Satellite Pro L40 - disk space to level critical

Similar Questions

• Satellite L750 - disk space to level critical

  Hello

  1st post please be nice and not too techie!
  I just bought a new Satellite L750 computer laptop and loaded onto my iTunes file and some photos. The specification on the laptop says hard drive 500 GB, but I'm getting meesages warning saying
  Disk space to level critical

  Toshiba TEMPRO issued an alert that your stored data has now reached 90% or more of its capacity.
  The data says that Windows (c) disc 37.1 GB free of 232 GB which is 90% I guess. But the data (D) 218 GB free of 233 GB

  What happens when I use all the space on drive C? It flows more on D drive?

  What I have to do something, if so what? Simple tech not talk please!

  Thank you

  Dennis

  Have you tried to spend 20 or more GB of data on the D partition to see if the message will be gone?

  Anyway, in my opinion there is no reason to panic. TEMPRO is nice tool but sometimes can be confusing too.
  Maybe it sounds stupid now, but you can remove the system or simply stop in autostart so it does not start with windows more.

• Toshiba TEMRPO alert: disk space to level critical

  I have a lot of space on my Satellite U400:

  Vista (c :)) 70.7 GB free on 177 Go
  Data (e :)) free off GB 113 108 GB

  However the Toshiba TEMPRO alerts with space drive at the level critical guard appearing all the time!

  "Toshiba TEMPRO issued an alert that your stored data has now reached 90% or more of its capacity."
  "Total disk space: go 298,02 and free disk space: 19.69 GB.

  TEMPRO version improved to 2.0.

  I do not understand what is wrong! Please advice.

  Post edited by: amusaeva

  Hello

  There is a partition of 3rd extra that is not visible!
  The 3rd partition is automatically created y Vista and it contains the Vista backup files that can be used as a last resort!
  If something goes wrong with the operating system, and then Vista can be restored and repaired using the files on that partition.

  I think that means Tempro this partition.

• Satellite P750-114 - disk space to the critical level

  Hello

  I recently bought by Satellite P750-114 and now I get a message from toshiba Tempro my partition is cricial level as it reached 90% or more.

  Could someone help me with this please? Why did I get this? something wrong?

  To be honest I n don't know what the problem with Tempro, but this tool is somewhat strange. Nothing is false, then there is no reason to panic.

  Believe me best you can do is to remove it. In General, it is a nice and useful tool, but you don't need to all n.

  Remove it from the system and be happy.

• How to get factory reset disks for Satellite Pro L40?

  Hi all

  Ive got someone other Toshiba Satellite Pro L40 attempt to fix, it got a virus, and the best way to solve this problem is to do a factory reset, so I copied all the personal files on DVD and went to do a factory reset, but told me that I need the discs...

  But apparently, this laptop was given as a replacement by an insurance company, and no records were provided, then how to to get the disks?

  Thank you
  Angus

  Hello

  Not sure if you will be able to order this disc from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Sometimes these disks cannot be ordered if the notebook series would be dropped.
  In any case, check out the page and try

  It may be possible to order this disc

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• Satellite Pro L40 - Vista display lack of virtual memory message

  Hello

  new here on this forum, hope someone can help,

  I have a series of satellite Pro L40, I'm trying to free up memory space I get the prompt "virtual memory is low", Vista (c) shows 3.28 GB free of 37.2 GB & data (E :) shows 100% free, I just replced both modules of memory with x 2 1 GB 200 pin Sodimm memory upgrades but Vista is still to display only 3.28 GB of free space) , any idea?

  Your very confused!, Mike.

  Hi Mike,.

  I think you mixed a lot of The RAM (Random Access Memory) has * nothing * to do with disk space von Vista (c).
  Vista with low disk space partition is stored on the HARD disk and the second partition (E :) as well.
  RAM and HARD drive are completely different. All your data/files are stored on the HARD drive because the RAM is no place to save the data.

  In any case, I think you need to move some files from partition C: to E: partition like photos, music, etc. Then, you can get rid of this error message.

  I think that this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB7101OB0006R01.htm

• Question about the files to be transferred on the Satellite Pro L40

  I have a portable Satellite Pro L40 and bought a upgrade disk to upgrade Vista Home Basic to Vista Home Premium.
  But I can not install the upgrade because drive C is showing that only have 8 GB of space.
  Drive E has 30G of space, but I can't transfer files from C to E to free up enough space.

  Please can someone tell me how to transfer files from C to E?

  I can ask the same thing as Akuma - why can you transfer files from C to E of t?

  Open two windows in the Windows Explorer. On the left side of the C drive on the right side of drive E.
  Mark all the files on the left side and move them to the right window. When you do with the key right mouse options will be displayed. Choose the MOVE option and I hope that the adaptation procedure will be launched.

  Have you ever tried to do this?
  An error message appears on the screen?

  Question sorry but described is completely illogical.

• Satellite Pro L40-15 a - Sound Driver default after installing Windows XP

  Satellite Pro L40-15 has

  Just installed XP Professional 32, merged with drivers installation disk. Everything works bar the sound. When you run the Realtek driver, downloaded from the Toshiba site, runs almost to the end gives error install Realtek HD Audio Driver failure!

  Clues?

  Hi sail_free,

  Please use the forum search before starting a question. You can find a great number of discussions such as this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58026

  He therefore remove the audio driver, install Service Pack 3, and then reinstall the audio driver.

  Check this box!

