Satellite P870 - Toshiba value added package cannot be shown in my language

Similar Questions

• Download TOSHIBA Value added Package

  I just uninstall the TOSHIBA value added package from my laptop because I had problems of Visual support cards, but now I can't find the last version of the added value of Toshiba pack on the website www.isd.toshiba.com.au/support in order to download and reinstall. What I am doing wrong? MWG

  I don't know what you're doing wrong.
  What model of laptop do you have exactly?

  Maybe you're on the wrong support page.

• Toshiba value added package and Qosmio F45

  Hello

  After reading [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=103556] that there is a problem with the keyboard shortcuts no longer work after the upgrade to the 'Toshiba value added package' in * Qosmio F45 * models, let me ask you if someone have correctly installed the latest version of the software (1.1.7) and have no problem with the keys.

  I just installed SP1 on my system Vista Premius. Should I wait for problems with PPV?

  I'd appreciate your help.

  Alfredo

  Just a short comment: version 1.1.7 is designed and tested with Vista without SP1. If you use it with SP1, you may have some problems. To avoid this Toshiba has to offer the new version. This new version will run in the new images of recovery (Vista SP1). After that it will be offered on the Toshiba support page.

  Qosmio F45 is probably US laptop model and for all information visit Toshiba US page http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  By the way: check out this interesting article on restrictions with Vista SP1
  http://APS2.toshiba-tro.de/KB0/TSB84026M0000R01.htm

  Bye and good luck!

• Error ID NOTINSTALLVALZ Toshiba value added Package installation MESSAGE ERR message

  I got this error message when install the Toshiba value added Package: ID_ERR_NOTINSTALLVALZ_MESSAGE on my M105-S3011 with the Vista operating system. How can I eliminate it? Should I update my BIOS to v5.10? Because I run XP and Vista in my laptop, so I can't update BIOS to 5.10 because it only supports VISTA, not XP.

  Someone at - it ideas?

  Salvation Jones

  It seems that today is your lucky day ;)

  OK, this forum is a tiny knowledge base! I found this thread on the same question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256

  It could be useful! Please let me know if it works or not!

• Toshiba value added Package for Windows Vista Version 1.1.3 on Qosmio F45

  I installed the new * Toshiba value added Package for Windows Vista Version 1.1.3 * for my Qosmio F45-AV413 and function keys was arrested for work.

  If I don't go back to the previous system, there is no action that I can do to make the works of buttons again.

  I tested with Vista Home Premium which is installed with the product, tested with Vista Business from scratch, and none of them work as expected.

  Well, if someone could help me with this question I really thank you,

  Marcelo.

  Have you already tried to install an earlier version of the software function button on your system? I think the new version is buggy and if not already a newer version is released, you should have the old version until a new one comes out.

  Please check if the old version works, it shouldn´t be a big problem for the single download from the Toshiba driver download site.

  See you soon

• Satellite A200-1N8: value added package does not

  Hello

  I have Toshiba A200 1N8 and which tent to install value added package to my computer laptop everything seems ok, but nothing chnaged in the configuartion of windows, the keyboard shortcut and function keys do not work.
  I think that changes have not taken effect.
  I tried uninstalling and reinstalling, safe mode... nothing has worked

  How can I solve this problem?
  My laptop is a model 6 buttons

  You must first remove the old version of VAP.
  Then you must download the new VAP for the A200 series right.
  As you know different A200 series exists and you must choose one that fits.

  In addition, you can choose the version of Toshiba controls for 6 control button.

  Best regards

• The satellite Pro A200 value-added package upgrade

  Alert of this Toshiba Tempo that an upgrade is available for the VAP.
  Download this update gives three packages that are options for "nobutton", '2button' or '6' - what exactly are these references to?
  Has anyone tried this update indicating the earlier version of the VAP should be uninstalled before installing a new one, is there a way to return in case of failure?

  I installed the latest version of VAP on my Satellite A200 to 6 buttons. I think it's pretty clear which version, you need to install on your laptop (depends on how many buttons are placed next to the switch).

  On each model of Toshiba laptop installs document s user manual where you can find all the info on your laptop. If an update is available Toshiba also offer document txt with a short explanation or overview. Of course, if necessary.

  How to install something of what will happen in the future. On the day of purchase, no one can know what updates will be available in a few months.

• Satellite L40 - error message during the installation of value-added package

  Hello

  yesterday I installed Windows 7 Professional 32 bit on my Toshiba Satellite L40 PSL40E, everything works fine except the volume on FN + arrow keys/esc control.

  I tried to install all of the packages available to fix the problem, but I can't install the VAP. Every time as I try, I get this error message: error installing PVAT [0x8146045B].
  I ran as administrator and also tried compatibility mode.

  Help please, thx!
  Constantin

  Hello

  Before that you can use the FN keys and other special functions that you need to install Toshiba Value added Package.
  My question is: have you downloaded the package of value added for Satellite L40 (PSL40E) and Windows 7 32 bit? It s is already available for the new Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed the drivers first? They must be installed first normally, e. g. chipset, screen, sound, LAN driver, etc.

• Value added package and touchpad driver for Linux

  I need to value pack and a Synaptics touchpad driver and it should work on Ubuntu Linux.

  Where can I find it?

  Hello!

  I put t know what phone you have but the Toshiba value added package is available for Windows. I checked the Web from Toshiba site but for Linux I can t find it.

  The driver for the touchpad, normally you can also find on the Toshiba site but it s is only available for Windows. Maybe you can find a driver on the site of the factory, for example, Synaptic.

