Satellite Pro A60 has just turned off and won't come back

Similar Questions

• BlackBerry smartphone phone off and won't come back

  Hi, two days ago my Blackberry Curve ran out of charge and Won ' t back lights. When I load it, the phone turns on indicating that the current passes through, but it just won't come back. A minor and independent, it's that when it still worked, I couldn't download Whatsapp. Please help if you have an idea of what might happen. The device never fell down

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Good luck and let us know!

• Satellite Pro 6100 often randomly turns off and bad RTC error

  Hi, I recently bought a sp6100 and it worked fine at first but now it goes out often random and comes with BAD RTC ERROR at startup. As a musician who uses the pc, it is very painful and I lost much of my work. Anyhelp would be great. Conrad

  HI Conrad,.

  Power loss random is usually a symptom of overheating and can usually be cured by cleaning all dust and lint that built into the CPU radiator. A vacuum cleaner is a useful ally in so doing. Just put the hose against the grids of aspiration air for a few seconds.

  The RTC error refers to the adjustment of the real time clock which is normally held by a small battery, usually mounted on the motherboard of your laptop. It is used to maintain the settings of the BIOS (including date/time) and is completely separate from your main laptop battery. Modification of the RTC (or CMOS) battery will involve some disassembly, so is best left to an authorized Service partner.

  Kind regards

• Phone just turned off and won't turn back on! only 3 weeks

  Is that what I should try or should I just go back to Carphone warehouse?

  @cushy

  It's strange, but you can try this:

  connect the phone to a wall charger > press and hold the power & volume for 10-15 seconds > let charge for 3 hours > check if it restarts.

• Shuts off and won't come back on iPad. Just shows the Apple logo. Does that mean and what should I do now?

  When I woke up yesterday morning after charging my ipad I just couldn't turn my ipad until I plugged in the laptop... worked well

  Yet once, I woke up this morning it's the same thing, but now all I see is a dim apple logo and it will turn back not... do not update AFAIK.

  Does that mean and what should I do?

  Try a forced reboot and see if that fixes it. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

• I was updating my iPhone 6-9.2 software, you know how it turns off and when he comes back you put up again? Well Meanwhile I continue to receive messages from text/iMessage

  I always receive text/iMessages while the phone is updating new software

  These are 2 different questions.

  Question 2 - No.

  Question 1 - (in the title of your message) when you have finished the installation process, you should begin receiving messages again.

• My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  Looks like you have jailbroken your iPad.

  You must restore like new with another computer.

• "HP OFficejet Pro L7680 turns off and won't turn back on"

  HP OFficejet Pro L7680 turns off and won't turn back on.

  Hello untech,.

  I see it's been a while since you have posted with us on the HP Forums.  Please, let me take a moment to say "Welcome Back".

  I see that you have a problem with the printer l ' auto turn off and not turning it back on.

  You happen to have the printer power cable connected to a power strip/bar?  If so, please try to connect the printers power cable directly to a wall outlet.  Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  The printer in the document is a LaserJet printer but this document is intended for HP products in general and only use the LaserJet printers for example.

  I'll also include a document indicating when the HP printer will not be running or to respond when the power button is pressed.

  If by chance the problem is not resolved after you complete the steps described, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Please do not hesitate to write me again if you have any other questions.

  I wish you a great Monday!

  See you soon,.

• iPhone 5 turned off and won't turn back on

  Hi guys, my iPhone 5 turned off and won't turn back on despite my efforts to load. He doesn't have anything happen when the charge as the battery showing it is low or that the phone needs to be recharged.

  http://cosmouk.cdnds.NET/15/43/1445347217-iOS-low-battery.PNG

  It doesn't have this show in any every time I try to turn it on and even while there is no evidence a load.

  I corrected it when I contacted Apple support. They broke down the power and Home button to force restart it. Works fine now, battery has been replaced but because she is "consumed".

• Hi, my iphone 5 turned off and won't turn on.

  My phone was in charge all night, and it turned off this morning showing no signs of the battery. I put it on charge but it turned off and won't turn on again. He has been in charge for 3 hours now, what should I please?

