Satellite P750 PSAY3E: Win 8 Eco Utility will not install

Similar Questions

• I bought Creative cloud individual training MAC & WIN 12MTH membership but will not install it until next year it will still be valid then?

  I bought Creative cloud individual training MAC & WIN 12MTH membership but will not install it until next year it will still be valid then?

  Hello

  Please visit the following link:

  Using creative cloud | Creative cloud / Common Questions

  This should help answer your request, let us know if this helps.

  Kind regards

  Bani

• Airport utility will not install

  When I try to install AirPort Utility on my iMac running OS X El Capitan 10.11.6

  I get the following message;

  AirPort utility cannot be installed to this disk.

  The version of Mac OS X on this volume is not supported.

  could you please help.

  concerning

  Stephen

  OS X El Capitan is already bundled with AirPort Utility v6.x. It seems that you try to install the older v5.x for the utility. Unfortunately, this older version will not install on later versions of OS X.

  If you require administer an older 802.11 g AirPort access point you will need a Mac running OS X Lion or earlier or a Windows XP or 7 PC.

• Satellite A505-S6973 - mute and eco utility buttons not respons

  Hello again everyone,

  I apologize for this but I have a question about my account record.

  I posted a question earlier where whenever I press the mute buttons and eco utility I get no answer (just a beep the button mute).

  I pressed the fn man icon and button support and I see it says I must register the button but I have no idea where I have to browse to find the application to fix to save it.

  I hope someone can help me, I searched through the forums and the last time I posted the question to the answer that I had did not work.

  If anyone can help with this question I would appreciate it very much.

  Hello

  If you want to use the ECO button, you must also install the ECO utility.
  In General, the multimedia keys on Toshiba are controlled by VAP (value added package).

  In your case, I recommend you to reinstall this VAP.

  > I pressed the fn man icon and button support and I see it says I must register the button but I have no idea where I have to browse to find the application to fix to save it.

  Usually, you have to choose the application (exe file) that you want to use under this button

• Satellite Z830-10J - ECO Utility does not install

  Hello

  I have 12 Ultrabooks Satalite Z830-10J all installed in the same way.
  I have a Ultrabook where I can not install the Utillity ECO

  I get a warning with a yellow triangle and nothing more...
  Tried different versions, but none works.

  How can I solve this problem?

  Kind regards

  Boudewijn

  > I got a warning with a yellow triangle and nothing more.
  and this error message exactly?

  Have you installed the VAP (value added package), which is important to run other tools of Toshiba?

• Drive HARD Satellite A205 S5803 failure possible. It will not install Windows.

  Well. It's months now since my broken laptop. A few DAYS after my warranty missed. No one has been able to help me and this problem happens so many I can't even count. This model of laptop is not a good idea to buy. It all started with Windows not start. He would charge the Toshiba/Phoenix logo, then Windows bar loads, then nothing.

  Just a black screen. I could recover my files getting Puppy Linux and transfer my files from my hard drive to my external 500 GB hard drive that I decided to buy last night because I have a feeling that this will keep going if I continue to buy Toshiba. Nothing was wrong with my files, but I have a strong feeling my hard drive or some sort of material important died.

  So I try first to do a startup repair, because it should work humble? Well, he sat for 24 hours and did not a thing.
  So I thought OK fine I'll just reinstall the OS, I already had my backup files. I put the disc, go to Toshiba Recovery Wizard, say to delete all start again and reinstall my OS, and he tells me "failed to create Partition. Error 08 - 0 74-0000. »

  That's when I KNOW its something wrong with the hardware. I have nothing to do that.

  I didn't delete a file and it tells me this. Anyone has any ideas until I throw this thing away?

  The message indicates that the partition could not be created on the HARD drive.
  I put t know why but I remember that I had similar problem with my other cell phone from another manufacturer.

  I couldn't run the recovery by using the supplied floppy.
  Finally, I formatted my HARD drive using the Microsoft Windows XP disk and deleted all partitions from the HARD disk also.
  I then used the recovery again disc and the installation went well.

  Maybe you could try that too.
  Try to format the HARD drive using a disc like Win XP.

  Maybe the latter won't work

• Satellite A505-56960 - Eco Utility lights not on Windows 7

  I have a Toshiba Satellite A505-56960 and I have recently updated in Windows Vista Home Premium to Windows 7 Professional.

  In doing so, I had to install a custom (clean) and since I did it I can't get the Eco Utilitly came with the laptop to work. I tried installing the Toshiba value added Package, but have had no luck yet. When I hit the button it beeps but that is it. The Eco Utility is not even appear as installed.

  Any help would be greatly appreciated.

  Hello!

  I didn't install Windows 7 on my Satellite A500 again but I've done a clean install of too. The only difference is that it is Vista not Windows 7.

  I mean, it's the same as Akuma. You will find on the site of Toshiba Eco Utility. I even checked the Toshiba page we and I can't find the Eco utility. It s is only available for Vista at the moment but you should try it because most of the drivers are also works on Windows 7. It s worth a try!

  For me after installation of the Eco utility button worked properly! :)

• Satellite P750 PSAY3A: Intel GPU switches do not to NVidia GT540M

  I have a Satellite P750 PSAY3A 0MQ001.
  I can't make Gpu Intel HD 3000 to the Gpu Nvidia Gt540M via the NVidia Control Panel (switching Optimus is not do properly either).

