Satellite P50-A09M and partitions

Just recovered from a failed upgrade of Windows 10

And how many partitions I got reviews

1 TB harddrive Windows 8.1 mounted.

Recovery partitions

REC 1 GB
EFI 100M
REC 481 MB
CRE 450 MB
REC 10,92 Gb< this="" i="" think="" this="" is="" the="" main="" os="">

So why so many recovery Partitions?

Can someone explain

Thank you

Can you please send screenshots of your disk management? I just want to see how the partitions are listed and shown here.

Always is it that there are two recovery partitions. One belongs to the operating system itself and others (about 10 GB) is saved original recovery image.

Tags: Toshiba

Similar Questions

  • Satellite P50-A09M - Assist Office continues to stop

    New Satellite P50-A09M

    Just do a system restore no software loaded and get help Office has stopped working, is this normal software or just buggy... ?

    Thank you.

    >... is this normal or just buggy software... ?
    I did system restore to many times and I've never noticed anything like that. in general the system restore should not influence negative on preinstalled Toshiba tools and utilities.
    If certain software no longer works, there is a problem and it is not normal but as I can not say that it is a buggy software.

    On this virtual path, it is not possible to say why this is happening, but what you can try is to reinstall the office help. I guess this last version, which you can download from the Toshiba download page.

  • Satellite P50-A09M: dual boot Windows and a Linux distribution

    I've prepared a quick how-to showing how to install a Linux distribution on a P50-A09M alongside Windows. You can find it here: https://www.dropbox.com/s/wsr8d6ifhi...-A09M.pdf?dl=0

    I've updated the document. You can find it here: https://www.dropbox.com/s/snz1o7zh4t...09M_2.pdf?dl=0.

  • Satellite A660 - recovery and partitioning of the C drive

    I have an A660 running Win 7 (64-bit) and he always has to turn more slowly than I expected.

    I have a 450 GB C drive and would like to reformat the drive and partition to C and D.
    I want to make a full recovery and re-partition.

    The question is what someone did this and if so what are the steps?
    That is to say, first, then recover the partition or I partition and then recover?

    Thank you
    Ramin

    In my opinion, you create restore DVD first. Then install the recovery image using these discs and when the OS is finished set partitions on your laptop.

    After doing this, it can happen that you will not be able to use the disk HARD recovery option more but the DVD of recovery only if as a first step in the history please create these recovery disks.

  • Distribution of Linux on the P50-A09M Satellite

    I've prepared a quick how to dual-boot Windows and Linux on a P50-A09M Satellite distribution. You can find it here https://www.dropbox.com/s/wsr8d6ifhi...-A09M.pdf?dl=0.

    This thread is dead. I can't remove it. If you are interested in getting a Linux distro to work on Toshiba P50-A09M, see this thread. https://Forum.Toshiba.EU/showthread...x-distribution

  • Recovery of the P50-B-103 Satellite without losing created partitions

    Laptop: Satellite P50-B-103
    OS: Windows 8.1

    Hello

    I have created multiple partitions in my laptop Satellite P50-B-103 and I created the recovery DVDs 3.

    Now, I want to the recovery of the operating system and to ensure the partition that I created with therir files.
    When I tried the laptop with DVD recovery, I see that it is necessary to delete all partitions. Is it possible recovery remove computer laptop whitout my scores?

    Thank you.

    Hello

    In General, recovery image can be installed on two tracks:
    Recovery option - HARD drive (recovery image is on the HARD drive)
    -using the recovery DVDs

    When you use HDD recovery facility only C partition is deleted and the recovery image is installed. This option works with factory settings and structure partitions of origin.
    You changed the structure of the partitions and this option does not work, so it makes sense that you want to use created the recovery disc.

    Problem is that the image recovey procedure wants to create factory settings including the structure of the original partitions. Before recovery image installation starts the recovery of all the files will be copied to the HARD drive and then installed from there so I think that you can not install recovery image on partition defined without changing everything.

    Anyway, if there is a problem with your preinstalled operating system, reinstall the recovery image and then change the partitions again. It's not a big deal. You create recovery discs so structure of partitions of origin that includes the recovery image is not so important to you.
    Using recovery discs you can install recovery image whenever you want.

    Of course, before you start to install recovery image to data backup.

  • Cannot install driver nVidia and BSOD on Satellite P50 - A - 01

    I just bought a laptop Satellite P50 - A01D haymarket BingLee last Sunday.

    They pre-installed Win8 to machine. I don't like win8, I so format HDD and installed win7.

    Everything good in the beginning. Once intel displayer driver has been installed, I can not install the Nvidia driver.

    If my system installed nvidia driver will be overwritten. always a blue screen.

    I reinstalled win7 for 5 times, but the same thing happens again.

    someone help me

    THX

    I n t have experience with this machine, but after installed Win7 clean
    -Intel chipset SW installation utility
    -Intel rapid storage driver
    -Intel Management Engine interface
    -Driver Intel and nVidia Driver

    Did you use the install command?

