Satellite Pro 4270 LCD is slow.

Similar Questions

• Satellite Pro 4270 update Win ME, Win XP

  Dear all,

  I want to update my laptop Satellite Pro 4270 of Win ME to XP. If I start the XP, program update
  starts but a message appears: "component a Toshiba Satellite Pro 4200 unit... GSXS system." If you go forward with the
  Update, it is possible that one or more devices / components system are´nt works more.., please update
  the system... »

  What can I do to make the update correctly, that is to say that the components of the system work with new XP system?

  Are there updates regarding this problem?

  Thanks for your help.

  Mr. kohl
  Germany

  Hello

  Also, I wasn't able to find the drivers for Win XP for this device.
  However, if you want to install Windows XP you can do, but as said above some functions may not work.

  The last possibility is to check the other laptop computer series and try to install drivers other laptops that support the same features.
  Maybe you about success.

• Satellite Pro 4270 and network problems

  I just got a laptop, Toshiba Satellite Pro 4270... I installed win 98 on it and it works beautifully.

  But then I added LAN PCMCIA card in computer and wanted to do some sufring. I encountered a problem.

  In the next devices, win98 reports error handler:
  The NDIS. VXD, NTKERN. VXD or Chargers device for this device could not load the device driver. (Code 2).

  The card is 3Com Fe575C and I downloaded the latest drivers from www.3Com.com/warranty, but that did not help. I also ran regclean and reinstalled the card after that. Always the same fault. With my own laptop (win2k pro), the card works perfectly with no additional drivers, so the map itself is not defective.

  In addition, the Win98 find PCI card when starting, but I have no driver for that... Where can I get that? It does not specify which card that is...

  Hello

  I guess it is Win 98 Second Edition You are using on the 4270.
  Please go to driver download site and download the INF-update to the PC Card controller. I think this should solve your problem.

  While you are at it download the other drivers you need more.

  BR

  Tom

• Lack of Win98SE PCI/Sound driver for Satellite Pro 4270

  Hello

  I have an old Satellite Pro 4270 with Win98SE license.
  I have no driver CD and only a Win98SE installation CD. So I installed Win98SE.
  From Toshiba Web site show me a lot of drivers for Win98SE which I installed.

  But I have not found a driver for the PCI card that has a yellow "?" in the Device Manager. I do not mean the PCMCIA slots.

  I installed the driver of his Yamaha DS - XG, but I can not here any sound.

  So where can I find the PCI driver and sound driver better.

  John

  Great! :)

  Thank you for your comments.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• Need advice on the installation of WinXP/2000 on Satellite Pro 4270

  Hello!

  (Sorry for the redundancy of this topic on this forum, too.)

  Please, any suspicion on this strange problem will be appreciated.

  I bought a used Satellite Pro 4270, with totally empty 6 GB drive, a pretty neat and apparently well kept machine...

  But, trying to make a new clean Win2000Pro installed on it, as previously successfully dozens of times on other PC machines, installation will be ending in a minute after that is to start with the 4 on setupdd.sys error!

  On WinXPPro new clean install, that the procedure will be stuck in less than 10 seconds, without any error at all...

  So, it might be the reason the cause?

  I tried several different corrective actions on this machine and guess several reasons, the cause, for example

  -the hard drive works fine on other machines and has also been fully verified and updated in shape at low altitude
  -copies of CD installation I tried several all work fine on other machines
  -the BIOS has been upgrade v2.70 just some time ago
  -the CMOS was turned off, i.e. in default some time ago
  -the machine was torn off at the minumum on audio memory, PCI, USB, etc.
  -the machine must be somehow strangely, which on the BIOS or HDD?
  -are there some 'weird' IDE or other driver disappeared on this case?
  -tests with installing Win98SE and FAT32 will not lead to a better result, just somehow different...

  Best regards

  Pete v.

  Hello Pete

  It's a really bad situation. If you do clean install of the OS you na? t need any special drivers. Everything must be preinstalled when installing the OS is completed successfully.

  If you have a few HARD drive replacement, you should try to use it and see if the HARD drive is certainly not responsible for this. The fact is that W2000 and WXP can be installed successfully on many other old models of laptops and because of that I can't imagine that it is not possible to do the same on your device.

  Is it always that W2000 is supported for this device and you can find that page to download all the drivers of W2000 on Toshiba.

• Satellite Pro 4270: after update BIOS CPU speed at 250 MHz

  Welcome.

  I have upgraded the BIOS to version 2.7 (downloaded on toshiba website) in Satellite Pro 4270 and after her, my bus speed decrease to 250 MHz, so now I have Celeron 250 MHz instead of 500 MHz. You have some suggestions? Where can I find the old version of the BIOS in v2.7?
  Thank you

  HI Artur,

  Unfortunately, it is not possible to download an older version of BIOS on yout laptop since the BIOS update procedure is written to test later versions pre-installed and not too write.

  You will need to take your laptop to a Service partner certified to have a previous version of the BIOS re-installed.

  Kind regards

• Starting problems on the Satellite Pro 4270

  I have just received a satellite pro 4270 and told me it worked but when I turn it on all I get is a moon a cargo box that is not loading and a Sun I can here sounds of indoor work.