  I choose the settings to use the Nvidia card high performance for some programs, but do not use them, it goes the same for games. The strange thing is, if I install the latest Nvidia 301,42 drivers via a facility clean, said programs will use the NVidia card, if I restart the laptop, they use the card NVidia still once, until I re - install the NVidia drivers again.

  I tried to install the latest drivers Intel HD 3000, but the system said their inconsistent and I must use the Intel from Toshiba driver (I am sure I have the latest downloaded correct drivers).

  I did a factory restore today that having the same problem, the Nvidia card is not used even if it is enabled by default, until I have go through reinstalling driver routine.

  I am at a loss to know what to do. I talked to Toshiba support on the phone I have the warranty, but I want to make sure it's a "hardware problem" not "Software", before sending it to the sea.

  I saw a message somewhere in my "trip of suffocation of the parameters" that says something along the lines of my Intel GPU must be plugged into a housing PCI Express x 16 for maximum performance, I know that the NVidia card is via looking through the Information when setting up Bus system, it's PCI Express x 16 Gen2 Perhaps the two Gpu need to be plugged into the PCI Express connector to move seamlessly between the two (I couldn't find the Info Bus for the Gpu from Intel), if so, this maybe the fault of hardware. I haven't looked, I don't want to void my warranty, but if that were the case, I would be willing to send it to get it looked at by Toshiba.

  Can someone please give me some advice on forcing Intel to switch to Nvidia, as it is supposed to without having to constantly re - install drivers NVidia Lol...

  This youtube video may help you:
  http://www.YouTube.com/watch?v=WVBEPhE_Osg

  > I tried to install the latest drivers Intel HD 3000 but the system said their inconsistent and I must use the Intel from Toshiba driver (I am sure I have the latest downloaded correct drivers).

  Usually, you should be able to install the latest driver from Intel HD graphics card, but you must do so via Device Manager. You must choose the graphics card Intel and point to the folder of the Intel driver that you have downloaded from the Intel page manually.

• Satellite Pro M50: Lobos SkyMe internet phone will not be installed when connect you

  I would welcome suggestions for a USB problem.

  A Lobos SkyMe internet phone will not install when it is connected to a USB port, but will install when plugged into my Shuttle PC.
  Historical precedents with the USB ports on this Satellite Pro M50, I'm pretty much at my wits end.

  Apparently, no driver is necessary, but I wonder if there is a registry hack to force recognition?

  Hello

  Could you describe in detail what does not work? You get an error message?

  I m not an expert in internet phone installation and didn t install similar devices in the past, but I imagine that the phone should recognize the new plugged the USB with no problems.

  If there is a problem with the USB device recognition go to Device Manager and remove all the controllers and the USB ports.
  Reboot the laptop.

  After that process, the operating system installs the ports again.
  Then you could try to connect the external USB device to the laptop USB port.

  PS; to make sure that the USB ports will provide enough power, you must disable USB energy saving properties.

• Software CyberLink will not install on Win 8

  H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

  Hello

  Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

  Any suggestions on why Cyberlink programs will not install?

  Thank you

  Hello

  Check the compatibility of your products from Cyberlink here.

  The HP position maintenance for Cyberlink is only an update.

  If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

  BTW, nice PC.

• KB2160841 will not install win 7 .error code 66A

  "Original title:" kb2160841 will not install win 7

  I tried the installation manual ' can low but the installation gives me a message that says doe. s does not apply to this os or blocked I get error cde 66A, I'm under win 7 cannot install auto or manual

  Help! tomt2006

  See the section "How to get help" of http://support.microsoft.com/kb/2160841

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7

  My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.

  Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe

  * When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).

  * Try with disabled firewall doesn't change anything.

  * If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.

  Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)

  It sounds crazy!  Any suggestions on how to fix would be greatly appreciated.

  Hello

  Run the Setup program and comlpete extrction process.

  Once the installation dialog box appears to put an end to this window.

  In Windows Explorer, press and type % temp % fall.

  Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)

  Open the installation folder.

  Rename the file named usbready.exe in usbready1.exe

  Back a levell and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Please let me know the results,

  Shlomi

• Win 7 will not install my old version of still

  I have a new computer with Windows 7 as operating system. On my old Win Xp computer, I used Encore 1.7 and it worked fine. Now my new system will not install my old version yet. What are my options? I still like I'm used to it.

  Thank you

  Phil Taylor in Montana

  It would probably never work. Architecture of Windows Media has fundamentally changed and the CoDecs does not, even if you somehow have it installed, which probably won't be possible. And unfortunately still is not sold separately more, so you should have a shape any new suite or Premiere Pro where it is included. In those circumstances, the best cost effective way would get the creative cloud.

  Mylenium

• Installation of HP will not install on Windows 7

  HP 3210 all-in-one will not install on win 7 all your solutions have me chasing my tail for about 2 days... Please help

  Mike Garrotto

  It is a forum for users of peer-to-peer supported. HP maintains no official presence in this forum.

  When you request support, please provide the HP model name and/or product full number of the material in question. In addition, please provide brand and full model name or number of the computer used. Also indicate what you're trying to do and how the equipment is connected between them.

  Please send Bravo

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety