Satellite P750-114 - disk space to the critical level

Hello

I recently bought by Satellite P750-114 and now I get a message from toshiba Tempro my partition is cricial level as it reached 90% or more.

Could someone help me with this please? Why did I get this? something wrong?

To be honest I n don't know what the problem with Tempro, but this tool is somewhat strange. Nothing is false, then there is no reason to panic.

Believe me best you can do is to remove it. In General, it is a nice and useful tool, but you don't need to all n.

Remove it from the system and be happy.

Tags: Toshiba

Similar Questions

  • Re: Satellite P750-114 - WLAN need driver

    Hello

    I really need help to find the driver on the right wireless for my Satellite P750-114-PSAY3E-02D002EN. I went through the trouble to install Windows 7 without using the recovery disk that you can get from the hidden HARD disk (I had 300 GB of files I didn t want to lose) and I got a nightmare to find the drivers for this laptop. (you mind I was warned by friends that Toshiba can be a real pain, but it's actually an understatement).

    Now (after a few days?) I m at the point where most things work outside my wireless.

    I ve found an old diagnosis tool PC Toshiba which is a bit difficult, but he said it s a realtek driver that I need, but I can t say that and that support Toshiba installs, I downloaded and then nothing happens. All suggestions are welcome!

    Thaaanks!

    According to specification for laptop, your laptop has Atheros WLAN with integrated BT card
    For WLAN driver check Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp or WLAN Portal directly - http://aps2.toshiba-tro.de/wlan/. I think that here you can find the Win7 drivers.

  • Satellite P750-114 - extension of battery?

    Hello

    I was wondering if there is an extended battery available for Satellite P750-114. I can't find one on the Toshiba site. Are there any other sources I was able to find one?
    Thank you

    Hello

    I checked the specifications of other models P750 and their options but for P750 everything at the moment, only a battery 6 cells is available. There is therefore no battery 9 cells with a higher capacity.

    Maybe that Toshiba will develop such a new battery more wait to let s ability what will happen with. But on the other side, I must say that the Satellite P750 is a great piece of hardware, with very fast components for multimedia, games, etc. It s not the best laptop of Toshiba for mobile use of the battery life is not so important for this model in my opinion.

  • WEb camera initializtion failed in Satellite P750-114

    Dear all,

    I am facing a problem with the webcam in my Toshiba Satellite P750-114. The laptop is less than two months the webcam was working fine, then all of a sudden it stopped working. The error message is "Web camera initialization failed. Please check your device and restart the application or computer. The Microphone works well, since it is linked to the web camera device. The operating system is Windows 7 64 bit. It seems that the operating system does not see that there is a webcam more. I tried the following things:

    1. I uninstalled the web camera driver, downloaded the latest driver from Toshiba Web site (the link is http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK) and installed, but it did not work.
    2 - I have restored the original for the laptop settings, but still the webcam does not work.

    Two ways that I use to test the web camera: the Skype and Start/Toshiba/Utilities ' Web Camera Application"

    Please if anyone has an idea on how to solve this problem, the laptop is band again and it is fantastic, but this problem is annoying. I searched the Internet for similar problems, some Toshiba models suffer from this problem but not P750-114.

    Help, please

    Bashar

    > I have restored the original for the laptop settings, but still the webcam does not work.
    This means that you have installed the OS using HARD drive recovery facility (factory settings)?

  • Why do I get an error messege saying that you run lack of disk space on the HP-TOOLS (E :) when there is nothing there?

    Why do I get an error messege saying that you run lack of disk space on the HP-TOOLS (E :) when there is nothing there?   Have cleaned the disc and it shows 0 items

    Original title: HP-TOOLS

    The HP tools partition reports nothing because the files are hidden.

    If you have something to E, out soon. After moving, the "running out of disk space" message stops...

  • What I do when I get this message: there is not enough space left to the location of the cache... Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change

    I don't know what that means:

    "There is not enough disk space to left to the location of the cache...  Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change the location of the cache in the Cache preferences.  Then restart Bridge. »

    I deleted a whole bunch of photoshoots I had on my desktop, but how to make more space here?

    Erica

    Hi Ericacole

    What version of the bridge are you using and what is your OS?