  Try to maintain Power + "Home" button until the Apple Logo appears

  If prior work don't try connecting to iTunes holding the home button & restore the phone!

• Satellite Pro A30 is randomly turn off

  Hello

  I have a Satellite Pro A30 and from time to time it just turn off. It happens to any application that I use. It will then restart and on my desk, I will get the message that my Active Desktop was stopped unexpectedly and asks if I would like to turn it back on. I noticed that it does appear that this operation when the power supply is connected.

  I can't be sure if it happened only when he has worked outside the network, but I'm starting to think it is. The charger seems to work fine though as it loads fine and power mode changes when it is plugged.

  Any help anyone can give would be greatly appreciated,

  Thanks in advance,

  Babin

  Satellite Pro A30 is quite old and probably you have not cleaned up until now. If the unit tips suddenly OFF, independent, running application it may be due to overheating.

  It is possible the unit turns off often when it is connected to the power running, because in this case, the standard profile in power management is full power. Power supply battery, CPU activity will solve automatically on the lower level and maybe you can do a little bit more.

  In any case, I recommend you to clean the unit and remove the dust. You can try to do this alone, but I recommend doing it on the professional way but you can make a decision how to proceed.

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Podcast OGG resume problems when the device has been turned off and on again

  Even if the rocket + is listed as support AAC, it seems it does not support AAC files over a certain length, otherwise some file size.  (Someone, is it a value of its own thread?)

  For this reason, I need to convert some podcasts to another file format before listening.  MediaMonkey standard appears to limit MP3 conversions (but I love the software otherwise) so I thought that I would like to convert it into OGG instead (and OGG seems to have a better rate of compression than MP3 anyway).

  I found it by listening to these podcasts I can pause successfully to create a restore point, and when I come back, it takes up very well, as long as the device has not been driven off the coast between the two.  If the unit has cycled and turn it back on, when I come back to try to resume, it tries (he lists even the index of screen time) but then says "no file type supported" and fails to resume.  I tested on my old Fuze and do not have the same problem.

  Others experiencing the same thing?  I want to make sure that if it is just a simple bug of Sandisk is aware of this and can provide a fix in a future update.

  BTW, I'm using firmware 1.32.00 (latest as of this post).

  This seems to have been fixed with the latest firmware.

• Sat Pro A60 - screen backlight turns off after the connection with the Vodafone 3g data card

  I have a Sam Pro A60 which took a mounted Vodafone 3g data card. It connects OK data card but then the screen becomes 'empty' you can see the icons if you get the light from the window in the right direction, but permanently unusable.

  A reboot and the screen comes back. Are there keys, I can try to put light or ideas to test if it's a hardware or software problem?
  Thanks in advance.

  Hello

  It s a very strange problem. But I'll try my best ;)

  I noticed a similar problem on my second book. The display light didn't stop but the blue screen of death (BSOD) appeared and I could not continue my work.

  After a lengthy investigation, I found some useful tips.
  Someone told me that I have to disable HT technology (Hyper-Threading Technology) in the system BIOS settings.

  It's a key!

  As I remember the Satellite Pro A60 also supports this Hyper-Threading Technology.
  You can disable this function in the Toshiba HWSetup tool, in the CPU tab.

  Check it out and maybe it's a key as in my case.

  Dude good luck

• BlackBerry 8520 smartphones turned off and won't turn on! Help!

  I may be wrong pressed a few buttons (sleep) and I woke up to see my vocation as a voice configuration 8520 and it was completed at 98% (so I thought it was better to leave full since he was almost finished). I woke up again a few hours later and she's not coming. I removed the battery several times, but only the red light comes on for a few seconds then it turns off and the screen remains blank... What I've done wrong and what I would do!

  Leave the device in 2 or 3 hours of charging and then, still connected to the charger cable, remove the battery of the device a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage). If it is not restart on the first attempt, leave several hours. I had a charge for two days before, she came back to life after extreme exhaustion of the battery. Every 3-4 hours with the device plugged into the charger, you can remove and replace the battery to see if it restarts.

  If this does not work, if your BlackBerry remains powered turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.