Satellite Pro 4270 update Win ME, Win XP

Similar Questions

• Satellite Pro 4270: after update BIOS CPU speed at 250 MHz

  Welcome.

  I have upgraded the BIOS to version 2.7 (downloaded on toshiba website) in Satellite Pro 4270 and after her, my bus speed decrease to 250 MHz, so now I have Celeron 250 MHz instead of 500 MHz. You have some suggestions? Where can I find the old version of the BIOS in v2.7?
  Thank you

  HI Artur,

  Unfortunately, it is not possible to download an older version of BIOS on yout laptop since the BIOS update procedure is written to test later versions pre-installed and not too write.

  You will need to take your laptop to a Service partner certified to have a previous version of the BIOS re-installed.

  Kind regards

• Satellite Pro 4270 and network problems

  I just got a laptop, Toshiba Satellite Pro 4270... I installed win 98 on it and it works beautifully.

  But then I added LAN PCMCIA card in computer and wanted to do some sufring. I encountered a problem.

  In the next devices, win98 reports error handler:
  The NDIS. VXD, NTKERN. VXD or Chargers device for this device could not load the device driver. (Code 2).

  The card is 3Com Fe575C and I downloaded the latest drivers from www.3Com.com/warranty, but that did not help. I also ran regclean and reinstalled the card after that. Always the same fault. With my own laptop (win2k pro), the card works perfectly with no additional drivers, so the map itself is not defective.

  In addition, the Win98 find PCI card when starting, but I have no driver for that... Where can I get that? It does not specify which card that is...

  Hello

  I guess it is Win 98 Second Edition You are using on the 4270.
  Please go to driver download site and download the INF-update to the PC Card controller. I think this should solve your problem.

  While you are at it download the other drivers you need more.

  BR

  Tom

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• Need advice on the installation of WinXP/2000 on Satellite Pro 4270

  Hello!

  (Sorry for the redundancy of this topic on this forum, too.)

  Please, any suspicion on this strange problem will be appreciated.

  I bought a used Satellite Pro 4270, with totally empty 6 GB drive, a pretty neat and apparently well kept machine...

  But, trying to make a new clean Win2000Pro installed on it, as previously successfully dozens of times on other PC machines, installation will be ending in a minute after that is to start with the 4 on setupdd.sys error!

  On WinXPPro new clean install, that the procedure will be stuck in less than 10 seconds, without any error at all...

  So, it might be the reason the cause?

  I tried several different corrective actions on this machine and guess several reasons, the cause, for example

  -the hard drive works fine on other machines and has also been fully verified and updated in shape at low altitude
  -copies of CD installation I tried several all work fine on other machines
  -the BIOS has been upgrade v2.70 just some time ago
  -the CMOS was turned off, i.e. in default some time ago
  -the machine was torn off at the minumum on audio memory, PCI, USB, etc.
  -the machine must be somehow strangely, which on the BIOS or HDD?
  -are there some 'weird' IDE or other driver disappeared on this case?
  -tests with installing Win98SE and FAT32 will not lead to a better result, just somehow different...

  Best regards

  Pete v.

  Hello Pete

  It's a really bad situation. If you do clean install of the OS you na? t need any special drivers. Everything must be preinstalled when installing the OS is completed successfully.

  If you have a few HARD drive replacement, you should try to use it and see if the HARD drive is certainly not responsible for this. The fact is that W2000 and WXP can be installed successfully on many other old models of laptops and because of that I can't imagine that it is not possible to do the same on your device.

  Is it always that W2000 is supported for this device and you can find that page to download all the drivers of W2000 on Toshiba.

• Lack of Win98SE PCI/Sound driver for Satellite Pro 4270

  Hello

  I have an old Satellite Pro 4270 with Win98SE license.
  I have no driver CD and only a Win98SE installation CD. So I installed Win98SE.
  From Toshiba Web site show me a lot of drivers for Win98SE which I installed.

  But I have not found a driver for the PCI card that has a yellow "?" in the Device Manager. I do not mean the PCMCIA slots.

  I installed the driver of his Yamaha DS - XG, but I can not here any sound.

  So where can I find the PCI driver and sound driver better.

  John

  Great! :)

  Thank you for your comments.

• Starting problems on the Satellite Pro 4270

  I have just received a satellite pro 4270 and told me it worked but when I turn it on all I get is a moon a cargo box that is not loading and a Sun I can here sounds of indoor work.

  Hello

  You also received the Toshiba Recovery CD?
  If Yes, try to start from the CD and try to refresh the operating system.

  You can also check if something appears on the external display.
  Try to connect the laptop to the second monitor.

  But generally, it sounds like a hardware problem it is a second hand unit, but I'm afraid the guy who sold you a defective phone: (m

• Satellite Pro 4270 LCD is slow.

  I Satellite Pro 4280 14 "and have no problem. I bought a second hand Satellite Pro 4270 13 "but the graphics on the screen appear to be slow. Tests using Direct X cube rotation is unclear. I've set up two screens mod with a CRT 17 '' monitor and two screens side by side, the CRT is icon perfect, but the 13 "laptop screen is too blurry. So I know that there is nothing wrong with the graphics card, just the screen. Is this normal for this model? or y at - it something wrong? Parameters are defined with the latest driver S3 Savage, which has not changed anything with all of the display of "display panel 1024 x 768 laptop. Using only the mode screen 800 x 600. Clues? Thank you very much.

  Hello

  Please be shure that your 4270 13 "is a demonstration of DSTN. The sharpness of a DSTN display cannot be compared with a TFT screen, which is used in the 4280.
  The 13 "the 4270 has a internal resolution of 800 * 600 max. DSTN, 4280 with 14" TFT 1024 * 768.