    Please how much is left in your main hard drive.

    By default, the bridge cache is located at: -.

    C:\Users\Yourname\AppData\Roaming\Adobe\Bridge CC\Cache (AppData is a hidden folder)

    Note that cache bridge could be very large depending on your use of the product.

    Please see Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS

    Concerning

    Assani

  • Running out of disk space and the need to remove the old clichés

    I recently joined a company owning an ESXi 4.1.0 (build 260247) server with 4 500GB data warehouses.  One of our servers main database (Ubuntu/Postgres), which uses only one of the data warehouses (4 datastore) has 21GB 465 GB free.  It is currently configured to store all settings, storage and snapshots on this unique data store.  The hard disk is configured as thin.

    The virtual machine has crashed a few days ago, when it ran out of disk space.  We removed a small second partition (which was in the same data store) and cleared space, but we receive extremely weak with only 5% of the data left store.

    I have read many posts and wanted to get the opinion of this community before I move forward.   Because we do not use the 4.1 last I heard some issues using the option "Remove all" that it may require more disk space and others recommended to manually delete snapshots from the closest to the base, but it seems that in this case it can merge the snapshot with the original without freeing all the space.

    We are not all of the snapshots and I'm fine with delete them, but I assure you we will not run out of disk space in the process and complicate things further.

    It is best to manually remove these snapshots starting with the one closest to the base or by using the "Delete All" (or something else)?  In addition, if we go with the manual option, is it possible with the virtual machine upward or do we need to close first?

    Current snapshots:

    snapshot1.jpg

    Current data warehouses associated with VM (really unique using the 4 data store)

    snapshot2.jpg

    Actual files on the data store 4

    snapshot3.jpg

    Thank you

    Brandon

    Welcome to the community,

    After the screenshot, your virtual disk 'arrow_db1.vmdk' stocked thickness!

    With the thick disc service and ESXi 4.1 (the problem with "Delete All" is related to version 4.0), you can run safely "Delete All". However, due to low disk space, I recommend that do you with the virtual machine off. If turned on, a new temporary snapshot will be created, which - according to the workload of the virtual machine - can grow and fill in the data store.

    Due to the size of snapshot and depending on the speed of your storage space, you need to plan a few hours well downtime.

    André

  • msg.hbacommon.outOfSpace:There is reached for disk virtual server_1 - 000008.vmdk.  You may be able to continue this session by freeing up disk space on the partition relevant, clicking Retry

    Hello


    I've seen various threads on this topic but have not found a resolution or explanation that fits my specific scenario.


    I have an ESXi 4 server connected to a San (700 GB) with 1 virtual machine on that (Exchange 2010).   The virtual machine, I created has 4 discs, 50GB for the OS, 2 240 GB for database drives and 1 100 GB drive for newspapers.  In the operating system, each partition shows that I have a lot of space.  Last night, I'm moving on our Exchange 2003 Server mailboxes when all of a sudden I get this error message and stop the server:

    msg.hbacommon.outOfSpace:There is reached for disk virtual server_1 - 000008.vmdk.  You may be able to continue this session by freeing up disk space on the relevant partition, and then click Retry.  Otherwise, click Cancel to end this session.  Try again / Stop

    Retry reproduced the error... Stop stop the virtual machine.

    After I stop, I look in the client vsphere under hardware > storage > SAN where the disc is, and I find that I'm out of space.

    Now, I created multiple snapshots I could fall back on since when I was doing the initial setup of the Exchange.  I deleted a large number of people and got up to about 50 GB of free space showing on the SAN.  However, this number is declining slowly.

    Now, when I created the virtual machine, I configured the ramdisks to be of a certain size already (50 GB, 240 GB, etc.).  How is it that adding data (moving the mailbox) using more space than what is already assigned to the virtual disks?  This will become a huge problem that I have several other mailboxes to move and I thought that I had already allocated to the space I need.

    Why is that when the server is just sitting there.  Available free space decreases?  It has something to do with the type of disc that I created? (Thickness)

    Could someone please explain why this is happening and, more important still, how can I stop it without having to do anything too drastic?

    Hello.

