Satellite Pro A60: Copy of lost restore disks required

Hi hoping someone could help here, I have a Satellite Pro A60 PSA65E-01S00UEN model number.

To try and keep this short film that he had problems and was formatted with the intention to restore using the restore disks, unfortunately these not found is now :-(to keep things simple, it would really help if I could get hold of a copy of the restore discs, anyone would be willing to help me here please Obviously I would be willing to pay for the discs and postage costs.

Thanks in advance Kev.

Hi Kev,

You can get new copies of any Toshiba authorized Service partner restore disks. I don't think they are too expensive.

Kind regards

Tags: Toshiba

Similar Questions

  • Satellite Pro A60: Recovery disk damaged

    Can someone help me get a new satellite pro A60 recovery disk. My first drive was damaged.
    Thank you
    carol9430

    Hi, Carol Ann,.

    You can get the new partner authorized Service Toshiba recovery disks. You will find them listed on the Toshiba Web Site.

    Kind regards

  • Satellite Pro A60: Screen does not

    I used my Satellite Pro A60 yesterday and everything was fine, I tried to use it today and the screen lights it is just white... Please can someone help I am lost without her, the blue light comes on, but nothing on the screen please help.

    [Edited by: admin on 3 July 05 13:22]

    Hello

    you see the Toshiba logo red when it starts or a screen empty?
    Toshiba logo: so you have a software failure, and you should backup your data and do a restore
    White screen: while there must be a problem with your hardware! Contact a Service partner and he will repair under warranty!

    Good bye

  • Cannot start WXP installed on my Satellite Pro A60

    Hello

    I just got a Satellite Pro A60 of second hand. He had installed xp pro, but I did have no password. , so I formatted the drive and made two partitions. There are 30 GB and the other approximately 7 GB.

    I tried to install a WXP Pro copy that has worked for me before, but he would not complete the installation. Now, I have a Toshiba Recovery disk. When I use the recovery CD, the installation goes fine, but when its full and restarts, the laptop does not start in Windows.

    He comes to Toshiba screen twice then WXP logo appears for a moment about 10 seconds or more, then go back to the f8 screen. Last time, he said it could be due to a hardware change with these lists of 'safe mode' options, safe mode with command prompt mode implementation network, security, last known good configuration. I tried all the but still cannot boot into windows.

    The hard drive has the files I used l-soft active@killdisk unerasor tools, change password and partition Viewer, I could see the file system of windows etc. Laptop has 512 MB RAM, 40 GB drive HARD, Celeron.

    I just updated the bios to V1.90 by CD-ROM. Please can someone help me?
    Thank you

    Post edited by: selftought

    Post edited by: selftought

    Hello

    You have installed the operating system from the recovery CD Toshiba but have you used the original Toshiba comes with this laptop recovery CD?

    The BSOD appears mainly due to hardware failure or the software flaw serious
    The Toshiba Recovery CD contains all the drivers needed and tools, but if you use a recovery CD badly the pre-installed drivers can cause the error and BSOD could appears.

    However if some hardware like the memory module or the graphics card is damaged the BSOD are included also.

  • ATI error and no windows - Satellite Pro A60

    Hello

    When I start my computer, I get a blue error screen c0000415
    A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

    "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

    Oh the fun.

    "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

    I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

    Any suggestions much appreciated - thanks in advance...

    [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

    Hello

    As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
    The installation of SP2 should help.

    This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

    You should try to get an original CD of Windows XP with or without SP2.
    The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

    Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

  • Satellite Pro A60 - installed Belkin Wireless but can't find a wireless adapter

    Hello

    I have a Satellite Pro A60, and late last year, I restored the disk hard as he saw all sorts of questions. After that it worked fine, everything fine, reinstalled outside the wireless card. I tried several times to reinstall my Belkin Wireless PCI card that slots on the side, but when I do (using the Belkin internet software make sure is the right one) it comes up saying ' found Incompatible driver version. Failed to load the application '.
    After restoring I reloaded the stuff about the tools and utilities disk (most of it anyway and all relevant esp network), after that I reloaded XP SP2 (would I have done that first?) Is this the problem?)

    Belkin card tells me that I have no adapters (huh?) but when I go to the information system there is no problem of devices and Im not really sure whats missing - clearly something is but that? Im not great with computers so would really appreciate the help!

