stop unwanted and frequent

Similar Questions

• How to stop unwanted downloads

  I do not understand the answer.  I receive unwanted on my computer downloads and want to know how to stop it.

  There must be a way to stop, right?
  Thanks for any information that will control this problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/unwanted-and-automatic-downloads-to-my-computer/37194e56-013e-4474-a058-5e180b05cef9>

  Hi, Mary,

  In the post, you have joined this response to, the solution is specific to the software that was installed on the OP (original poster) computer.

  What are the unwanted downloads?  Suspicious software or Windows updates?

  How long have you received these unwanted downloads?

  You have recently installed new software?

  To suspicious software, restart your computer and start to hit the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete to rule out malware

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&id=16

  If these are updates to Windows, you control the downloads

  Start > Control Panel n

  Select Security

  Select turn automatic updating on or off

  There is a drop down menu where you will see "install Windows updates automatically
  Click the menu drop down and select "download updates but let me choose when to install them."

  Or, "check for updates but let me choose whether to download and install them."

  Click Ok when you are finished

• Error message: Message "Microsoft Windows Search index has stopped working and was closed" and TotalRecipeSearch Installer Plugin stub erros in Kaspersky.

  Original title: TotalRecipeSearch Installer stub Plugin

  Hello world

  I have problems with the startup of Microsoft Windows.  I get the Message below "Microsoft Windows Search Indexer stopped working and was closed"  a problem caused the application to stop functioning properly.  Windows will warn me if a solution is available.

  I also have a "TotalRecipeSearch Installer Plugin stub" and "My Web Search Bar for Internet Explorer, client e-mail and messanger clients". in my Kaspersky Anti Virus.  When I press fix it does not.

  Can someone help me?

  Thank you

  Irene

  Hello Irene,.

  Thanks for posting in the Microsoft Community.

  Since you are facing multiple problems, it would be useful if you can answer this question to help you further.

  1 Windows operating system you are using?

  2. have you done any recent software and hardware changes to the system?

  3. what Fixit try you?

  On the issue of Windows search, try the following steps:

  If you use Windows 7, and then try the troubleshooter, another run the Fixit of Windows search.

  Method 1:

  You try to run the search and indexing of convenience store and check if this solves the problem.

  Open the troubleshooter for search and indexing

  Windows search Fixit: difficulty Windows Desktop Search when it crashes or no results

  For more information, see the article:

  Improve Windows searches using the index: frequently asked questions

  Searching in Windows: frequently asked questions

  Method 2: Rebuild the search Index.

  a. open indexing and the Options to search by clicking the Start button, click Control Panel, click on Indexing Options.

  b. click Advanced Options, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  About the issue with Kaspersky, try the following steps:

  You can try to uninstall and reinstall Kaspersky and check if it helps:

  Uninstall or change a program

  Install a program

  Note: Make sure you have the software of security or disk configuration files to install this later.

  If you need further assistance, please answer and we will be happy to help you.

• Pavilion 6154ea: Radeon display error - display driver stopped responding and has recovered

  Received a UN expected error in the web search, actully screen off for a few seconds before receiving an error on the display driver stopped responding and recovery.

  Took a glance in the peripheral section where the 2nd adapter displays without any sign of error.

  After recently installing a new SDS moving from the HARD drive, reinstall windows 7 etc via the updates and the order to make recovery disc the laptop because I used receive a blue screen error frequently, so that the display driver does not not error occasionally when using the design programs.  Therefore assumed, needed a new HDD/SSD and factory restore.

  -Laptop computer has been cleaned withdrawal because keyboard, frame etc. with solvents as a cleaner. Therefore cannot be over heating the fan works hard to due and SSD.

  -Power supply has been connected to the time

  N ' was not overclocked as it is when using disk HARD aswell

  It wasn't until today where it happened again, without the blue screen though. So decided I would look at him and realized it is a common problem with the ATI drivers, when I assumed it was a HARD drive failure all along.

  This time the screen turned off for a few seconds, more then previously which is a little disturbing. Was only using a search engine with no program in the background. Infact havn't got round to reinstall files and software so the laptop is very clean and basic and works so don't know why I feel this fast.

  Need to know your opinion on this please, may not know... (Radeon HD 6490M)

  Thank you

  Hi @skibbles,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion dv7-6154ea Entertainment Notebook and problems with the display driver stopped responding. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. This resets the hardware parameters and contributed to others.

  Here is a link to test the material if you need it. It checks the pieces to see if something is a failure.

  Please let me know how it goes.

  Thank you.

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• mysqld.exe stopped working and was closed

  Whenmy computer starts, I get and error message "mysqld.exe stopped working and was closed". What is the solution?

  Hi vinaypahwa,

  Looks like you have an unwanted program that loads when Windows starts.
  The solution is to disable this program of commissioning by performing a clean boot:
  http://support.Microsoft.com/kb/929135
  You can also manually check which starts up by looking at the startup of the System Configuration dialog box tab and disable what you do not want to start.
  I hope this helps.