  Hello

  You also received the Toshiba Recovery CD?
  If Yes, try to start from the CD and try to refresh the operating system.

  You can also check if something appears on the external display.
  Try to connect the laptop to the second monitor.

  But generally, it sounds like a hardware problem it is a second hand unit, but I'm afraid the guy who sold you a defective phone: (m

• Satellite PRO U500 - LCD screen size is reduced

  Hi all,

  I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
  The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
  Is there a solution to my problem? I have to send in the audience?

  Thank you for the help
  Giuseppe

  H

  It is really strange, especially if you see the same thing in the BIOS settings?
  Since when did you notice this behavior?
  Do you use pre-installed OS original you got with your laptop?

  Have you done something that may be responsible for the issue described?

  I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.

• Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

  Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
  Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
  Have you tried the following:
  Setting of various parameters in the graphics properties and in the bios but makes no difference.
  It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
  It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
  I tried to start with / without battery - no difference.
  I tried to start without the disk HARD - no difference.
  I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
  I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
  I'm out of ideas and looking for a genius to fix it for me please!
  See you soon

  Hey Buddy,

  > It turns on but not at all to see clear
  This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

  It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

  In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

  Good luck! :)

• Battery 'empty' XP on Satellite Pro 4270

  Hi all

  Although the battery is quite new, it is displayed as 'empty' in my Satellite Pro XP 4270. When cross-checking with an another Satellite 4270 Win98 battery works well and indicated as '100% ' in the Toshiba power saver utility.

  Is there a special utility (such as electricity-saving) must be installed for XP? There is no given special driver vor 4270 / XP on the support pages of Toshiba and in view of the Act and so forth is recognized properly - except for the battery.

  Any suggestions or experiences wellcome,

  Kind regards
  Ed

  Hello

  the problem is that your machine is too old and was never shipped with XP. So if you didn t find utilities powersaver for XP on toshiba page then you won´t find anything. The machine has never taken supported for XP.

  Welcome them

• Problem of expansion memory on Satellite Pro 4270

  Hello

  I have a Pro Satellite 4700 and two memory modules:
  1 Samsung CL2 SODIMM 144 pin 128 MB PC100-222-620
  2 NEC 144 pin SODIMM PC100-222-620 128 MB

  Each of these modules work fine separately.
  When I put the two to reach 256 of ram, the system does not boot Windows XP - simply indicates that this driver pci.sys is missing/corrupted. Repair with the XP Setup disk hangs at the end.

  Is there any good advice or similar experience (I noticed that there is an upgrade of the BIOS to 4270 - that is the key)?

  Kind regards
  Ed

  Hello

  Perhaps this paper can help you http://support.microsoft.com/?kbid=330181

• Malfunction of the power on the Satellite Pro 4270

  I have a problem with my AC adapter (model PA3049U-1ACA): my 4270 Pro Satellite ceased to get power and it worked only with the battery. I have this problem only twice in the last 6 months, but the other times, the problem has been resolved just remove and reinsert the plug in the notebook. Instead this time it does not work.
  How will I know if the problem is due to a broken adapter or a faulty connector "DC in"?
  I searched online for a new AC adapter but I found only "compatible" adapters: they are good or if I should get an original?

  There is another problem: yesterday the internal modem no longer works: would it be a consequence of a failure of the power started yesterday?

  [Edited by: admin on 12 February 06 17:24]

  Hello

  Original AC adapter has this part PA2450U number. If the compatible one has the same characteristics and the same connector, there should not be any problem, but I personally prefer original parts. After you have connected the original adapter, you will be able to check whether the slot is maybe defective.

  As far as I know the modem functionality depends on many things (configuration, hardware malfunction) and control first entry in Device Manager. Please report the status of the modem in Device Manager.

  Good bye

• Screen keeps going blank on Satellite Pro 4270

  I recently inherited a 4270 and keeps going blank screen, everything works in the background and the image comes back if I close and open the lid.

  However, the screen may go blank after a minute or seconds.
  Can someone advise?

  It seems that you have a problem with your FL inverter (this is the part between the LCD and LCD-Tube cable).
  You have two options: you can do it yourself and try a small workaround I did on a similar machine or you can give the phone to an authorized servicepartner or a technician who knows enough about toshiba´s so he can solve the problem.

  Let me know if you want to try the workaround, but in this case, you need to open your machine TFT-cover.

  Welcome them

• Satellite Pro 4270 does not start

  My 4270 worked.
  I started it and electric lighting and light came on battery, light showed the loading, the drive HARD flashed once, a short noise light came the floppy drive, but nothing else.
  When I opened the case and removed the radiator/fan, I found the processor was overheating. Any ideas?

  Hello

  The laptop did the MESSAGE successfully? Did you hear a short beep?
  If this isn't the case, then there must be a hardware malfunction.
  But I have to disappoint you. No one will tell you 100 percent what s wrong.
  We can offer you all here only.
  Perhaps only the display is faulty and so you can see anything on the screen. In this case, you should try to connect the external monitor to check it out.

  But there may be something wrong on the motherboard or the memory modules. Well, to my knowledge the service partner can start some diagnostic test to locate errors.
  If you have no experience and no possibilities to control simple components then I recommend to visit the technician