    The device manager didn't show any problem devices.
    But the installed wireless card has been published in the device under network adapters Manager?

    The Toshiba recovery image contains a Wlan card and software driver Atheros Wlan Card. It is perhaps a reason for the problem, try to remove this software from the operating system.

    However, for me it looks like you used any compatible WLan card
    I discovered that the Atheros AR5001X Wlan card could be compatible

  • Satellite Pro A60-138 PSA65E - cannot boot from c WEIRD

    Hello
    I bought this laptop on ebay, with no cd or manual.

    Satellite Pro A60 GR
    MODEL PSA65E-01K032GR NUMBER

    Hard drive is formatted.
    I tried to install xp, because I start the laptop it just says: "control system.
    Then press [F1]. "If I press F1, it tries to read the cd and gives up after a few seconds.

    If there is no cd in the cd drive there simply nothing.
    I tried to start the bios menu but everything works,(F12,F8,del) key.

    Is there something I can do?
    installing drivers or anything like that?

    Hello

    In order to access the BIOS please press F2, then ESC.
    This should load the BIOS and you can change the boot order there.

    In addition, you can press F12 at the beginning.
    This will allow the menu on the screen where you can choose the STRANGE as a source of start-up.

    But are you able to boot from another CD?
    The CD/DVD drive is unable to read the disc, and therefore the boot process fails

    You could also burn this disc Win XP on another CD and could use the new disk to the start I did with my old laptop because the CD/DVD drive didn't read the old CD.

  • Satellite Pro A60 - recovery question

    I tried to do a cover of product on a satellite pro A60

    I put in discs 1 and 2 according to the instructions and everything seems to work ok.
    Then tells me to remove the recovery media and restart the computer using ctrl alt del

    It restarts and goes through toshiba screen and on the screen of windows xp... then a blue screen that says please wait while windows prepares to start... then on windows xp with a saying of hourglass professional screen, please wait. Nothing else happens.

    It does nothing else, we left it for 3 hours today and it didn't go past this screen.

    Everyone knows it or can give me some tips on how to make the laptop still works?

    I installed windows and the Toshiba Recovery many times and I didn't noticed this problem on any of my books.
    I remember that once my Windows installation operating system has failed. I put t know why
    But I just formatted my HARD disk, erase all partitions and started the installation again! The procedure is completed successfully and portable started in the Win XP operating system.

    You must understand you problem could be linked to the software only or the operation of the equipment (HARD drive?)

    One question; have you used the recovery CD Toshiba compatible? I read repeatedly on similar problems, and finally the wrong recovery CD was the reason for start-up/installation problems.

    Make sure that sue you the good CD and then I would recommend repeat the installation of the OS.

    Good bye

  • Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

    I had a Satellite Pro A60 for about 3 years without problems.

    Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

    No matter what wil suggestions appreciated!

    Thank you

    Found this Microsoft Knowledge base article:
    You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

    http://support.Microsoft.com/kb/315311/en-us/

    Can it help

  • Missing drivers for a Satellite Pro A60 PSA65E

    Hello

    Just to put the hand on this Satellite Pro A60 PSA65E - 01H00U8K.
    It was really slow and crashing regularly so I reinstalled windows XP by using a copy of XP I had round lie and the license key at the back of the laptop.
    I have not the original CD media provided with calculation, so I used the following link for the
    [PSA65E driver on the site of toshiba UK page | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 193 & selSeries = 239 & selProduct = 537 & selSho rtMod = 384 & language = 13 & selOS = 10 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true].

    I installed all the drivers and software on this page, but my device manager is always showing three elements as not installed:
    Network controller
    Modem PCI
    SM Bus controller

    Can anyone give me specific instructions as to where I could find the drivers for these items? Or that drivers on the driver page to attempt to reinstall!

    Thank you very much, Tom

    Hello

    SM BUS controller-> Flash Media Driver

    Network-> driver LAN or WLan controller is
    Note: there are various different manufacturers Intel, Atheros WLan drivers, etc.

    PCI modem-> you need driver modem.

    PS: don't forget that the SP3 of XP Win is installed too.

  • Satellite Pro A60: How to replace the drive?