  • Problem starting after the installation of the NTI Echo Satellite P50-B-11V

    Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

    Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
    Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

    Anyone facing this problem? Please advice if you have the time.
    I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

    Thanks fo your time.

    Posted by marianbur
    Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

    Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
    Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

    Anyone facing this problem? Please advice if you have the time.
    I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

    Thanks fo your time.

    Dear marianbur,

    New laptop having same problem here, is now stuck... Have you received still no solution?

    Greetz

  • Satellite P50 - B - 11 M - Ubuntu Linux usage

    Hello.

    I'm about to buy a Satellite P50 - B - 11 M, but I do not know if Ubuntu/Mint (that I use for work) works perfectly on this machine, since the Ubuntu Certified Desktop page does not list any machine of your brand.

    Can you help me? Someone test the machine on these operating systems? Toshiba after drivers on the Ubuntu repositories?

    Thank you.

    Hello

    Pending a response from the community, why not try?
    Ubuntu comes as a direct medium that allows you to run as a complete desktop experience without touching anything that is installed on your PC.
    You can then check that the devices work.

    Associated with Toshiba-drivers.
    Linux does not work on Windows in this sense. The drivers are rarely (Yes it happens, but very rare) provided as a separate download.
    They are normally included in the kernel packages which mean that they are available at the same time.

    Good luck and have fun!
    / Tom

  • Satellite P50 - C - 17 M - problem with games

    I just bought a new Satelitte P50 - C - 17 M with inteL HD integrated graphics cards and also an external of 950M from Nvidia geforce gtx I guess?

    I'm really not good at this sort of thing, anyway I chose it cos it was cheap for its specifications and also 8 GB of ram, I thought it would be good for a game until I buy a desktop computer. Ive changed all things need in Nvidia Panel so all my games and applications are using the graphics card from NVIDIA and I've also clocked it form 993 GPU in 1124, which is the highest before he goes to the overclocking I think.

    First I tried to play the way of exile and I was happy to see my FPS up to 250-300 fps, but then I kept getting spikes up to 10-20 fps that was not logical. I tried to find a solution online and people were saying that the game has race problem on Win10, but even when I ran it in compatibility with 7 or 8 it continued doing the same drop in FPS.

    So last night I tried to play FFXIV and kept the same past.

    My constant fps were 59-65, but then I would have up to 10-12 points. I asked my friends and they told me that my laptop probably evolves to the internal graphics card during the game on his own so the FPS will be declining.

    Is the any landmark known for the problem :/?

    Thanks in advance.

    In Christmas 2015 buy a laptop Toshiba Satellite P50 - c - 11 k.

    It was 2 times by the technical service for various reasons and 2 the main reason was properly fixed (a failure of hard drive and another failure on the LCD)

    Recently, I got in touch with the service center for a problem, I think that I started to use the computer. The computer has a large processor and a large graphic and when used separately team offers exceptional performance.

    But I have a big problem that makes it impossible to use it normally.
    At the point where I use the computer with any of the games I bought legally and cerciorandome that the equipment meets the performance requirements of leftovers too.

    Early on the game should be noted that the team starts to heat a lot, after 5 minutes starts to slow down excessively. Monitoring the software using the following can be seen:
    -FPS (frames per second) generated by the game remains stable for the first 60 minutes, running with absolute normality
    -The temperature of the CPU starts to soar, reaching his limit of 105 ° C 5 minutes
    -At this time, the FPS success until 10/11, remaining so until the processor retrieves the temperature of 80 ° C
    -FPS return to their normal level of 60 a few minutes more, everything works perfectly during these times.
    -At the time where the processor returns to reach 105 10/11 FPS again until that process is repeated constantly.
    -This error is played every 2 or 3 minutes of play, indifferently, resolution, quality graphics and everything what you can get for configure options of the games.

    Looking for information on different websites on the problem and its solution have found different information that points to a serious problem of computer design.
    Because the CPU and GPU share the same broadcaster at a time that the graph starts to render passes to the temperature of the CPU's are not fast enough to cool the coming collapse.

    http://laptopmedia.com/review/Toshib...per-mid-range/

    I raised this issue with the service the customer of Toshiba in Spain for a couple of times. The answer is:

    «The information I have available, they indicate that the laptop has been tested and left our cumplindo Center repair factory specifications.»
    We can do nothing else in your laptop because it meets all our references and diagnostics. "

    I feel that they do not read my emails

  • Very hot area of satellite P50-B-103

    My Satellite P50-B-103 became very hot in the area of the hand, where is RAM memory.,.
    I thought the problem is RAM and I am doing an upgrade to 16 GB.

    Here is a picture with hot zone

    Have you noticed that when running some applications of strong performance as a game?