  Best regards

• Satellite Pro A300 PSAG9E - Win 8 upgrade questions

  I decided to update my old Toshiba Satellite Pro A300 PSAG9E-00700TTE Vista to Windows 8.

  After two tries he has been successful. Vista made me mad, and when I decided to give my son, I wanted to work better.

  Toshiba doesn't seem to be willing to support the old models. (over 3 years).

  I can not even find this model code in the lists, the site does not seem to recognize the serial number.

  This is why all the Windows 8 upgrade tools provided are not relevant.

  I met a few minor problems before, but the Toshiba Turkey never replied messages, even those concerning the new products when I considered buying a new laptop. In the end I went for an Asus, which exceeds my expectations.

  I don't expect all support this time either, because of past experience. But I still want to try one last time.

  Is there a way to get the material in this workbook in Windows 8?

  > Is there a way to get the material in this workbook in Windows 8?

  Satellite Pro A300 is not that win 8 supported means that you will not find to win 8 drivers for this series, but of course, you can use Win 8 on this unit.

  In some cases, the municipality of Win 7 drivers would be compatible.

  Toshiba tools like VAP (value added package) to win 8 can also be used, but we must look for a Win 8 VAP released for other more recent models.

  Touchpad driver can be downloaded from the page of the Synaptics driver also other drivers like LAN or WLan can be found on chip manufacturer pages.

• Satellite Pro A100 - need win 7 driver for SD card reader

  I can't find driver for the next HD
  * SD card reader *:
  PCI\VEN_104C & DEV_803B & SUBSYS_FF101179 & REV_00

  other info
  System DMI information
  Manufacturer * TOSHIBA *.
  product * Satellite Pro A100. *
  version * PSAASE-00H004GR *.
  Sagna: * Win7 32 bit *.

  I have my serial number in
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  but for Win7, I found only
  Update the BIOS
  Wireless Lan driver
  and no SD driver

  I also German?

  Your old laptop model no is of course not supported for Win7 but you can try to use the Vista driver and most of them also works on Win7.
  Test if you please and let us know if this will help.

  By the way: as you can see this forum is English language only, so try please post in English. Who cares if you will make mistakes? ;) My English is not so perfect.

• I have wireless, ethernet on Satellite Pro M30 under Win XP

  I SP30, 2004, I had XP XP2 and installed what is proving to be a full XP SP3 ISO on the superior thinking, that I have been installed only SP3,

  Well now, I don't have a network, have tried each drivers I find, as well since the site of Toshiba and intel, but will not work.

  See photo here for Device Manager

  [http://i43.tinypic.com/1564znr.jpg]

  Wireless services are on, everything looks ok, WiFi seems same ok in device outside the yellow exclamation mark Manager.

  Any ideas what I can do?

  Until we start the discussion please can you exact laptop model. You posted in the category Satellite Pro M but you have a few SP30.
  Sorry, but I don't know which model is which?

• Satellite Pro L630-167 - Win 7 connection to the very slow connection menu

  Hello

  I have a Satellite Pro L630-167, which is connected to my network works.
  I have this problem where the screen stays just on the Please wait screen, it seems that the laptop is that connects something, but not really do anything.

  However if I had to start the computer in safe mode with network it works fine.

  Any ideas?

  I really need some help here.

  Kind regards

  JT

  Hello

  Have you noticed the problem even if the laptop is not connected to the network and if you want to load your user profile on Windows 7?

  If this isn't the case, then I guess that it has something to do with the network, and in this case, I recommend asking the network administrator for a few suggestions.

• Satellite Pro L500-1W4: win 8 cannot turn on WiFi

  Hello

  I installed 8 64-bit Windows on my Toshiba Satellite Pro PSLSAE L500-1W4
  Previously, I had Windows 7 64-bit on

  After the installation of Windows 8, I am unable to turn the WiFi on my PC
  But the driver for my wireless card (WLAN 802.11n Realtek RTL8191SE PCI-E interface card) is up to date, I have installed the latest driver by getting on the [Realtek site: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=48&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = true #RTL8191SE-VA2]

  I installed the latest driver for Windows 7 64-bit, this driver does not exist for Windows 8...

  The problem is that Windows 8 I lose the use of my Fn key so my driver must be very beautiful day and my card so wireless work I can't launch it (I have not a front button activation is mainly through the Fn key) I'm not going to connect

  Does anyone have a solution for me?

  Thank you in advance!

  + The message was edited: assignment has been translated.

  > The problem is that Windows 8 I lose the use of my Fn key so my driver must be very beautiful day and my card so wireless work I can't launch it (I have not a front button activation is mainly through the Fn key) I'm not going to connect

  You can enable and disable the WiFi using the option of Windows 8.
  In this case, the switch function FN command is unnecessary.

  Start the charm bar (Windows key + C)-> settings-> settings for laptop computer-> Wireless-> wireless (enabled/disabled)

  Now the wifi must be enabled

• Re: Satellite Pro L300 PSLB9E - Win XP WLan need driver

  I have a toshiba Satellite Pro L300 PSLB9E

  It came with Vista, but today I installed windows xp.
  I managed to find all hardware except for the wireless driver drivers.

  Please can someone direct me to the correct drivers?

  Thank you

  Hello

  I think you should test the Realtek WLan driver.
  You can find directly on the Realtek site.

  Test it!

• Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

  Hello

  When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

  My laptop Toshiba Satellite Pro U200 with Windows XP Prof

  Pleas help me

  PS. I Don t have a Toshiba Recovery disk

  The message is pretty clear!
  The common Module is not installed and therefore you can not update the BIOS.

  Visit pilot European Toshiba, download the common Modules for Win XP and install it.
  Then you should be able to update the BIOS.

  Concerning