    "I have an ESXi 4 server connected to a San (700 GB) with 1 virtual machine on that (Exchange 2010).   The virtual machine, I created has 4 discs, 50GB for the OS, 2 240 GB for database drives and 1 100 GB drive for newspapers.  In the operating system, each partition shows that I have a lot of space. »

    You have created 630 GB of thick disks on a 700 GB of data store.  Thick disks use this allocated space, no matter what operating system did with them in terms of use. Yes GB 630 thickness = 630 GB used space on the data store.

    "Last night, I'm moving on the mailboxes of our Exchange 2003 server, when all of a sudden I get this error message and stop the server:
    msg.hbacommon.outOfSpace:There is reached for disk virtual server_1 - 000008.vmdk.  You may be able to continue this session by freeing up disk space on the relevant partition, and then click Retry.  Otherwise, click Cancel to end this session.  Try again / Stop
    After I stop, I look in the client vsphere under hardware > storage > SAN where the disc is, and I find that I'm out of space. »

    You still snapshots (as you also mentioned) on this virtual machine as well.  With only 70 GB of free space on the data store, the snapshots are defintely going to be able to fill the volume in short order.

    «Now, when I created the virtual machine, I configured the ramdisks to be of a certain size already (50 GB, 240 GB, etc.).»  How is it that adding data (moving the mailbox) using more space than what is already assigned to the virtual disks? »

    When you create the snapshot, a new drive is created that will get all new disk writes.  So to copy a large number of mailboxes will use a lot of space quickly.

    "Why is that when the server is just sitting there."  Available free space decreases?  It has something to do with the type of disc that I created? (Thick) »

    Thick is using space, and convert it into thin disks may help to varying degrees - depending on the amount of writes.  It is above all the snapshots of the origin of the problem, or at least it's where you can focus your attention to solve this.

    "Could someone please explain why this is happening and, more important still, how can I stop it without having to do anything too drastic?"

    Remove snapshots and/or move this virtual machine to a data store greater would be the simpler of two corrections.

    Good luck!

  • My computer is no longer warn me entry stop when the battery reaches the critical level.

    My computer is no longer warn me entry stop when the battery reaches the critical level. Officially, it shows a warning sign and told me to shot or recharge the battery when it gets to level criticism, but now he can't, but stop just when the battery has reached its critical level. No warning sign more.
    What should I do to get the warning before the pc turns off when the battery is at its critical level.
    My pc is hp laptop mini 110-3100. Start Windows 7.

    Hi Sage180,

    ·         Did you change in the computer before the show?

    Follow these methods.

    Method 1: Run the Troubleshooter of power.

    Method 2: Follow the steps in the article.

    Solutions to common battery problems

    Battery meter: frequently asked questions

    For reference: take care of your laptop battery

  • Satellite A215-S7422: free space on the HARD disk decreases every day

    Hello everyone,

    Hi I'm alex.

    I've owned a computer laptop "SATELLITE A215-S7422.
    I got 147 GB of my hard disk drive memory, I got 119 free space but as I noticed it is constantly down even if I do not download anything.

    When I saw this first I try to get it back to the factory setting and I had 128 GB of free space, and every day it is significantly down.

    Everything I do is look at you tube.

    Can someone explain to me what is happening and what I can do about it...

    It would be much appreciated.

    Thank you

    Hello

    There is a simple explanation why HARD disk space decreases each time while watching Youtube videos
    The video stream is always stored on the HARD drive in the internet files folder and in time.

    So from time to time, it would be desirable to remove these files and to clean the folder of files over time.
    I use the CCLeaner. It is free software and can be downloaded from different pages. Google simply
    This program is very useful. It cleans the HARD drive and removes the garbage all registry.

    You should test.

  • Question on the available disk space on the Satellite Z930

    I'm new on this Yes, you can not shoot me down if this is a stupid question. I just bought a new ultrabook Z930. Storage space announced was 125 GB (drive C is only show 100 GB available). Only, I installed MS Office Standard 2007, Norton anti virus and printer drivers.

    However, I now only 65GB of disk space, and I do not think that these applications take 35 GB. I removed the shadow at all.
    Can someone give me some advice please?