• Satellite Pro L40-15 a (PSL4BE) BIOS update procedure

  Hi, since trying to update the BIOS from Windows using the package provided on the official page to download always translated by the + black screen problem + described [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=47887&tstart=0], which is the * correct * on how to update the BIOS on this laptop?

  I am no newbie: with these laptops, this is the first and only 2 has no BIOS updates, more than 100 + modernization successful in my career!

  Here, I sketch the history with the my two Satellite Pro L40 - 15A (PSL4BE).

  Cell phone 1:
  a. BIOS 1.60
  b. upgrading to Windows * XP * to 5.50 _For Windows XP_
  c. programme stop the PC from the start, with a progress remains empty bar!
  d. first boot in the BIOS showing version 5.50 (!), but then: dead (black screen)
  e. taken for an ASP.
  f. after 15 minutes and for as little as 35 it has been resolved, and BIOS updated to 2.00
  g. explanation of the ASP guy was it was my fault, because since the laptop is with Vista installed, I couldn't do a upgrade the BIOS of XP!
  h. sold the laptop with BIOS 2.00

  Laptop 2:
  a. BIOS 1.60
  b. upgrade of Windows * Vista * to 2,00 _For Windows Vista_
  c. programme stop the PC from the start, with a progress remains empty bar!
  d. but the laptop still and always boots with BIOS 1.60.
  e. upgrade to Windows * XP * at 5.50 _For Windows XP_ (I know, I was really looking for troubles, uh?)
  f. first boot in the BIOS showing version 5.50 (!), but then: dead (black screen) (as 1 laptop)
  g. tried every combination of secret keys, CD, USB, floppy drive, but nothing could do the trick to force a BIOS loading, as the ASP was indeed able to do with my laptop 1!
  h. read 'notuagain' contribution to the forum thread [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=47887&tstart=0], and it worked.
  i. but now, the laptop still has BIOS 1.60

  Any ideas out there?
  Thank you

  Hello

  Here you can find the traditional versions of updated BIOS for this laptop model:
  http://rapidshare.com/files/415039398/BIOS-2.0-psl4be-Vista.zip.html
  http://rapidshare.com/files/415039409/BIOS-5.5-psl4be-XP.zip.html

  So you can update the BIOS using a USB bootable or external USB FDD drive.

  > AFUDOS (of an old DOS 6.22 boot disk, with new AFUDOS.) EXE from the site) does not either, he said: he can't erase the flash00000...
  http://www.Softpedia.com/get/system/hard-disk-utils/HP-USB-disk-storage-format-tool.shtml

• Satellite Pro L40 - cannot install Windows XP

  Material: Satellite Pro L40, HDD 80 GB, 1.5 GB of RAM

  Software: Windows XP + SP2 install CD, floppy disk with AHCI HDD ICH8M_32bit drivers drivers created according to the instructions in "how to install Windows XP on a L40.pd"f of Toshiba (which is pretty outdated by the way!)

  Problem: The start is fine, after pressing F6 quick to add drivers is very good, set up windows starts.
  Then I get this message on the screen: insert the disc labeled "Intel Matrix Storage Manager" in the A: drive. Press ENTER when you are ready.
  This is not mentioned in the installation instructions.

  Well, I don't have a disc labeled like that. I only have the disk that I created according to the instructions in the PDF above.
  It is already in the drive, so I press ENTER and nothing happens.

  My only other option is to quit smoking. Tried to quit smoking and going through the whole process several times - always eventually return to this impasse.

  (sigh)

  Can anyone help? Please?

  I think that you have made a mistake, because I never have problems to use the SATA drivers.
  Have you tried to do the floppy drive with the drivers and where did you download the drivers? Maybe you should try to download again on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  And have you tried to create your own with the drivers installation disk? You can do this with nLite for example. I prefer this because that is why I n t need an external floppy drive.
  It s worth a try! ;)
  [www.nliteos.com]

• Satellite Pro L40 - after I start the update of the BIOS, nothing happens

  I'm trying to update my BIOS version 2.00 - WIN for Satellite Pro L40 PSL4BE.
  My OS is Vista 64 bit.

  I downloaded the file and run the .exe but nothing happens.

  I also tried to copy the files on a diskette and start with a floppy disk, however, I get an error message saying to remove the diskette in the drive on startup. Any help please?

  First update the BIOS for Satellite Pro L40 is based on Windows it of possible to update in DOS mode.

  Also, I checked the Web from Toshiba site and I can only find a BIOS for Windows XP and Windows Vista 32-bit.
  It seems that the update of the BIOS is not supported for Vista 64-bit.

  If you want to update, you need to change to 32 bit Vista or XP. Then you can update the BIOS.
  Don t forget this version 2.00 - WIN is for Vista 32 bit and 5.50 - WIN XP.

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• SATELLITE PRO L40 - 18 M: RAM question

  Hello
  I have the Version TOSHIBA Satellite Pro L40 PSL4BE-00V00XIT, it has 2 RAM slot: one within 1 GB of ram and I put another 1 GB ram more. Now I would like to change the ram, it took years for a 2 GB of RAM, for a total of 3 GB of RAM. is this possible with my laptop or the housing has a GB maximum ram?
  Thank you!!!

  Can't anyone help me?

• I need modem for Satellite Pro L40

  Hello

  I need modem.
  computer toshiba laptop satellite pro L40 windows xp

  Hi mate

  To be honest I don t understand your problem.
  Do you need a modem or you need a modem driver?

  The Sat Pro L40 was equipped with the internal modem and the modem driver can be found on the European driver Toshiba page.

  Welcome them