• The unwanted emails, how can I stop unwanted email, but only to keep my contacts?

  Being again in the computer, how can I stop unwanted email, but only to keep my contacts?  I was online for the health of the op looking for my husband is disabled and I now get mail from anywhere.

  Thank you for the quick help.  I'm still learning, and now I know I have to be very careful as to who or what I give my E-mail address to.   BRAVO!  To the author.

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• The last 3 times I clicked on auto updates of firefox firefox has completely stop working and I have to open the Explorer and again to download firefox.

  I'm afraid to update firefox since the last 3 times I did so firefox stop working and had to be reinstalled.

  I'm glad it works again. This is the important result and thanks for posting back.

  Repeated to uninstall and reinstall Firefox often do not help.
  Clicking on the pop-up of unknown or doubtful origin, it is always a bad idea.

  Screenshots will help if you are still having problems.

  Connects to any future reference is not to the internet, after a new installation may be related to problems with the firewall or your security software not recognizing Firefox.

  • Difficulty of problems connecting to websites after Firefox update
    • Configure the firewall so that Firefox can access the Internet
    • Configure the Windows Firewall to allow access to the Internet Firefox
  • Other issues, see Firefox cannot load websites but other browsers may

• "Display driver stopped responding and recovered."

  It happens every time I try to play a video on YouTube. The audio, but the video does not appear. My laptop slow for a few seconds then screen goes black then back to normal and the notification "display driver stopped responding and has recovered" is displayed. Even after that, there is no game even if the sound is not still a Visual.

  This only happens in Firefox. Videos YouTube work perfectly well on Google Chrome.

  Hello want, please see if the problem is always present when you update the driver for your graphics hardware for the new version: http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages

• My 6 month Apple Watch stopped charging and will not restart.

  My 6 month Apple Watch stopped charging and will not restart.

  Hello

  Try the following steps:

  Charge your watch about 2.5 hours, making sure you follow the instructions in charge here:

  Check your battery and load your Apple Watch - Apple Support

  After charging, if your watch has not already restarted automatically:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -If it still does not start, then try force it restarts again: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If the problem persists, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

  https://Twitter.com/applesupport

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support

• My update seems to be stuck to install. Any way to stop it and try again?

  My update seems to be stuck to install. Any way to stop it and try again?

  MY update is also at a standstill.  I turned the computer and disable several times, but nothing works.  Tried to start in "safe mode", but which does not work either. Anyone have another suggestion?

  IMac, mid 2011

• Why do I get "Message Agent wants to use the"login"keychain and how to stop it and 7 other bunch of connection."

  Why do I get "Message Agent wants to use Keychain 'login' and how to stop it and 7 other bunch of connection points most every time I login?

  Hey Roman man,

  I understand that you see a prompt for your login keychain. I can't anymore how do I fix this.

  Now if you have recently changed your password for your Mac, then the password for your keychain will need to be updated. You can make this change in the Keychain Access application. If you do not know the password, then you need to reset the password in the keychain. Take a look at the article below for specific details get this sorted out.

  If your Mac keeps asking for the password in the keychain
  https://support.Apple.com/en-us/HT201609

  Take it easy

• Video has stopped playing and has not saved after alert imessage

  During video recording on my iPad, I received an alert from iMessage.  The video has stopped playing and did not save what has been already registered.

  Is this a normal behavior or y at - it a setting I can change to block all alerts being recorded?

  Thanks in advance.

  Hi sabfa,

  If you do not want to be interrupted when you save the video on your iPad, try to activate do not disturb.

  Use of do not disturb on your iPhone, iPad or iPod touch

  Turn on or off the do not disturb

  When do not disturb is activated, a Crescent Moon , or half-moon, an icon will appear in the status bar. There are two ways to turn on or off the do not disturb:

  • Tap Settings > do not disturb. Choose the manual option to activate the do not disturb sign now or set a schedule.
  • Swipe up from the bottom of the screen to open the Control Center. Tap on the Crescent Moon.

  

  Change your settings

  You can also choose if you want to be disturbed:

  • Allow calls to: allow calls from anyone, person, your Favorites or stored on your device or your iCloud account specific contact groups.
  • The calls repeated: If someone calls you twice within three minutes, the call will not be silent.
  • Silence: select silencing calls and notifications always or only when the device is locked.

  Take care

• Error: The display driver stopped responding and has recovered

  Sometimes (one times a day at least)
  video driver says:

  "Display driver has stopped working and has been restored! »
  Someone suggests the cause or the problem?
  Thank you

  Hello

  I found an interesting about this error - http://support.microsoft.com/kb/2665946 article
  I do not know what computer you are using, but what you can try is to visit the Toshiba download page and check if the latest driver is installed on your machine.

  To be honest, from time to time the same happen on my machine. I use Win7 64 bit. It happens usually if several applications are open and that one of them is active in the flash player window.

  Can you please tell us which model of laptop you have and which version of Windows is installed?