  Good bye

• Cannot find v1.2.25 value added Package Windows 7 x 32 RUS

  Where can I find drivers for Windows7 x 32?
  Why should I spend two hours on the internet to find the 'value added Package v1.2.25 Windows 7 x 32 RUS?

  + The message was edited: assignment has been translated.

  I don't understand where is the problem.
  If you visit support Russia Russian page on http://www.toshiba.ru/innovation/download_drivers_bios.jsp?service=RU and I hope that you will find all the drivers for your machine here.

• Value added package install failed...

  Hi, I had a little problem.

  I've got GamerEdition of Vista 64 - bit OS. And a Toshiba - Satellite Pro U400 - 13G system specifications:

  Core 2 duo P8400 2.26 ghz processor
  4 GB OF RAM
  Intel HD 4500 graphics card
  Conexant HD Audio

  Now, when I try install Toshiba Value Package added, I get this error at the end of the installation:

  ID_ERR_NOTINSTALLTVALZ_MESSAGE

  ... and Setup fails.

  But the Setup has copied the files on my "C:\Program Files (x 86) \TOSHIBA" folder, IV ' e got:

  Bluetooth monitor
  FlashCards
  PCDiag
  Energy-saving
  SMARTLogService
  SmoothView
  TBS
  TOSHIBAValueAddedPackage
  TVALZ
  Utilities

  ... in my Toshiba folder, containing a total of 52, 4 MB. In the utility folder, I try to run "TACSPROP.exe" and says that "the registry is missing or may be broken.

  now... I know this problem most likely because I have a modded Vista version, but does anyone have an idea how I can do value-added package running on my system?

  I agree with you. You have changed the version of Vista. I imagine that this Department of software Toshiba create each tool and utility for Vista and of course to test it properly.
  No free version is not designed to work with the version you are using.

  VAP is not editable by anyone and there is nothing you can do. If you use an exotic OS version either it works or not. Sorry but there is nothing you can do with VAP.

• Toshiba value added logical and device for general use - what is it?

  Hello

  I completely put in place a new system on the Tecra S2, Win XP and everything. All the drivers from the site Web of Toshiba helped but now only a single 'questionmark' remains in the hardware Manager:

  Toshiba added value to general use and logical device

  I cannot find a driver anywhere or so for that. What is it indeed?
  The laptop works fine, no problem.

  Greetings,
  Ben

  I think it is (among other things) an ACPI driver...
  and you can download it-I remember...
  don't forget the 'value added package' and 'common modules' to install

• Portege R830 - Win 8.1 Value Added Package (Flash cards)

  Hello.

  First of all I would like to say that I used my Toshiba Portege R830 with all the operating systems since Windows 7 and I have never installed fresh OS.
  That said, I could not use Intel WiDi on Win10 and had to return to Win8 (DVD which I happily bought as well as the upgrade).

  I installed all the software Toshiba using Upgrade Wizard and for the first time since the 2011', there was no Flash cards available (drop-down menu shown with use of the Fn keys). I used to like 2.5 years on Win 8/8.1 and now his party and is not available to the installation...

  WTF? After a week, I discovered that cards Flash is not present in VAP 1.6 (only in 1.5.X.X or earlier).
  Unfortunately I can't install only stand-alone Flash cards (or can I?).

  And here my question: if I install VAP 1.5 (with Flash cards), can I (ANYHOW) strengthen certain elements (such as system driver) without uninstalling the previous version of VAP?

  From my experience when I run VAP 1.6 installer first thing it does is an uninstall complete previous versions.

  Please help me! I can't imagine who thought that removing the 1.6 flash cards would be a good idea...

  Driver Toshiba UE page provides the Key Utility for Windows 8 Upgrade feature Toshiba v1.00.6626.03.

  So, if you have installed Value Added Package 1.6.0130. You must also install the key function Toshiba utility

  

• Satellite A200-1DY - need added package for Vista 64-bit

  I can't find t value added package for 64-bit vista in any web update from Toshiba and I need because I installed the 64-bit version of Vista. It works fine but I need VAP and it seems that there is not.
  Why Toshiba don't have PPV for vista 64?

  Seems that the Toshiba VAP is not available for this model of laptop.
  Why? Who knows. ?:|

  But from my experience, Toshiba VAP contains some applications that control certain features of the laptop as FN keys for example.

  It seems that these applications have been outsourced and you can download it separately.
  For example this:
  _Flash cards support utility 1.48.0.3C_
  This tool is required to use the Toshiba Flash Cards (FN + F *)

• Re: Qosmio F50 - 12J - FN key doesn't work only with new value-added package

  Hello
  I have Toshiba Qosmio F50 - 12J and have problems with value-added Package v 1.2.28.

  I can't get flash cards to work. When I press FN key on nothing happens. BTW, I installed VAP on freshly installed Windows 7 64-bit. With the VAP previuos version that I tried on Windows 7, KeNotify.exe broke. Now there is no apparent crash, but nothing happens.

  Also, is there a problem with the utility of the Support Button (which touch). Whenever I reboot my system, all the white light LED on my laptop turned on even though I have them turned off.

  So, could someone confirm that they have a work of value added Package v 1.2.28 on Windows 7 64 bit?

  Hello

  I had the same problem on my Qosmio F50. The solution is just to install Flash Cards Support utility. This tool is designed for Vista, but I noticed that it also works on Windows 7. Just check the Toshiba page where you can download:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition the lighting buttons work correctly on my F50. You can use them properly, or what happens exactly, if you press one of them?

  By the way: there are two different versions of BIOS on the Toshiba site. You use the BIOS for Windows 64-bit? Check this box!