Satellite P755 - 10 c - two problems after installing Win7 Ultimate

Similar Questions

• FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)

  FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?

  Hi Jim,.

  Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?

  Kind regards

  DP - K

• Satellite A300 - 9 pm - no reaction after installing Win7 cooling fan

  After Installing Win 7 on this CPU fan stop turning at all.

  Thus, when usage intensive pc shuts off due to the weather.

  I've been try bios update didn't etc no efect.

  Any idea?

  Hello

  It's very strange.
  Have you tried to reinstall Windows 7 again?
  I recommend you to repeat the installation of the OS!

  After installing Windows 7, you must install all the driver Win 7 and tools such as value-added package that is essential for Win 7

  Last but not least go to BIOS (F2) and set it to default settings!
  Save the changes and exit the BIOS

• Satellite L300D-12U - two problems after installing Ubuntu Linux

  Hello

  I installed Ubuntu 8.10 on my brand-new u. Satellite L300D-12
  So far, everything works fine, but there are two things bother me.

  1. I have problem with suspends to RAM. It does not work. If I use the option to boot, the screen goes black but the laptop is still running (you can hear it).
  In addition, nothing happens when I press the power button to exit the sleep option.
  I completely close the laptop and restart to be back in Ubuntu.
  Maybe someone has some ideas how I can fix the problem?

  My/etc/default/acpi-support have these entries:

  # Comment the following line to disable the ACPI suspend to RAM
  ACPI_SLEEP = true

  # Comment the following line to disable the suspension on disc
  ACPI_HIBERNATE = true

  # Change the following of 'sleep' to use ACPI S1 sleep, rather than S3.
  # This will save less energy, but can run on machines more
  # ACPI_SLEEP_MODE = mem
  ACPI_SLEEP_MODE = standby

  2 battery life
  My current maximum battery life is 01:10 hours. On windows, it's 2 hours >. Maybe someone has some ideas of configuration to increase the time of battery under Ubuntu?

  Any help is appreciated.

  Thanks in advance.

  Kind regards
  Manual

  Hello manual

  I'm really skeptical about Linux here support. I heard that Toshiba will start with Linux support, but of course, it is not started yet.

  If nobody here can offer help I recommend you discuss this on some Linux forum. You have more chance of getting help here.

• Satellite 2210CDT: two problems after installing Win XP

  Hello! Maby it sounds funny but I found Toshiba Satellite 2210CDT inside my closet, installed Windows XP (oem supplied with the mouse, I bought some time ago) and it works!
  The only problems I have are:
  * When the system is in hibernation, it is impossible to 'wake up' (I remmember in Win98 in this laptop there is problem);
  * I don't really have the tools provided with Win98 came with the laptop (ie.battery status and so...)

  Appreciate the help, Mike

  PS sorry if I post in a bad place in the forum, but this is my first post (I hope you can understend...)

  Hello

  Satellite 2210CDT is an ancient and you should be lucky that Windows XP runs on you laptop.
  But this unit has been designed and delivered before the era Windows XP started.
  I checked the page of the Toshiba driver and there is no drivers for Windows XP. I found drivers only for W2k and Win98.
  Unfortunately, if you use the Win XP on your laptop you must do without drivers Toshiba, tools and utilities.

  I found a utility to do Hibernation for Win98 on the Toshiba site. I think that this is a utility that is important to use the hibernation mode. But as I said, it is available for Win98.

• Satellite click on Mini - some problems after installing Win 10

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Posted by bilou24an199
  

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Wow the GUY you described exactly the same problem as me...
  If anyone can help that would be great.

• Satellite Pro U400 - micro reception problem after installing xp sp3

  I had Vista, then I recently installed windows XP SP3 from scratch (not downgraded). I downloaded the latest drivers from Toshiba and install. Now, I have a problem with the microphone. Speakers audio playback is fine, but the built-in microphone reception level is very low and often unrecognizable. I use a voip program. In Vista, micro worked better.

  Now in Windows XP Home edition, I told myself that they cannot hear me or my voice is very weak and difficult to recognize. I also tried to sound recorder in windows. My voice is as if I am talking about ten meters.
  I have an external microphone, so I can't say if line microphone. works well.

  In messages previous people mention a fix for xp download his questions but I'm not sure if applies to my situation.

  Thank you

  Erdem

  Hello Erdem

  As I see you have CD/DVD for Windows XP SP3 home edition recovery facilities. Everything worked well with the original recovery image? I have way is there a reason why you installed the new driver?
  Were you informed of the new drivers (Tempro) somehow?

  You have installed the drivers who exactly?
  What Satellite Pro U400 you (U400-xxx)?

• Re: Satellite A300 - fan does not work after installing Win7

  Hello.

  I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
  Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?

  My Satellite canned extinguishing because of this, so I would really appreciate help :)

  Best regards / Ocke

  Post edited by: Ocke

  Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
  Maybe a stupid question now, but have you tried to use the 32 bit version?

  You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?

• Satellite A200 - Webcam no longer works after installing Win7 32 bit

  I have a Toshiba Satellite A200-237 and I formatted my hard drive and installed Windows 7 Ultimate 32 bit once.
  I also installed software Toshiba site (camsoft-20070810084209) of this 1.7 version camera assistant...
  I start the program, but when I want to start the cam I get an error with the message of start the cam. I don't really understand the problem and when I loop upward the CAM system is unknown?
  What can be the problem? I have different version of CASES if so where can finance this?

  On my Satellite A300 (supplied with Vista) I installed the latest version designed for Satellite A500 (Vista version) and it works perfectly.
  I don't know if you can use it on your Satellite A200 but you can try it.

  You can find HERE for your model of laptop Win7 CASE
  CASE I used you can find HERE

  Try it. If it does not let us know.

• Satellite A300 (PSAG8E) - hardware problems after I installed win7 ultimate

  Hello and good day,

  I installed win7 ultimate a few days ago, windows was able to recognize most of my material accepts my build of microphone and camera and another component, I'm not sure what it is (Windows Update automatically downloaded the driver of sound and graphics for me).

  My questions are - where you can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The site pilot in the support page Toshiba does not include drivers and software)

  Thank you very much
  King Ben Simon

  Hello

  I have the Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfectly.

  Initially, I must say that I do not know where you are looking for the drivers and tools of Toshiba and that all things because utilities are downloadable on support Toshiba & download page under http://eu.computers.toshiba-europe.com

  It is logical that MIC will not work if you have not installed the appropriate driver. Installing drivers only and not using Microsoft update. What you need are the real and tested and not some free drivers of the internet.

  Go to the Toshiba download page and install all the stuff following this order of installations:
  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installing the driver VGA for HP Pavilion 1212TX g4

  Hello. I just bought a new HP Pavilion 1212TX g4.

  I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

  The error occurring on the screen is something like this: Access Violation (0xc0000005).

  Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

  I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

  Please someone help me. I can't use my new laptop

  Thanks in advance

  Herry

  If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

• I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly fee

  I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error

  Hello

  This link may help: the application failed to start properly (0xc0000022).-Microsoft Community

  Kind regards

  Sheena