    Unfortunately we can not see info exact drive HARD, but maybe you saw something wrong.
    Check please Disk management in the computer management options and you can see all the information base on the HARD disk and each partition of HARD drive.

    I can imagine that this 35 GB is total data backed up on some partition that contains the operating system and all the stuff pre-installed.

  • Satellite P750 114 - how to start using the remote control

    Hello

    Does anyone know how to start to use the remote that came with my makeup P750 114.
    When I press on simple volume keys + / doesn't seem to work.
    I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

    Hello

    A remote control that is included with some models allows you to perofom certain functions.
    Using the remote control, you can
    -Navigate and control the media center window
    -Check the video or live tv display
    -Place the computer in and out of fashion "Eve".

    There is a button on the remote control.
    It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
    You will find options; do nothing, sleep, hibernate, shut down.

    Hope this helps

  • Satellite Pro L40 - disk space to level critical

    HI, for the first time the user and technically not much minded when it comes to computer systems...

    I am constantly getting an alert Toshiba Tempro message indicating "data stored on one of your hard disk partitions now reaches 90% or more of its capacity" and a 74,52 GB total disk space, I don't have that 7,44 GB of free disk space - all I really on my system are Photos and ITunes - can they really occupy all this space? - And what I can do to get more disk space? -Any help will be appreciated.

    > Everything I really on my system are Photos and ITunes - can they really handle all that space?
    No one can answer your question on this virtual path. How should we know how much data is stored on your partitions?
    How to get more disk space?
    Remove data that you don't need, or move it to another partition.
    You can also move all your data to an external device like external HARD disk.

  • Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

    I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

    Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

    Australia
    TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

    Cannot install the latest drivers below (everything worked when bought the laptop):

    -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
    -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

    * DVB - T Tuner Driver *.
    The EXE file extracted in the temp folder and goes no further.
    The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

    * Bluetooth Driver *.
    First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

    Then install attempt fails to go too far (is unable to install the driver at all).

    Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

    I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

    Refer to pictures:

    DEVICE MANAGER
    http://I52.Tinypic.com/35cr38i.jpg

    1ST COURSE SETUP
    http://I52.Tinypic.com/2r6jfv9.jpg

    2ND INSTALL PROGRESS
    http://i55.Tinypic.com/jgphfc.jpg

    see you soon

    Dennis

    > The EXE file extracted in the temp folder and goes no further.
    > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

    Try to extract the exe from another place, not in the temp folder.
    In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
    Choose the installation procedure advantage and point to the folder that contains the extracted files.

    With regard to the issue of the BT;
    Download the new battery of BT from here:
    http://APS2.toshiba-tro.de/Bluetooth/

    Then clean the registry using the CCleaner.
    This tool is freeware and can be downloaded on several different pages.
    So after cleaning check if you could install new BT of the register stack.

  • Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

    Hello

    I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

    I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

    I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

    And the help is very appreciated.

    Thanks and regards,
    Dinesh

    Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

    A sort of migration of files from one to the other HARD disk is not solution.

    Only for laptop with factory will work and the usable recovery partition.

Maybe you are looking for

  • Tools lost Options; How can I get that back?

    Tools lost 'Options '. How do I get it back?

  • Tecra S: I can change the IRQ settings?

    Hello Recently, I received a new external (E - MU 1616 m) card using a PCMCIA card to connect to the computer. It does not work as it should because of the fact that the shared PCMCIA cardbus controller's IRQ with a range of other things (controllers

  • high definition audio driver package KB888111

    I have a fujitsu siemens laptop and it says there is a problem with your audio hardware, I downloaded advanced uninstaller pro and in the list of programs, it says it's missing, high definition audio driver package KB888111

  • RV320 VPN cannot access peripheral LAN using iPad

    With the help of RV320, firmware 1.1.1.06 LAN 192.168.1.x 255.255.255.0 VPN 192.168.09.100 to 192.168.09.150 I need to access a device on the local network using this VPN connection from iPad. The Unit received address DHCP on LAN, broadcasts its pre

  • Create data source

    Dear,How can I create a new data source (JNDI) for DB external.I want to be able to query the DB using JDBC, but I want the data to be managed by nenucleus source.