    Usually, the heat dissipation is much higher apps running and so the laptop could be warmer.

  • When Windows 10 for Satellite P50 - has - 12 p?

    Hi all

    I own a Toshiba Satellite P50-A-12PBE, and I've been waiting a while for Windows 10 now. According to this page, Windows 10 will be released November 15 for my laptop. How is it, I have not seen any possibility to upgrade yet? I have run all the updates of Windows (mandatory + optional) and have booked the upgrade of Windows 10.
    I know that I can force the upgrade. I want to receive good sense that in a normal life, and I was wondering why I have not yet.
    Thanks in advance.

    Jeroen

    Received the message today, I do not understand why he has not received earlier. But I guess that this pretty much solves my main problem.

  • Satellite P50-A-144 - FN + z key does not work after update Win8.1

    Hello
    a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
    Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

    How could I solve this problem? It's my OCD tingle.

    Thanks for all the replies :D

    Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

    I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

    You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    Check it out.

  • Satellite P50-A-125 - boot UEFI Linux problem

    My profile:
    Model: Toshiba Satellite P50-A-125
    Current operating system: 8.1 Windows x 64 and Ubuntu 14.04

    I want to know what is the first file.efi was performed.
    And how I can change this file.

    I need it to create a grub_standalone.efi.
    News, I did _two thing to put my grub standalone.efi file running at startup:
    Prime: change the Windwos Master loader boot:

    ruioliveira s@nokia3310:$ sudo efibootmgr - v
    BootCurrent: 0000
    Timeout: 2 seconds
    BootOrder: 0006,0004,0005,0000,2003,2001,2002
    Boot0000 * HD (\EFI\grub\grubx64_standalone.efi)WINDOWS Windows Boot Manager file
    Boot0001 * UEFI: ACPI network map
    Boot0002 * UEFI: ACPI network map
    Boot0003 * file HD (\EFI\refind\refind_x64.efi)
    Boot0004 * ubuntu file HD (\EFI\ubuntu\shimx64.efi)
    Boot0005 * file HD UbuntuGnome (\EFI\ubuntuGnome\shimx64.efi)
    Boot0006 * file Grub HD (\EFI\grub\grubx64_standalone.efi)
    Boot2001 * EFI USB Device RC
    Boot2002 * EFI DVD/CDROM RC
    Boot2003 * EFI network RC

    Does not work.

    Second: change the file in EFI/Boot/Bootx64.efi to my grub_standAlone.cfg (rename it to bootx64.efi)

    ruioliveiras@nokia3310:$ ls/boot/efi/EFI/Boot
    bkpbootx64. EFI bootx64.efi bootx64.efi.back bootx64.efi.back.ubuntu fallback.efi grub.cfg

    Does not work too.
    I just need to put my .efi running in the starup
    Thank you all

    Hello
    Can you tell us what your problem is? I have seen a lot of technical stuff, but do not clearly understand your problem.
    If you are having problems to start Ubuntu in an Efi / UEFI environment I suggest you try copying the file to start the live-media / installation in your startup folder media.
    Please note that the suggestion is not detailed must apply little reason.

    Tom Nr

  • Re: Satellite P50-A14G - unable to connect to the internet using a wired connection

    On my laptop, Satellite P50-A14-G, I can't connect to internet via wired connections.

    WiFi does not work properly, but not the Ethernet card. It has not any light when I connect the wire, and I realized that on the Panel of the map icon does not appear.
    My OS is Windows 8.1 update 1.

    Hello

    Have you checked status LAN card in Device Manager?
    Please make sure you that network card installed, listed and active properly.

Maybe you are looking for

  • How to fix the yahoo toolbar

    My yahoo toolbar is not editable, and is essentially useless. The button refresh does not work, and none of the icons (apps) are ones I used to have. Yahoo instructions suggest using the sign, which doesn't seem so. I've seen other people with simila

  • Remove not right iMessage number of digits of the phone.

    I'm trying to unregister the iMessage to https://selfsolve.apple.com/deregister-imessage.  However when I simply enter the mobile phone number as a local number, it says "Please enter a valid phone number."  When I enter the mobile number with countr

  • I continually get HP connection error.

    Recently, when you try to access the websites of my emails, I continually get 'Connection HP error' screen 'Google Chrome cannot display the webpage ".  Chrome is my default browser.  Outlook is my default Email.  When I try another browser, I can ac

  • X 1 carbon tap for the Thinkpad touchpad sensitivity (Type 20BS)

    Hello people, This is my first Lenovo PC (have always been a Mac user since I learned how to manage PCs) and I'm getting used to the windows user interface. The user experience improves day after day. If there is something that I simply can't so far,

  • lost cd key

    I installed a new hard drive and load windows xp pro. I have older microsoft software that I want to load but I have lost the cd key. Is it possible to retreve the software cd key?