyone know how I can pass this mute button to turn off the lights, or simply how can I turn off?

  Thanks in advance,

  Andy

  Hello

  If you are using Vista, then you should have installed VAP (value added package).
  In Toshiba Assist-> optimize you will find the configuration of buttons of Toshiba utility.
  This utility allows you to configure the buttons again.

  You must choose your button and should point to the dimmer.exe file that is located in the folder C:\Program Files\Toshiba\TBS

  Assign the dimmer.exe to the light button and complete the configuration. This should help.

• Satellite M70-144 buttons of media?

  Hello fellow forum members: x
  I just installed * Windows7 * on my laptop, it's an almost 4 years * Satellite M70-144 * (PSM71E-01400LED).
  I don't know how to make my built in media player buttons. I don't see any missing hardware driver, but still nothing happen when I press them.
  I tried to install the * tiles for Mobility Center * (for 32-bit vista), but still no use, I don't even know if it's the right thing to download?

  So please help me get this problem.

  Kind regards

  Stefan +.

  It is a driver problem. I don't see any for W7 for your laptop. If those for Vista don't cut it, you probably will not going to be able to make it work.

• Satellite P850/05F - button Mute a delay of 1-2 sec

  Hi guys,.

  I come to me a laptop Toshiba Satellite P850/05F recently, everything is perfect and I love her not to mention that of one small problem which is quite annoying. If I press the "Mute" button that is "F11"key, the mute symbol comes up, but it takes about 2 seconds so he can actually mute. " If it is not instantaneous.

  I googled around and doesn't seem like everyone has the same problem or has a solution. I already reformatted and reinstalled WIndows back to the default values and also reinstalled the drivers, but the problem is still there.

  I was wondering if this is common and if there is something I could do to fix this? It's driving me crazy.

  Contact your dealer as soon as possible, to explain the situation and I hope that you will get the other machine.
  Good luck.

• Satellite P300-Q01 does not illuminate

  Hi all

  I was surfing the net a few hours ago, when my laptop just turned off.
  Since then, I tried taking the battery on the thing and used only the plug; but it does not work.

  I also tried out both the battery and mains Plug and tried pressing the button market for 30 seconds, then put the battery back, but that didn't work either.

  For the moment, when I plug in the plug thing there is no lights turn on by saying that I plugged it.
  I still have 3 weeks of warranty left.
  Are there tricks to turn this thing on, or will I have to refer to the warranty? (Note, the nearest town is 990 Km from here where I live)

  Thank you

  Hello

  You can try to remove the battery and unplug the AC adapter
  Then, wait about 1 hour and then reconnect the two parts.
  Then try to turn on the machine.

  If this will not help then you should get in touch with ASP in your country because this could be a serious hardware problem that could be repaired only by ASP.

  Good luck buddy!

• Satellite P300-16 t - power power LED blinking

  I replaced my old charger yesterday and when I plugged the new charger yesterday everything was fine, but when I plugged this morning the power led continues to blink continuously. I took the battery and everything all right, the power led remains lit.

  What I need to get a new battery or is there something else that needs to be replaced?

  A new charger the same previous specification?

• Satellite P300 - - what are product recovery discs contains Vista?

  I want to reformat my laptop, it's a Satellite P300... many things does not work more IE: System Restore and corrupt c drive

  (1) would be to reformat my laptop to fix those problems?

  (2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and 64-bit windows vista ulimate said.

  Is that mean they contain vista? (vista came pre installed

  (3) should I make a copy of the PRODUCT ID series vista on my system menu screen

  (4) how would these discs...

  I you thankful if you could help, its a super computer

  Conduct research on how to operate the discs, just want to make sure that they contain vista

  > 1) would be reformatting my laptop fix these problems?
  Probably yes

  (> 2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and said windows vista ultimate 64-bit.
  As far as I know that P300 was equipped with HARD drive recovery and Vista 32 bit was preinstalled. There should be an option that allows to recover the laptop using the recovery of HARD drive option. Press F8 when the laptop starts up. Then choose fix my computer and start HARD drive recovery.
  This should set the machine to factory settings. Finally, you can create a recovery disk using the Toshiba recovery disc Creator called preinstalled software.

  (> 3) should I make a copy of the PRODUCT ID series vista on my system menu screen
  You can do this, but as far as I know the Vista on the Toshiba Recovery disk is already enabled and you don t need the series keys.

  (> 4) how would these discs...
  Usually you have to boot from that disk

  PS; For more details you should read the user manual and must read the discussions in this forum!

• Satellite P300 - 148 Vista Ulimate - LED light button does not work

  My laptop model is Satellite P300-148.
  I reinstall system-vista Ultimate.

  However, after installation, my * mute button or LED light button * cannot be controlled by press mute.

  It's like, normally, when you press the mute, the light will be switched on or off.
  However, this is no answers when I press on it.

  I can only turn lighting on or off using Toshiba help.

  Also when I press the "play" button, the windows media player has no more answers.

  So is it a solution? Or drivers?
  Thanks for the reply.

  Hello

  I think that these buttons don t work properly due to the Vista Ultimate.
  I checked some threads here and it seems that the PPV that controls this Toshiba buttons don t support the ultimate or the ultimate doesn't fully support the VAP.

  But just a question;
  Did you check the Toshiba Assist-> Optimize-> Toshiba button Support?
  This tool allows you to configure the buttons. Maybe you should check this.

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• Satellite P300-1EJ - Mute button does not work

  Hello world

  Press mute on the media panel is no longer functional.
  I have the Satellite P300 1EJ.

  Help, please

  Hello!

  Is - it only the mute button not working or other buttons too?

  Normally you need for these buttons the Toshiba value added package if you are using Vista. I think you should try to reinstall. So to remove the older version, reboot the laptop and install the most recent version that you can download from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

  Good bye

• Satellite P300-1gn starts up it free or by touching the Mute button

  My satellite P300 1gn starts that it self.
  It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated?

  I wonder that it is a hardware issue or a result of a virus?

  Help, please.

  Hey Buddy,

  It starts by itself from the standby or hibernation mode? Or when you turn the computer off completely?

  Have you tried to load the default settings in the BIOS?

  The laptop must usually start only when you press the power button. If it is an update of the BIOS might be useful in this case

• Media buttons do not work in Satellite P300-21st using Win 7

  Hello

  After the turning off my laptop, last week, the buttons of media suddenly stopped working.
  The strange thing is that they are flashing all the time, even when the laptop is turned off.

  I downloaded the toshiba Web site VAP (although the version was a 2009 one, if there is a new one for my laptop please let me know. Maybe I can use a VAP, a similar model.
  My system is Windows 7

  the other weird thing is that I have disabled the option of the illumination of the F2 Setup but the media buttons are still on.

  I also tried taking the battery, etc., but nothing

  any ideas?

  Hello

  The VAP is a Toshiba Software and as far as I know, you can use the other version of VAP, which was released for other series of laptop.
  For example, you can use the VAP released for Satellite P500, P750 series or higher.

  But I m wondering why the s button led is always ON even though the lighting is disabled in the BIOS.

  > I also tried taking the battery, etc., but nothing
  It is also my idea unplug the power adapter, remove the battery, hold down power button / stop along 30 sec.
  Then connect the AC adapter and check the functionality of the multimedia buttons.