Satellite Pro A60: How to change the size of the AGP aperture?

Similar Questions

• Satellite Pro A60: How to replace the drive?

  Satellite Pro A60 replace DVD player - need repair
  Or does anyone know how to remove the drive of this laptop Bay

  Post edited by: chrielli

  Hello

  I think the disk replacement procedure is very similar to replacements on other laptops.
  To remove the STRANGE bay module follow these steps:

  1. turn the computer.
  2. remove the black binding screws.
  3 turn the computer over and open the display.
  4. push the module bay ODD.

  All that s. It s not achieved with a screw.

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Satellite Pro S330 - how to change the supervisor password?

  Hello!

  On a Satellite Pro S330L Windows is broken, so I can't access TOSPU. EXE. If I know the supervisor password, I can't enter the BIOS program. Bootsequence is HDD-..., so I can't boot from DVD! What can I do to install a new OS?

  Thanks for your help! JO

  Hi jonol,.

  If you know the supervisor password, everything is ok. Just so access the BIOS after you turn on the laptop and enter the password. Now you are in which you can change the BIOS boot order, remove the supervisor password, etc..

  Check this box!

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Satellite Pro A60 - how to get the recovery CD?

  Hello

  I have a Satellite A60 and my utils / driver disk is not in use.

  Is there anywhere I can download or there at - it somewhere that I can buy one?

  Especially the "FN" shortcut key will not work. I tried to download the utilities from the page drivers but its defo not to play ball.

  Any help on that would be great.

  ATB
  Steve

  Hello

  I found a new page of Toshiba.

  https://backupmedia.Toshiba.EU/landing.aspx

  It s an online store of Media Backup of Toshiba Europe and you should be able to order your CD of restoration on this page.

  _Regarding your FN order issue: _
  If you are using Win XP on your laptop, you must install the Hotkey utilities for display devices and Hotkey Utility get the FN buttons work.

  One thing is very important; If you install your operating system manually, please ensure you install drivers for Toshiba and utility in the right order. On the Toshiba driver page, you can find the installation instruction txt file and you would find the mentioned order insall. Follow this all in the driver installation procedure!

  Good bye

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite Pro A60 - where to buy the recovery CD

  Hi newbie here.
  I have a Satellite Pro A60 and it gives my son for his college stuff.
  I want to reinstall XP Pro, but I can't find the CD that came with the laptop we moved house ect.

  Is there anywhere where I can buy an of for the laptop, so I can do like new so that he can use it how he wants?

  Thank you very much

  Yes, you can order this CD with the service provider authorized in your country!

  Just contact the guy and order it. It shouldn't t be very expensive.

  Best regards

• Satellite A100-727: how to change the config of media buttons?

  I have a Toshiba laptop Satellite A100 727 and it was these media buttons Nice on the left side of the key board.

  They are great, but I have no idea how to change the keys.
  I had put them to launch internet and exploited with mediaplayer, but after that I had to do reinstal windows, my harddisck crashed, functions on the buttons has changed, they start up the InterVideo WinDvd.

  Does one know how I can change the functions of the buttons?
  I read something about the tools of Toshiba, but I can't find them anywere.

  TYVM in advance

  Hello

  Using TOSHIBA button controls, you can set the key features. If you have it installed you can find the TOSHIBA controls icon in the Panel.
  You can also find if you open TOSHIBA help > Optimize.

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Office jet Pro 8600: how to change the folder for the scans on my Apple?

  Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

  Thanks for the help!

  Hi @jgossc,

  I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

  To change the destination please follow the steps below and let me know the results of your efforts:

  • Open HP utility
  • Select Scan to the computer
  • Click Scan tasks to change
  • Choose a shortcut to scan
  • Select Edition
  • In the options listed here, you should see scan destination

  If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite A210-109: how to change the color temperature of the display?

  I want to know how to change the color temperature of the screen of my laptop? Theres no option in the ATI catalyst and no toshiba utility, where I can change this? I have the latest installed toshiba display drivers.

  Hello

  you mean the gamma settings? I don't know if the ati drivers are able to do, but you can try the program "powerstrip" (www.download.com/PowerStrip/3000-2086_4-10395724.html), which can change the color and the parameter gamma for graphics cards.

  Just give it a try and you will get your favorite color settings. :)

  Welcome them