    Satellite Pro A60 replace DVD player - need repair
    Or does anyone know how to remove the drive of this laptop Bay

    Post edited by: chrielli

    Hello

    I think the disk replacement procedure is very similar to replacements on other laptops.
    To remove the STRANGE bay module follow these steps:

    1. turn the computer.
    2. remove the black binding screws.
    3 turn the computer over and open the display.
    4. push the module bay ODD.

    All that s. It s not achieved with a screw.

  • Satellite Pro A60: NTLDR is missing

    Satellite Pro A60 tells me when I turn on that I have a ntldr is missing, press ctrl + alt + delete to restart.
    So I tried reinstalling and it will not let says me I file setupdd.sys could not be loaded error code is 4 Setup cannot continue to press a key to exit.

    Hello

    If it of not possible to restore the operating system of the Toshiba CD recovery if the HARD drive or only the partition is damaged or corrupted.
    According to Microsoft description message Setupdd.sys could not be loaded. 4 error code may occur if your computer contains a material that is damaged or is not compatible with Windows XP.
    http://support.Microsoft.com/kb/330181

    "Well, I also found Microsoft troubleshooting document on the NTLDR is missing ' error message.
    http://support.Microsoft.com/kb/318728

    I think you should follow the guidelines. If it doesn t help trying to format the whole HARD drive, delete all partitions and launch the installation from the original Windows XP boot CD

  • Memory should what upgrade I buy for my Satellite Pro A60?

    Hi, I have a Satellite Pro A60 PSA65E, who currently has 192 MB of RAM and 2.8 GHz Celeron processor.

    My problem came when I tried to install Adobe Creative Suite 2 on it, but it would not allow me to do so because he needed 384 MB of RAM to run it. I was wondering if someone could tell me what RAM upgrade is compatible with my machine and if it inserted in another port or if I have to get out the old and replace?

    Thank you
    Donald

    Hello

    your laptop is 256 MB internal memory, I'm not sure why it shows only 192 MB. This internal memory can be replaced only by a technician. But you also have a currently unused memory slot, in which you can place a maximum of 1024 MB of RAM.

    Here are the modules from Toshiba lets you:
    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Good bye

  • Satellite Pro A60 USB TV tuner

    Does anyone know of a USB TV Tuner (PAL) who will work with a laptop Toshiba Satellite Pro A60 with integrated ATI graphics card?
    I tried 2 so far, Pinnacle PCTV and Compro Videomate Action, neither worked.
    The problem seems to be with the graphics processor ATI IGP

    Hello

    have you checked www.hauppauge.com?

    They're also good tuners TV, but please ask a Tech support guy. If there are problems with the ATI 7000 IGP chipset!

    Good bye

  • Toshiba Satellite Pro A60 Celeron 2.8 GHz, 256 MB of volume?

    Hello

    I recently bought a Toshiba Satellite Pro A60 and I am pleased with the point, but despite the turn the music full volume and even the windows sounds are very quiet? To me it seems not be significantly quieter than other notebook that I used. This is how the element should work, or would that be a possible problem?

    Thanks for any help or advice you can give.

    Hello

    Did you scan you check all parameters in audio sounds and Audio Devices Properties?

Maybe you are looking for

  • Satellite C660-258 - Internet connection issues

    Recently, my laptop started to suffer serious problems when you try to connect to the internet.My download and upload slow to a crawl (only for laptop) Usually (according to speedtest.net) I get around a download about 4 but on my laptop it reaches m

  • M10 lock only on battery

    My race of Satellite Pro M10 Pro XP hangs but only when on battery. No problem when it is plugged in. Keyboard and mouse Th freezes but continues to Flash the mouse icon. Occasionally, I get a blue screen of death indicating a material error, somethi

  • Broken screen on C660 - 1 7 support

    Hi I broke the screen support on my C660 - 1 7. Does anyone know where can buy a spare part? Will try and stare at me. As is - anyone have an idea of the cost for repair?

  • My silverlight player will not work?

    I disagree as to why my silveright player will not play the next I thread'v installed, uninstalled and reinstalled but it usually always apear when I try to play the next thread http://fixplay.ninemsn.com.au/secretdiaryofacallgirl/4/8269805/episode-2

  • HP ENVY 5660: Project fast printing on HP Envy 5660

    Just bought a HP ENVY 5660 we use with our Mac. How will we change the parameters of the Fast project standard print quality? Do not see this option anywhere when we go to print.