Satellite Pro A40-111 - Windows XP Pro Russia - how to change to Windows XP en

Similar Questions

• Satellite Pro S330 - how to change the supervisor password?

  Hello!

  On a Satellite Pro S330L Windows is broken, so I can't access TOSPU. EXE. If I know the supervisor password, I can't enter the BIOS program. Bootsequence is HDD-..., so I can't boot from DVD! What can I do to install a new OS?

  Thanks for your help! JO

  Hi jonol,.

  If you know the supervisor password, everything is ok. Just so access the BIOS after you turn on the laptop and enter the password. Now you are in which you can change the BIOS boot order, remove the supervisor password, etc..

  Check this box!

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Satellite Pro A60: How to change the size of the AGP aperture?

  Hi people!

  I recently bought a laptop Satellite Pro A60 series.

  I also had an upgrade to 512 MB RAM module for it.

  Since then a few games that I try to launch slow area. (it wasn't before) I have increased the Frame Buffer, but wish to increase the AGP Aperture Size as well, but there is no option for this in the BIOS?

  Is there a fix that solves it?

  Hello

  Well, you said that the games run a bit slowly after upgrade memory.
  In this case, I guess that the graphics card is not really the problem.
  As far as I know if memory modules are not similar system could runs unstable.
  In addition, after the upgrade, you should try to install this new programs (games).

  Best regards

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite Pro A300 - How can I turn on my webcam?

  Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

  Hello

  The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

  But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• Satellite Pro L700-10 t: change Windows 7 64 bit to 32 bit

  Hello everyone!

  I want to work with Windows SEVEN 32 bit for my Satellite PRO L700-10 t.
  Because some applications don't work very well on Windows 7 64 bit!

  What can I expect this?

  Thank you
  André

  Hello

  L700-10 t is unknown to me but the L770-10 t.
  You are owner of the Satellite Pro L770-10 t?
  http://za.computers.Toshiba-Europe.com/innovation/product/Satellite-Pro-L770-10T/1108178/toshibaShop/false/

  According to this page of specification of Toshiba laptop was preinstalled with Win 7 64 bit only.
  So if you want to use the 32-bit version, you must buy the Win 7 32 bit of retailer

• Satellite Pro M70 - how to install Windows XP?

  I bought a Toshiba Satellite Pro M70 of second hand and I want to reinstall WinXP.

  I did not have the Toshiba Recovery CD but I have a my own WinXP disk. It would be OK to reinstall Windows with my own WinXP disc?
  If the answer is Yes, should what order I install the drivers

  Your help is appreciated

  Hello!

  In my opinion it's is not a problem if you use your own Windows XP to install it on the laptop that you can do this of course.

  Have you checked the Web from Toshiba site?
  You will find a document setup instructions for Satellite Pro M70. This is a list of the recommended driver and the order of installation of the tools. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite Pro 4600: how upgrade to Windows XP?

  Hello
  Someone gave me an old Satellite Pro 4600 which works very well with Windows Millennium, but this person lost the Toshiba CD with drivers and utilities. I can't find anything about Toshiba hard disk.
  Is it possible to upgrade to WIndows XP? I have the Windows XP Pro CD, but nothing for the drivers of Toshiba.

  Of course you can improve it to Windows XP Home edition.

  I checked the download page of Toshiba under http://eu.computers.toshiba-europe.com and it has listed many drivers of Windows XP Home edition.

• Satellite Pro S300 - how do I uninstall TrueSuite to install Win 7 Win 8

  I put my Toshiba Satellite Pro S300 from Windows 7 to Windows 8 at level and I am stuck at the point where I need to uninstall first TrueSuite Access Manager.

  It is not listed under programs and features, so I can't uninstall it from there.

  I downloaded util_tam_uninstall_TC00240000B.exe and run it without success.

  Any suggestions?

  > It does not appear in programs and features, so I can't uninstall it from there.

  I can't believe that if the utility is installed, it should appear in the box programs and features.
  On the other hand also the fingerprint driver is installed
  So, you can check if you need to uninstall the driver of the fingerprint of the Device Manager.

• Satellite Pro U940 - How to get down to win 8 to Win 7 64 bit?

  In fact I want laptop e downgrate (Satellite Pro series U940) since Windows 8 for Windows 7.

  But, when I chose the hard drive to format and install the new OS (W7 64 bit) I read this message: "no driver signed device not found.".

  Guys, please help me... !!

  Please read this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=72365

• Satellite Pro P100: How to recover BONES after replacing HARD drive

  Hello

  I bought a satellite Pro P100, and I want to change my hard drive
  I have the CD restored, but I think that this will not work with a new hard drive!
  What can I do to recover my windows?

  Sorry for my englich!

  Thank you

  Hey Phillipe,

  Your recovery CD works on what hard drive install you in your laptop. Are the only factors affecting the hard disk of your choice: -.

  1. compatibility of the BIOS (should not be a problem with the P100 model)
  This model mainly old laptop impact where the BIOS could not recognize larger drives.

  2 form factor
  You should make sure that the disc you choose has the same physical dimensions as your
  existing drive.

  3 speed
  Disks hard more quickly improve access times so check out 5400 and 7200 RPM. (there may be a problem
  with the generation of heat so 5400 RPM is probably better than 7200)

  The are no problem with Windows licenses as the license applies to the operating system itself and not on the hard disk on which it is installed.

  Kind regards

• Satellite Pro U200: Display Resolution changed to 1024 x 768, after sleep (Vista)

  I have some problems with my Satellite Pro U200 (WinVista, BIOS 3.50, Display Driver 7.14.10.1217).

  After the exit mode standby, the display shows the correct resoluion of 1280 x 800 for a second and then goes to 1024 x 768. It's very annoying.

  I tried to uninstall / reinstall the display driver, but it did not help.

  Does anyone have an idea?

  Well, I remember a similar problem happened on U200 with Windows XP and Windows XP MCE.
  The update of the graphics to the version 6.14.10.4543 driver has solved this strange switching

  Maybe the next update of the graphics card driver will clear this issue